Commit Graph

45 Commits

Author SHA1 Message Date
Krzysztof Parzyszek a8b917bef3 Treat segment [B, E) as not overlapping block with boundaries [A, B)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292446 91177308-0d34-0410-b5e6-96231b3b80d8
2017-01-18 23:12:19 +00:00
Malcolm Parsons 60f78e3e92 Remove unused lambda captures. NFC
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@291916 91177308-0d34-0410-b5e6-96231b3b80d8
2017-01-13 17:12:16 +00:00
Krzysztof Parzyszek 308c60d0cb Implement LaneBitmask::any(), use it to replace !none(), NFCI
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289974 91177308-0d34-0410-b5e6-96231b3b80d8
2016-12-16 19:11:56 +00:00
Krzysztof Parzyszek d6ca3f019d Extract LaneBitmask into a separate type
Specifically avoid implicit conversions from/to integral types to
avoid potential errors when changing the underlying type. For example,
a typical initialization of a "full" mask was "LaneMask = ~0u", which
would result in a value of 0x00000000FFFFFFFF if the type was extended
to uint64_t.

Differential Revision: https://reviews.llvm.org/D27454


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289820 91177308-0d34-0410-b5e6-96231b3b80d8
2016-12-15 14:36:06 +00:00
Matthias Braun b0731963da LiveRangeCalc: Fix reporting of invalid vreg usage in liveness calculation
Machine programs need a definition of each vreg before reaching a use
(the definition may come from an IMPLICIT_DEF instruction). This class
of errors is not detected by the MachineVerifier because of efficiency
concerns. LiveRangeCalc used to report these problems, make it do that
again (followup to r279625).

Also use report_fatal_error() instead of llvm_unreachable() as the error
reporting is only present in asserts build anyway.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@281914 91177308-0d34-0410-b5e6-96231b3b80d8
2016-09-19 16:49:45 +00:00
Matt Arsenault 59ff7095a9 Improve debug error message with register name
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280583 91177308-0d34-0410-b5e6-96231b3b80d8
2016-09-03 06:57:49 +00:00
Krzysztof Parzyszek 57c58d3969 Do not consider subreg defs as reads when computing subrange liveness
Subregister definitions are considered uses for the purpose of tracking
liveness of the whole register. At the same time, when calculating live
interval subranges, subregister defs should not be treated as uses.

Differential Revision: https://reviews.llvm.org/D24190


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280532 91177308-0d34-0410-b5e6-96231b3b80d8
2016-09-02 19:48:55 +00:00
Krzysztof Parzyszek adef5a6968 Do not use MRI::getMaxLaneMaskForVReg as a mask covering whole register
MRI::getMaxLaneMaskForVReg does not always cover the whole register.
For example, on X86 the upper 16 bits of EAX cannot be accessed via
any subregister. Consequently, there is no lane mask that only covers
that part of EAX. The getMaxLaneMaskForVReg will return the union of
the lane masks for all subregisters, and in case of EAX, that union
will not cover the upper 16 bits.

This fixes https://llvm.org/bugs/show_bug.cgi?id=29132


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@279969 91177308-0d34-0410-b5e6-96231b3b80d8
2016-08-29 13:15:35 +00:00
Krzysztof Parzyszek 31a5f885bf Create subranges for new intervals resulting from live interval splitting
The register allocator can split a live interval of a register into a set
of smaller intervals. After the allocation of registers is complete, the
rewriter will modify the IR to replace virtual registers with the corres-
ponding physical registers. At this stage, if a register corresponding
to a subregister of a virtual register is used, the rewriter will check
if that subregister is undefined, and if so, it will add the <undef> flag
to the machine operand. The function verifying liveness of the subregis-
ter would assume that it is undefined, unless any of the subranges of the
live interval proves otherwise.
The problem is that the live intervals created during splitting do not
have any subranges, even if the original parent interval did. This could
result in the <undef> flag placed on a register that is actually defined.

Differential Revision: http://reviews.llvm.org/D21189


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@279625 91177308-0d34-0410-b5e6-96231b3b80d8
2016-08-24 13:37:55 +00:00
Matthias Braun 6054e84d82 LiveIntervalAnalysis: Rework constructMainRangeFromSubranges()
We now use LiveRangeCalc::extendToUses() instead of a specially designed
algorithm in constructMainRangeFromSubranges():
- The original motivation for constructMainRangeFromSubranges() were
  differences between the main liverange and subranges because of hidden
  dead definitions. This case however cannot happen anymore with the
  DetectDeadLaneMasks pass in place.
- It simplifies the code.
- This fixes a longstanding bug where we did not properly create new SSA
  values on merging control flow (the MachineVerifier missed most of
  these cases).
- Move constructMainRangeFromSubranges() to LiveIntervalAnalysis and
  LiveRangeCalc to better match the implementation/available helper
  functions.

This re-applies r269016. The fixes from r270290 and r270259 should avoid
the machine verifier problems this time.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@270291 91177308-0d34-0410-b5e6-96231b3b80d8
2016-05-20 23:14:56 +00:00
Tom Stellard c37b54dfc5 Revert "LiveIntervalAnalysis: Rework constructMainRangeFromSubranges()"
This reverts commit r269016 and also the follow-up commit r269020.

