that use the Mach::linkedit_data_command type for the load commands that are
currently used in the MachOObjectFile constructor.
This contains the missing checks for LC_DATA_IN_CODE and
LC_LINKER_OPTIMIZATION_HINT load commands and the fields for the
Mach::linkedit_data_command type. Checking for other load commands that
use this type will be added later.
Also fixed a couple of places that was using sizeof(MachOObjectFile::LoadCommandInfo)
that should have been using sizeof(MachO::load_command).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280267 91177308-0d34-0410-b5e6-96231b3b80d8
This contains the two missing checks for LC_SEGMENT load command fields.
And checks for the Mach-O sections fields that would make them invalid.
With the new checks, some of the existing malformed file checks now trips one
of these instead of the issue it was having before so those tests were adjusted.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@278557 91177308-0d34-0410-b5e6-96231b3b80d8
This is where an LC_SEGMENT load command has a fileoff field that
extends past the end of the file.
Also fix llvm-nm and llvm-size to remove the errorToErrorCode() call so error messages are printed.
And needed to update a few test cases now that they do print the error messages just a
bit differently.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277845 91177308-0d34-0410-b5e6-96231b3b80d8
This allows ErrorAsOutParameter to work better with "optional" errors. For
example, consider a function where for certain input values it is known that
the function can't fail. This can now be written as:
Result foo(Arg X, Error *Err) {
ErrorAsOutParameter EAO(Err);
if (<Error Condition>) {
if (Err)
*Err = <report error>;
else
llvm_unreachable("Unexpected failure!");
}
}
Rather than having to construct an ErrorAsOutParameter under every conditional
where Err is known to be non-null.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@276430 91177308-0d34-0410-b5e6-96231b3b80d8
a good error message to be produced.
This is nearly the last libObject interface that used ErrorOr and the last one
that appears in llvm/include/llvm/Object/MachO.h . For Mach-O objects this is
just a clean up because it’s version of getSymbolAddress() can’t return an
error.
I will leave it to the experts on COFF and ELF to actually add meaning full
error messages in their tests if they wish. And also leave it to these experts
to change the last two ErrorOr interfaces in llvm/include/llvm/Object/ObjectFile.h
for createCOFFObjectFile() and createELFObjectFile() if they wish.
Since there are no test cases for COFF and ELF error cases with respect to
getSymbolAddress() in the test suite this is no functional change (NFC).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@273701 91177308-0d34-0410-b5e6-96231b3b80d8
Fix was:
1) Had to regenerate dwarfdump-test-zlib.elf-x86-64, dwarfdump-test-zlib-gnu.elf-x86-64
(because llvm-symbolizer-zlib.test uses that inputs for its purposes and failed).
2) Updated llvm-symbolizer-zlib.test (updated used call function address to match new files +
added one more check for newly created dwarfdump-test-zlib-gnu.elf-x86-64 binary input).
3) Updated comment in dwarfdump-test-zlib.cc.
Original commit message:
[llvm-dwarfdump] - Teach dwarfdump to decompress debug sections in zlib style.
Before this llvm-dwarfdump only recognized zlib-gnu compression style of headers,
this patch adds support for zlib style.
It looks reasonable to support both styles for dumping,
even if we are not going to suport generating of deprecated gnu one.
Differential revision: http://reviews.llvm.org/D20470
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@270557 91177308-0d34-0410-b5e6-96231b3b80d8
fix: forgot to commit the updated dwarfdump-test-zlib.elf-x86-64
Original commit message:
[llvm-dwarfdump] - Teach dwarfdump to decompress debug sections in zlib style.
Before this llvm-dwarfdump only recognized zlib-gnu compression style of headers,
this patch adds support for zlib style.
It looks reasonable to support both styles for dumping,
even if we are not going to suport generating of deprecated gnu one.
Differential revision: http://reviews.llvm.org/D20470
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@270543 91177308-0d34-0410-b5e6-96231b3b80d8
Before this llvm-dwarfdump only recognized zlib-gnu compression style of headers,
this patch adds support for zlib style.
It looks reasonable to support both styles for dumping,
even if we are not going to suport generating of deprecated gnu one.
Differential revision: http://reviews.llvm.org/D20470
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@270540 91177308-0d34-0410-b5e6-96231b3b80d8
part of the error message.
As the caller is the one that needs to add the name of where the "object file"
comes from to the error message as the object file could be in an archive, or
coming from a slice of a Mach-O universal file or a buffer created by a JIT.
In the cases of a Mach-O universal file the architecture name may or may not
also need to be printed which is up to the tool code. For example if the tool
code is only selecting the host architecture slice then that architecture name
is never printed.
This patch is the change to the libObject code and there will be follow on
commits for changes to the code for each tool.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268789 91177308-0d34-0410-b5e6-96231b3b80d8
load commands.
The existing test case in test/Object/macho-invalid.test for
macho-invalid-too-small-segment-load-command has a cmdsize of 55, while
being too small also it is not a multiple of 4. So when that check is added
this test case will produce a different error. So I constructed a new test case
that will trigger the intended error.
I also changed the error message to be consistent with the other malformed Mach-O
file error messages which prints the load command index. I also removed both
object_error::macho_load_segment_too_small and
object_error::macho_load_segment_too_many_sections from Object/Error.h
as they are not needed and can just use object_error::parse_failed and let the
error message string distinguish the specific error.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268652 91177308-0d34-0410-b5e6-96231b3b80d8
command has a size less than 8 bytes.
I think the existing test case in test/Object/macho-invalid.test for
macho64-invalid-too-small-load-command was trying to test for this but that
test case triggered a different error given how it was constructed. So I
constructed a new test case that would trigger this specific error.
I also changed the error message to be consistent with the other malformed Mach-O
file error messages. I also removed object_error::macho_small_load_command from
Object/Error.h as it is not needed and can just use object_error::parse_failed
and let the error message string distinguish the error.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268463 91177308-0d34-0410-b5e6-96231b3b80d8
command other than the first one is past the end of the load commands.
This is like the test case in test/Object/macho-invalid.test for
macho64-invalid-incomplete-load-command but it is the second load command
that is past the end of all the load commands instead of the first.
The code in the constructor for MachOObjectFile that loops over the load
commands used getNextLoadCommandInfo() which was not producing
a good error message. So that was fixed and a test case was added.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268403 91177308-0d34-0410-b5e6-96231b3b80d8
Produce another specific error message for a malformed Mach-O file when a symbol’s
section index is more than the number of sections. The existing test case in test/Object/macho-invalid.test
for macho-invalid-section-index-getSectionRawName now reports the error with the message indicating
that a symbol at a specific index has a bad section index and that bad section index value.
Again converting interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. Where the existing code reported the error with a
string message or an error code it was converted to do the same.
Also there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comment:
"// TODO: Actually report errors helpfully" and a call something like
consumeError(NameOrErr.takeError()) so the buggy code will not crash
since needed to deal with the Error.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268298 91177308-0d34-0410-b5e6-96231b3b80d8
Only one consumer (llvm-objdump) actually cared about the fact that there were
two triples. Others were actively working around the fact that the Triple
returned by getArch might have been invalid. As for llvm-objdump, it needs to
be acutely aware of both Triples anyway, so being generic in the exposed API is
no benefit.
Also rename the version of getArch returning a Triple. Users were having to
pass an unwanted nullptr to disambiguate the two, which was nasty.
The only functional change here is that armv7m and armv7em object files no
longer crash llvm-objdump.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267249 91177308-0d34-0410-b5e6-96231b3b80d8
Kevin Enderby
NAKAMURA Takumi
Lang Hames
George Rimar
Justin Bogner
Tim Northover