ARM 64 uses -fpatchable-function-entry=4,2 which adds padding before the
function and the addresses in the mcount_loc point there instead of the
function entry that is returned by nm. In order to find a function from nm
to make sure it's not an unused weak function, the entries in the
mcount_loc section needs to match the entries from nm. Since it can be an
instruction before the entry, add a before_func variable that ARM 64 can
set to 8, and if the mcount_loc entry is within 8 bytes of the nm function
entry, then it will be considered a match.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: "Arnd Bergmann" <arnd@arndb.de>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/20250225182054.815536219@goodmis.org
Fixes: ef378c3b82 ("scripts/sorttable: Zero out weak functions in mcount_loc table")
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When a function is annotated as "weak" and is overridden, the code is not
removed. If it is traced, the fentry/mcount location in the weak function
will be referenced by the "__mcount_loc" section. This will then be added
to the available_filter_functions list. Since only the address of the
functions are listed, to find the name to show, a search of kallsyms is
used.
Since kallsyms will return the function by simply finding the function
that the address is after but before the next function, an address of a
weak function will show up as the function before it. This is because
kallsyms does not save names of weak functions. This has caused issues in
the past, as now the traced weak function will be listed in
available_filter_functions with the name of the function before it.
At best, this will cause the previous function's name to be listed twice.
At worse, if the previous function was marked notrace, it will now show up
as a function that can be traced. Note that it only shows up that it can
be traced but will not be if enabled, which causes confusion.
https://lore.kernel.org/all/20220412094923.0abe90955e5db486b7bca279@kernel.org/
The commit b39181f7c6 ("ftrace: Add FTRACE_MCOUNT_MAX_OFFSET to avoid
adding weak function") was a workaround to this by checking the function
address before printing its name. If the address was too far from the
function given by the name then instead of printing the name it would
print: __ftrace_invalid_address___<invalid-offset>
The real issue is that these invalid addresses are listed in the ftrace
table look up which available_filter_functions is derived from. A place
holder must be listed in that file because set_ftrace_filter may take a
series of indexes into that file instead of names to be able to do O(1)
lookups to enable filtering (many tools use this method).
Even if kallsyms saved the size of the function, it does not remove the
need of having these place holders. The real solution is to not add a weak
function into the ftrace table in the first place.
To solve this, the sorttable.c code that sorts the mcount regions during
the build is modified to take a "nm -S vmlinux" input, sort it, and any
function listed in the mcount_loc section that is not within a boundary of
the function list given by nm is considered a weak function and is zeroed
out.
Note, this does not mean they will remain zero when booting as KASLR
will still shift those addresses. To handle this, the entries in the
mcount_loc section will be ignored if they are zero or match the
kaslr_offset() value.
Before:
~# grep __ftrace_invalid_address___ /sys/kernel/tracing/available_filter_functions | wc -l
551
After:
~# grep __ftrace_invalid_address___ /sys/kernel/tracing/available_filter_functions | wc -l
0
Cc: bpf <bpf@vger.kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Cc: Martin Kelly <martin.kelly@crowdstrike.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/20250218200022.883095980@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
This is a LoongArch port of commit d6e2cc5647 ("arm64: extable: add
`type` and `data` fields").
Subsequent patches will add specialized handlers for fixups, in addition
to the simple PC fixup we have today. In preparation, this patch adds a
new `type` field to struct exception_table_entry, and uses this to
distinguish the fixup and other cases. A `data` field is also added so
that subsequent patches can associate data specific to each exception
site (e.g. register numbers).
Handlers are named ex_handler_*() for consistency, following the example
of x86. At the same time, get_ex_fixup() is split out into a helper so
that it can be used by other ex_handler_*() functions in the subsequent
patches.
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Similar to other architectures such as arm64, x86, riscv and so on, use
offsets relative to the exception table entry values rather than their
absolute addresses for both the exception location and the fixup.
However, LoongArch label difference because it will actually produce two
relocations, a pair of R_LARCH_ADD32 and R_LARCH_SUB32. Take simple code
below for example:
$ cat test_ex_table.S
.section .text
1:
nop
.section __ex_table,"a"
.balign 4
.long (1b - .)
.previous
$ loongarch64-unknown-linux-gnu-gcc -c test_ex_table.S
$ loongarch64-unknown-linux-gnu-readelf -Wr test_ex_table.o
Relocation section '.rela__ex_table' at offset 0x100 contains 2 entries:
Offset Info Type Symbol's Value Symbol's Name + Addend
0000000000000000 0000000600000032 R_LARCH_ADD32 0000000000000000 .L1^B1 + 0
0000000000000000 0000000500000037 R_LARCH_SUB32 0000000000000000 L0^A + 0
The modpost will complain the R_LARCH_SUB32 relocation, so we need to
patch modpost.c to skip this relocation for .rela__ex_table section.
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Follow arm64, riscv, and x86 and change extable layout to common
"relative table with data". This allows to get rid of s390 specific
code in sorttable.c.
The main difference to before is that extable entries do not contain a
relative function pointer anymore. Instead data and type fields are
added.
The type field is used to indicate which exception handler needs to be
called, while the data field is currently unused.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Pull RISC-V updates from Palmer Dabbelt:
- Support for the DA9063 as used on the HiFive Unmatched.
- Support for relative extables, which puts us in line with other
architectures and save some space in vmlinux.
- A handful of kexec fixes/improvements, including the ability to run
crash kernels from PCI-addressable memory on the HiFive Unmatched.
- Support for the SBI SRST extension, which allows systems that do not
have an explicit driver in Linux to reboot.
- A handful of fixes and cleanups, including to the defconfigs and
device trees.
* tag 'riscv-for-linus-5.17-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (52 commits)
RISC-V: Use SBI SRST extension when available
riscv: mm: fix wrong phys_ram_base value for RV64
RISC-V: Use common riscv_cpuid_to_hartid_mask() for both SMP=y and SMP=n
riscv: head: remove useless __PAGE_ALIGNED_BSS and .balign
riscv: errata: alternative: mark vendor_patch_func __initdata
riscv: head: make secondary_start_common() static
riscv: remove cpu_stop()
riscv: try to allocate crashkern region from 32bit addressible memory
riscv: use hart id instead of cpu id on machine_kexec
riscv: Don't use va_pa_offset on kdump
riscv: dts: sifive: fu540-c000: Fix PLIC node
riscv: dts: sifive: fu540-c000: Drop bogus soc node compatible values
riscv: dts: sifive: Group tuples in register properties
riscv: dts: sifive: Group tuples in interrupt properties
riscv: dts: microchip: mpfs: Group tuples in interrupt properties
riscv: dts: microchip: mpfs: Fix clock controller node
riscv: dts: microchip: mpfs: Fix reference clock node
riscv: dts: microchip: mpfs: Fix PLIC node
riscv: dts: microchip: mpfs: Drop empty chosen node
riscv: dts: canaan: Group tuples in interrupt properties
...
This is a riscv port of commit d6e2cc5647 ("arm64: extable: add `type`
and `data` fields").
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