This patch caused PR27705.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@269344 91177308-0d34-0410-b5e6-96231b3b80d8
2016-05-12 20:27:40 +00:00
Matthias Braun e607e01664 LiveIntervalAnalysis: Rework constructMainRangeFromSubranges()
We now use LiveRangeCalc::extendToUses() instead of a specially designed
algorithm in constructMainRangeFromSubranges():
- The original motivation for constructMainRangeFromSubranges() were
  differences between the main liverange and subranges because of hidden
  dead definitions. This case however cannot happen anymore with the
  DetectDeadLaneMasks pass in place.
- It simplifies the code.
- This fixes a longstanding bug where we did not properly create new SSA
  values on merging control flow (the MachineVerifier missed most of
  these cases).
- Move constructMainRangeFromSubranges() to LiveIntervalAnalysis and
  LiveRangeCalc to better match the implementation/available helper
  functions.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@269016 91177308-0d34-0410-b5e6-96231b3b80d8
2016-05-10 04:51:14 +00:00
Duncan P. N. Exon Smith 42e18357c5 CodeGen: Take MachineInstr& in SlotIndexes and LiveIntervals, NFC
Take MachineInstr by reference instead of by pointer in SlotIndexes and
the SlotIndex wrappers in LiveIntervals.  The MachineInstrs here are
never null, so this cleans up the API a bit.  It also incidentally
removes a few implicit conversions from MachineInstrBundleIterator to
MachineInstr* (see PR26753).

At a couple of call sites it was convenient to convert to a range-based
for loop over MachineBasicBlock::instr_begin/instr_end, so I added
MachineBasicBlock::instrs.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@262115 91177308-0d34-0410-b5e6-96231b3b80d8
2016-02-27 06:40:41 +00:00
Matthias Braun dfc5b65a74 TargetRegisterInfo: Add typedef unsigned LaneBitmask and use it where apropriate; NFC
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@248623 91177308-0d34-0410-b5e6-96231b3b80d8
2015-09-25 21:51:14 +00:00
Matthias Braun 948b20ecb3 LiveRangeCalc: Improve error messages on malformed IR
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237008 91177308-0d34-0410-b5e6-96231b3b80d8
2015-05-11 18:47:47 +00:00
Matthias Braun 5101c89f13 Do not track subregister liveness when it brings no benefits
Some subregisters are only to indicate different access sizes, while not
providing any way to actually divide the register up into multiple
disjunct parts. Avoid tracking subregister liveness in these cases as it
is not beneficial.

Differential Revision: http://reviews.llvm.org/D8429

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232695 91177308-0d34-0410-b5e6-96231b3b80d8
2015-03-19 00:21:58 +00:00
Matthias Braun b2c6bf6776 LiveRangeCalc: Don't start liveranges of PHI instruction at the block begin.
Summary:
Letting them begin at the PHI instruction slightly simplifies the code
but more importantly avoids breaking the assumption that live ranges
starting at the block begin are also live at the end of the predecessor
blocks. The MachineVerifier checks that but was apparently never run in
the few instances where liveranges are calculated for machine-SSA
functions.

Reviewers: qcolombet

Subscribers: llvm-commits

Differential Revision: http://reviews.llvm.org/D7779

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230093 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-20 23:43:14 +00:00
Matthias Braun 62be98d510 LiveRangeCalc: Rename some parameters from kill to use, NFC.
Those parameters did not necessarily describe kill points but just uses.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229601 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-18 01:50:52 +00:00
Matthias Braun 8882414a11 LiveInterval: Introduce createMainRangeFromSubranges().
This function constructs the main liverange by merging all subranges if
subregister liveness tracking is available. This should be slightly
faster to compute instead of performing the liveness calculation again
for the main range. More importantly it avoids cases where the main
liverange would cover positions where no subrange was live. These cases
happened for partial definitions where the actual defined part was dead
and only the undefined parts used later.

The register coalescing requires that every part covered by the main
live range has at least one subrange live.

I also expect this function to become usefull later for places where the
subranges are modified in a way that it is hard to correctly fix the
main liverange in the machine scheduler, we can simply reconstruct it
from subranges then.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224806 91177308-0d34-0410-b5e6-96231b3b80d8
2014-12-24 02:11:51 +00:00
Matthias Braun 68445710a2 LiveRangeCalc: Rewrite subrange calculation
This changes subrange calculation to calculate subranges sequentially
instead of in parallel. The code is easier to understand that way and
addresses the code review issues raised about LiveOutData being
hard to understand/needing more comments by removing them :)

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224313 91177308-0d34-0410-b5e6-96231b3b80d8
2014-12-16 04:03:38 +00:00
Matthias Braun 4151e89f1e Revert "LiveRangeCalc: Rewrite subrange calculation"
Revert until I find out why non-subreg enabled targets break.

This reverts commit 6097277eef.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224278 91177308-0d34-0410-b5e6-96231b3b80d8
2014-12-15 21:36:35 +00:00
Matthias Braun 6097277eef LiveRangeCalc: Rewrite subrange calculation
This changes subrange calculation to calculate subranges sequentially
instead of in parallel. The code is easier to understand that way and
addresses the code review issues raised about LiveOutData being
hard to understand/needing more comments by removing them :)

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224272 91177308-0d34-0410-b5e6-96231b3b80d8
2014-12-15 21:16:21 +00:00
Matthias Braun 908d623dff LiveRangeCalc: use more range based for loops; NFC
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224263 91177308-0d34-0410-b5e6-96231b3b80d8
2014-12-15 19:40:46 +00:00
Matthias Braun 1bfcc2d56f LiveInterval: Use range based for loops for subregister ranges.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223991 91177308-0d34-0410-b5e6-96231b3b80d8
2014-12-11 00:59:06 +00:00
Aaron Ballman 7e1839ff01 Silencing a -Wsequence-point warning, and the resulting undefined behavior. NFC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223926 91177308-0d34-0410-b5e6-96231b3b80d8
2014-12-10 14:14:54 +00:00