Even when we don't create a remainder loop (that is, when we unroll by 2), we
may duplicate nested loops into the remainder. This is complicated by the fact
the remainder may itself be either inserted into an outer loop, or at the top
level. In the latter case, we may need to create new top-level loops.
Differential Revision: https://reviews.llvm.org/D29156
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@293124 91177308-0d34-0410-b5e6-96231b3b80d8
Running non-LCSSA-preserving LoopSimplify followed by LCSSA on (roughly) the
same loop is incorrect, since LoopSimplify may break LCSSA arbitrarily higher
in the loop nest. Instead, run LCSSA first, and then run LCSSA-preserving
LoopSimplify on the result.
This fixes PR31718.
Differential Revision: https://reviews.llvm.org/D29055
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292854 91177308-0d34-0410-b5e6-96231b3b80d8
the library routine shared with the new PM and other code.
This assert checks that when LCSSA preservation is requested we start in
LCSSA form. Without this early assert, given *very* complex test cases
we can hit an assert or crash much later on when trying to preserve
LCSSA.
The new PM's loop simplify doesn't need to (and indeed can't) preserve
LCSSA as the new PM doesn't deal in transforms in the dependency graph.
But we asked the library to and shockingly, this didn't work very well!
Stop doing that. Now the assert will tell us immediately with existing
test cases. Before this, it took a pretty convoluted input to trigger
this.
However, sinking the assert also found a bug in LoopUnroll where we
asked simplifyLoop to preserve LCSSA *right before we reform it*. That's
kinda silly and unsurprising that it wasn't available. =D Stop doing
that too.
We also would assert that the unrolled loop was in LCSSA even if
preserving LCSSA was never requested! I don't have a test case or
anything here. I spotted it by inspection and it seems quite obvious. No
logic change anyways, that's just avoiding a spurrious assert.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292710 91177308-0d34-0410-b5e6-96231b3b80d8
Mostly straightforward changes; we just didn't do the computation before.
One sort of interesting change in LoopUnroll.cpp: we weren't handling
dominance for children of the loop latch correctly, but
foldBlockIntoPredecessor hid the problem for complete unrolling.
Currently punting on loop peeling; made some minor changes to isolate
that problem to LoopUnrollPeel.cpp.
Adds a flag -unroll-verify-domtree; it verifies the domtree immediately
after we finish updating it. This is on by default for +Asserts builds.
Differential Revision: https://reviews.llvm.org/D28073
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292447 91177308-0d34-0410-b5e6-96231b3b80d8
After r289755, the AssumptionCache is no longer needed. Variables affected by
assumptions are now found by using the new operand-bundle-based scheme. This
new scheme is more computationally efficient, and also we need much less
code...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289756 91177308-0d34-0410-b5e6-96231b3b80d8
This implements PGO-driven loop peeling.
The basic idea is that when the average dynamic trip-count of a loop is known,
based on PGO, to be low, we can expect a performance win by peeling off the
first several iterations of that loop.
Unlike unrolling based on a known trip count, or a trip count multiple, this
doesn't save us the conditional check and branch on each iteration. However,
it does allow us to simplify the straight-line code we get (constant-folding,
etc.). This is important given that we know that we will usually only hit this
code, and not the actual loop.
This is currently disabled by default.
Differential Revision: https://reviews.llvm.org/D25963
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288274 91177308-0d34-0410-b5e6-96231b3b80d8
When we have a loop with a known upper bound on the number of iterations, and
furthermore know that either the number of iterations will be either exactly
that upper bound or zero, then we can fully unroll up to that upper bound
keeping only the first loop test to check for the zero iteration case.
Most of the work here is in plumbing this 'max-or-zero' information from the
part of scalar evolution where it's detected through to loop unrolling. I've
also gone for the safe default of 'false' everywhere but howManyLessThans which
could probably be improved.
Differential Revision: https://reviews.llvm.org/D25682
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284818 91177308-0d34-0410-b5e6-96231b3b80d8
Reappy r284044 after revert in r284051. Krzysztof fixed the error in r284049.
