mirror of
https://github.com/AtlasLinux/linux.git
synced 2026-02-02 15:22:09 -08:00
master
1806 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
6093a688a0 |
Merge tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Char/Misc/IIO/Binder updates from Greg KH:
"Here is the big set of char/misc/iio and other driver subsystem
changes for 6.18-rc1.
Loads of different stuff in here, it was a busy development cycle in
lots of different subsystems, with over 27k new lines added to the
tree.
Included in here are:
- IIO updates including new drivers, reworking of existing apis, and
other goodness in the sensor subsystems
- MEI driver updates and additions
- NVMEM driver updates
- slimbus removal for an unused driver and some other minor updates
- coresight driver updates and additions
- MHI driver updates
- comedi driver updates and fixes
- extcon driver updates
- interconnect driver additions
- eeprom driver updates and fixes
- minor UIO driver updates
- tiny W1 driver updates
But the majority of new code is in the rust bindings and additions,
which includes:
- misc driver rust binding updates for read/write support, we can now
write "normal" misc drivers in rust fully, and the sample driver
shows how this can be done.
- Initial framework for USB driver rust bindings, which are disabled
for now in the build, due to limited support, but coming in through
this tree due to dependencies on other rust binding changes that
were in here. I'll be enabling these back on in the build in the
usb.git tree after -rc1 is out so that developers can continue to
work on these in linux-next over the next development cycle.
- Android Binder driver implemented in Rust.
This is the big one, and was driving a huge majority of the rust
binding work over the past years. Right now there are two binder
drivers in the kernel, selected only at build time as to which one
to use as binder wants to be included in the system at boot time.
The binder C maintainers all agreed on this, as eventually, they
want the C code to be removed from the tree, but it will take a few
releases to get there while both are maintained to ensure that the
rust implementation is fully stable and compliant with the existing
userspace apis.
All of these have been in linux-next for a while"
* tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (320 commits)
rust: usb: keep usb::Device private for now
rust: usb: don't retain device context for the interface parent
USB: disable rust bindings from the build for now
samples: rust: add a USB driver sample
rust: usb: add basic USB abstractions
coresight: Add label sysfs node support
dt-bindings: arm: Add label in the coresight components
coresight: tnoc: add new AMBA ID to support Trace Noc V2
coresight: Fix incorrect handling for return value of devm_kzalloc
coresight: tpda: fix the logic to setup the element size
coresight: trbe: Return NULL pointer for allocation failures
coresight: Refactor runtime PM
coresight: Make clock sequence consistent
coresight: Refactor driver data allocation
coresight: Consolidate clock enabling
coresight: Avoid enable programming clock duplicately
coresight: Appropriately disable trace bus clocks
coresight: Appropriately disable programming clocks
coresight: etm4x: Support atclk
coresight: catu: Support atclk
...
|
||
|
Linus Torvalds
|
8804d970fa |
Merge tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "mm, swap: improve cluster scan strategy" from Kairui Song improves
performance and reduces the failure rate of swap cluster allocation
- "support large align and nid in Rust allocators" from Vitaly Wool
permits Rust allocators to set NUMA node and large alignment when
perforning slub and vmalloc reallocs
- "mm/damon/vaddr: support stat-purpose DAMOS" from Yueyang Pan extend
DAMOS_STAT's handling of the DAMON operations sets for virtual
address spaces for ops-level DAMOS filters
- "execute PROCMAP_QUERY ioctl under per-vma lock" from Suren
Baghdasaryan reduces mmap_lock contention during reads of
/proc/pid/maps
- "mm/mincore: minor clean up for swap cache checking" from Kairui Song
performs some cleanup in the swap code
- "mm: vm_normal_page*() improvements" from David Hildenbrand provides
code cleanup in the pagemap code
- "add persistent huge zero folio support" from Pankaj Raghav provides
a block layer speedup by optionalls making the
huge_zero_pagepersistent, instead of releasing it when its refcount
falls to zero
- "kho: fixes and cleanups" from Mike Rapoport adds a few touchups to
the recently added Kexec Handover feature
- "mm: make mm->flags a bitmap and 64-bit on all arches" from Lorenzo
Stoakes turns mm_struct.flags into a bitmap. To end the constant
struggle with space shortage on 32-bit conflicting with 64-bit's
needs
- "mm/swapfile.c and swap.h cleanup" from Chris Li cleans up some swap
code
- "selftests/mm: Fix false positives and skip unsupported tests" from
Donet Tom fixes a few things in our selftests code
- "prctl: extend PR_SET_THP_DISABLE to only provide THPs when advised"
from David Hildenbrand "allows individual processes to opt-out of
THP=always into THP=madvise, without affecting other workloads on the
system".
