MdeModulePkg:
* add defines
* add PcdDetectPs2KbOnCmdAck
DasharoPayloadPkg:
* detect PS/2 keyboard by sending it an "echo" command if
Dasharo/Ps2Controller is enabled or doesn't exist
* remove PS/2 from ConIn if the variable exists and the keyboard is not
connected or is disabled
This PR introduces a new feature to enable infinite boot retries based on a newly created PCD.
When true, the system will continuously loop over all boot options.
PCD default is FALSE to match existing functionality.
This change is tested on QEMU based virtual platforms and physical
platforms.
This change is useful for certain server cases. Infinite retries allows
a server to continuously attempt boot in case of network failure and
recovery, and for such attempts to be accurately recorded in the TCG
logs.
Co-authored-by: Kun Qin <kun.qin@microsoft.com>
Co-authored-by: Aaron Pop <aaron.pop@microsoft.com>
Co-authored-by: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Sherry Fan <sherryfan@microsoft.com>
Some large capacity SATA HDD requires more time from power on
to ready state.
Making timeout value configurable by defining PCD
PcdSataDeviceReadyTimeout will allow platform.dsc to serve these
devices.
Defining gEfiMdeModulePkgTokenSpaceGuid.PcdSataDeviceReadyTimeout
with default value 16 Seconds in MdeModulePkg.dec.
Signed-off-by: gapandya <gaurav.pandya@amd.com>
Currently, there is no mechanism for platforms to enable or disable
support for EmbeddedDrivers in capsule updates. This patch introduces
a new PCD, PcdEmbeddedDriverSupport, allowing platforms to explicitly
control whether capsules containing EmbeddedDrivers are supported.
This ensures capsules with embedded drivers are rejected on platforms
that do not support them.
This is a breaking change.By default, PcdEmbeddedDriverSupport
is set to FALSE which disables embedded driver support in capsule updates
across all platforms unless explicitly enabled.
Platforms must opt-in by setting the PcdEmbeddedDriverSupport to TRUE
in order to enable support for capsules containing embedded drivers.
Signed-off-by: Pavithra Gurulingappa <gpavithr@qti.qualcomm.com>
edk2 is dropping support for the ARM32 architecture. This
commit removes ARM32 support from MdeModulePkg. This also
drops irrelevant VALID_ARCHITECTURE comments from infs that
are not arch specific.
Signed-off-by: Oliver Smith-Denny <osde@microsoft.com>
The current fixed value of 8 for `DELAYED_DISPATCH_MAX_ENTRIES` is
not large enough to accommodate platform usage. This change replaces
the macro with a PCD that can be configured by platforms.
In the case the default PCD value is too small, an error message
explaining that the PCD should be updated will be printed followed
by an assert.
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
RealTimeClockLib is an architectural implementation that is not
restricted to the embedded segment or any platform in particular.
So the header has been moved to MdeModulePkg.
And the package has been added to the relevant INF files.
Continuous-integration-options: PatchCheck.ignore-multi-package
Signed-off-by: Sachin Ganesh <sachinganesh@ami.com>
Adding to the previous commit deprecating
EFI_UNICODE_COLLATION_PROTOCOL_GUID in MdeModulePkg.
Cc: Sachin Ganesh <sachinganesh@ami.com>
Signed-off-by: Gowtham M <gowthamm@ami.com>
When set to TRUE, bit EFI_OS_INDICATIONS_FMP_CAPSULE_SUPPORTED of
OsIndications is set.
At the moment EDK never sets this bit (there is only definition with no
uses), maybe nothing actually checks its value. Whatever the reason is,
it seems like a good idea to make setting it possible.
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
This PPI is no longer used - the EHCI and XHCI host controller PEIMs
expose PEI_USB2_HOST_CONTROLLER_PPI instead.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Move PcdSerialRegisterBase from [PcdsFixedAtBuild, PcdsPatchableInModule]
section to [PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic,
PcdsDynamicEx] section to enable dynamic configuration.