The original summary:
This patch tries to fully unroll loops having break statement like this
for (int i = 0; i < 8; i++) {
if (a[i] == value) {
found = true;
break;
}
}
GCC can fully unroll such loops, but currently LLVM cannot because LLVM only
supports loops having exact constant trip counts.
The upper bound of the trip count can be obtained from calling
ScalarEvolution::getMaxBackedgeTakenCount(). Part of the patch is the
refactoring work in SCEV to prevent duplicating code.
The feature of using the upper bound is enabled under the same circumstance
when runtime unrolling is enabled since both are used to unroll loops without
knowing the exact constant trip count.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284053 91177308-0d34-0410-b5e6-96231b3b80d8
This patch tries to fully unroll loops having break statement like this
for (int i = 0; i < 8; i++) {
if (a[i] == value) {
found = true;
break;
}
}
GCC can fully unroll such loops, but currently LLVM cannot because LLVM only
supports loops having exact constant trip counts.
The upper bound of the trip count can be obtained from calling
ScalarEvolution::getMaxBackedgeTakenCount(). Part of the patch is the
refactoring work in SCEV to prevent duplicating code.
The feature of using the upper bound is enabled under the same circumstance
when runtime unrolling is enabled since both are used to unroll loops without
knowing the exact constant trip count.
Differential Revision: https://reviews.llvm.org/D24790
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284044 91177308-0d34-0410-b5e6-96231b3b80d8
Clearing out the AssumptionCache can cause us to rescan the entire
function for assumes. If there are many loops, then we are scanning
over the entire function many times.
Instead of clearing out the AssumptionCache, register all cloned
assumes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@278854 91177308-0d34-0410-b5e6-96231b3b80d8
As agreed in post-commit review of r265388, I'm switching the flag to
its original value until the 90% runtime performance regression on
SingleSource/Benchmarks/Stanford/Bubblesort is addressed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277524 91177308-0d34-0410-b5e6-96231b3b80d8
LoopUnroll is a loop pass, so the analysis of OptimizationRemarkEmitter
is added to the common function analysis passes that loop passes
depend on.
The BFI and indirectly BPI used in this pass is computed lazily so no
overhead should be observed unless -pass-remarks-with-hotness is used.
This is how the patch affects the O3 pipeline:
Dominator Tree Construction
Natural Loop Information
Canonicalize natural loops
Loop-Closed SSA Form Pass
Basic Alias Analysis (stateless AA impl)
Function Alias Analysis Results
Scalar Evolution Analysis
+ Lazy Branch Probability Analysis
+ Lazy Block Frequency Analysis
+ Optimization Remark Emitter
Loop Pass Manager
Rotate Loops
Loop Invariant Code Motion
Unswitch loops
Simplify the CFG
Dominator Tree Construction
Basic Alias Analysis (stateless AA impl)
Function Alias Analysis Results
Combine redundant instructions
Natural Loop Information
Canonicalize natural loops
Loop-Closed SSA Form Pass
Scalar Evolution Analysis
+ Lazy Branch Probability Analysis
+ Lazy Block Frequency Analysis
+ Optimization Remark Emitter
Loop Pass Manager
Induction Variable Simplification
Recognize loop idioms
Delete dead loops
Unroll loops
...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277203 91177308-0d34-0410-b5e6-96231b3b80d8
r273711 was reverted by r273743. The inliner needs to know about any
call sites in the inlined function. These were obscured if we replaced
a call to undef with an undef but kept the call around.
This fixes PR28298.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@273753 91177308-0d34-0410-b5e6-96231b3b80d8
We cannot remove an instruction with no uses just because
SimplifyInstruction succeeds. It may have side effects.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@273711 91177308-0d34-0410-b5e6-96231b3b80d8
Michael Kuperstein
Chandler Carruth
Eli Friedman
Florian Hahn
Philip Reames
Haicheng Wu
Daniel Jasper
Hal Finkel
John Brawn
Adam Nemet
David Majnemer
Michael Zolotukhin
Davide Italiano
Nico Weber