Signed-off-by: Pranav V V <pranav.v.v@intel.com>
The PcdFfaTxRxPageCount can never be changed dynamically
and is configured at build time to specify the size of
the Rx/Tx buffers.
Therefore, make PcdFfaTxRxPageCount a PcdsFixedAtBuild PCD.
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Update the comments for PcdDxeNxMemoryProtectionPolicy
which contained old information.
Signed-off-by: Aaron Pop <aaronpop@microsoft.com>
Co-authored-by: Oliver Smith-Denny <osde@microsoft.com>
The Universal Graphics Adapter (UGA) is a graphic abstraction.
The UGA I/O and Draw protocols are deprecated since UEFI 2.0 was
introduced. Cf. the UEFI spec v2.9:
"Appendix L - EFI 1.10 Protocol Changes and Deprecation List"
section L.2 "Deprecated Protocols"
Remove the UGA support.
Signed-off-by: GuoMinJ <newexplorerj@gmail.com>
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Currently, ArmFfaLib uses an internally defined Guided HOB to pass
information about the Rx/Tx buffer set up by the first executing agent.
However, the GUID definition is solely specified in the DEC file, which
is inconsistent with other GUID definitions in MdeModulePkg. This change
relocates the GUID definition to the Include/Guid folder to ensure
consistency across the package.
Signed-off-by: Kun Qin <kun.qin@microsoft.com>
ArmFfaLib is an implementation of an industry specification-defined
interface with UEFI specific method of handling Rx/Tx buffer sharing
across multiple boot phases, which is more appropriately placed in
MdeModulePkg.
This update relocates the implementation of ArmFfaLib to MdeModulePkg,
thereby supporting the FFA call primitives for all other packages that
depend on this interface.
Continuous-integration-options: PatchCheck.ignore-multi-package
Signed-off-by: Kun Qin <kun.qin@microsoft.com>
There are 2 reasons to move TdxMeasurementLib LibraryClass from
UefiCpuPkg to MdeModulePkg:
1. TpmMeasurementLib.h is located at MdeModulePkg/Include/Library.
It is similiar as TdxMeasurementLib.h.
2. TdxMeasurementLib is designed for TDX Measurement, it can be called
from SecurityPkg. And it is not much related to UefiCpuPkg.
Based upon above consideration, it's better to move TdxMeasurementLib
LibraryClass from UefiCpuPkg to MdeModulePkg.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Signed-off-by: Ceping Sun <cepingx.sun@intel.com>
Implementation of MEDIA_SANITIZE_PROTOCOL for NIST
purge/clear actions with mapping to NVM Express native
commands.
Signed-off-by: Aaron Pop <aaronpop@microsoft.com>
The MM communicate buffer facilitates data sharing between non-MM
and MM code.
The MM IPL code allocates a "fixed" runtime type memory as the MM
communication buffer, and communicates its address and size to MM
Core via MmCommBuffer GUIDed HOB.
Here, "fixed" implies that the buffer's location remains constant
throughout the boot process.
Data is exchanged between the MM Communication PPI/Protocol and a
software MMI handler using this fixed MM communication buffer.
Signed-off-by: Hongbin1 Zhang <hongbin1.zhang@intel.com>
Co-authored-by: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Co-authored-by: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Cc: Dun Tan <dun.tan@intel.com>
Cc: Yuanhao Xie <yuanhao.xie@intel.com>
Fire an event if a long delay occurs when starting an NVMe device.
This can be used by platforms to draw pictures on the screen or
take other actions to notify a user or move boot forward.
Signed-off-by: Oliver Smith-Denny <osde@linux.microsoft.com>
Michał Żygowski
Sherry Fan
gapandya
Pavithra Gurulingappa
Oliver Smith-Denny
Michael Kubacki
INDIA\sachinganesh
Gowtham M
Sergii Dmytruk
Ard Biesheuvel
Pranav V V
Levi Yun
Aaron Pop
GuoMinJ
Kun Qin
Ceping Sun
INDIA\kanagavels
Ray Robles
Hongbin1 Zhang
Jason1 Lin
Sean Brogan