It's a long story - the [1/N] changelog spells out the considerations
- "Add and use memdesc_flags_t" from Matthew Wilcox gets us started on
the memdesc project. Please see
https://kernelnewbies.org/MatthewWilcox/Memdescs and
https://blogs.oracle.com/linux/post/introducing-memdesc
- "Tiny optimization for large read operations" from Chi Zhiling
improves the efficiency of the pagecache read path
- "Better split_huge_page_test result check" from Zi Yan improves our
folio splitting selftest code
- "test that rmap behaves as expected" from Wei Yang adds some rmap
selftests
- "remove write_cache_pages()" from Christoph Hellwig removes that
function and converts its two remaining callers
- "selftests/mm: uffd-stress fixes" from Dev Jain fixes some UFFD
selftests issues
- "introduce kernel file mapped folios" from Boris Burkov introduces
the concept of "kernel file pages". Using these permits btrfs to
account its metadata pages to the root cgroup, rather than to the
cgroups of random inappropriate tasks
- "mm/pageblock: improve readability of some pageblock handling" from
Wei Yang provides some readability improvements to the page allocator
code
- "mm/damon: support ARM32 with LPAE" from SeongJae Park teaches DAMON
to understand arm32 highmem
- "tools: testing: Use existing atomic.h for vma/maple tests" from
Brendan Jackman performs some code cleanups and deduplication under
tools/testing/
- "maple_tree: Fix testing for 32bit compiles" from Liam Howlett fixes
a couple of 32-bit issues in tools/testing/radix-tree.c
- "kasan: unify kasan_enabled() and remove arch-specific
implementations" from Sabyrzhan Tasbolatov moves KASAN arch-specific
initialization code into a common arch-neutral implementation
- "mm: remove zpool" from Johannes Weiner removes zspool - an
indirection layer which now only redirects to a single thing
(zsmalloc)
- "mm: task_stack: Stack handling cleanups" from Pasha Tatashin makes a
couple of cleanups in the fork code
- "mm: remove nth_page()" from David Hildenbrand makes rather a lot of
adjustments at various nth_page() callsites, eventually permitting
the removal of that undesirable helper function
- "introduce kasan.write_only option in hw-tags" from Yeoreum Yun
creates a KASAN read-only mode for ARM, using that architecture's
memory tagging feature. It is felt that a read-only mode KASAN is
suitable for use in production systems rather than debug-only
- "mm: hugetlb: cleanup hugetlb folio allocation" from Kefeng Wang does
some tidying in the hugetlb folio allocation code
- "mm: establish const-correctness for pointer parameters" from Max
Kellermann makes quite a number of the MM API functions more accurate
about the constness of their arguments. This was getting in the way
of subsystems (in this case CEPH) when they attempt to improving
their own const/non-const accuracy
- "Cleanup free_pages() misuse" from Vishal Moola fixes a number of
code sites which were confused over when to use free_pages() vs
__free_pages()
- "Add Rust abstraction for Maple Trees" from Alice Ryhl makes the
mapletree code accessible to Rust. Required by nouveau and by its
forthcoming successor: the new Rust Nova driver
- "selftests/mm: split_huge_page_test: split_pte_mapped_thp
improvements" from David Hildenbrand adds a fix and some cleanups to
the thp selftesting code
- "mm, swap: introduce swap table as swap cache (phase I)" from Chris
Li and Kairui Song is the first step along the path to implementing
"swap tables" - a new approach to swap allocation and state tracking
which is expected to yield speed and space improvements. This
patchset itself yields a 5-20% performance benefit in some situations
- "Some ptdesc cleanups" from Matthew Wilcox utilizes the new memdesc
layer to clean up the ptdesc code a little
- "Fix va_high_addr_switch.sh test failure" from Chunyu Hu fixes some
issues in our 5-level pagetable selftesting code
- "Minor fixes for memory allocation profiling" from Suren Baghdasaryan
addresses a couple of minor issues in relatively new memory
allocation profiling feature
- "Small cleanups" from Matthew Wilcox has a few cleanups in
preparation for more memdesc work
- "mm/damon: add addr_unit for DAMON_LRU_SORT and DAMON_RECLAIM" from
Quanmin Yan makes some changes to DAMON in furtherance of supporting
arm highmem
- "selftests/mm: Add -Wunreachable-code and fix warnings" from Muhammad
Anjum adds that compiler check to selftests code and fixes the
fallout, by removing dead code
- "Improvements to Victim Process Thawing and OOM Reaper Traversal
Order" from zhongjinji makes a number of improvements in the OOM
killer: mainly thawing a more appropriate group of victim threads so
they can release resources
- "mm/damon: misc fixups and improvements for 6.18" from SeongJae Park
is a bunch of small and unrelated fixups for DAMON
- "mm/damon: define and use DAMON initialization check function" from
SeongJae Park implement reliability and maintainability improvements
to a recently-added bug fix
- "mm/damon/stat: expose auto-tuned intervals and non-idle ages" from
SeongJae Park provides additional transparency to userspace clients
of the DAMON_STAT information
- "Expand scope of khugepaged anonymous collapse" from Dev Jain removes
some constraints on khubepaged's collapsing of anon VMAs. It also
increases the success rate of MADV_COLLAPSE against an anon vma
- "mm: do not assume file == vma->vm_file in compat_vma_mmap_prepare()"
from Lorenzo Stoakes moves us further towards removal of
file_operations.mmap(). This patchset concentrates upon clearing up
the treatment of stacked filesystems
- "mm: Improve mlock tracking for large folios" from Kiryl Shutsemau
provides some fixes and improvements to mlock's tracking of large
folios. /proc/meminfo's "Mlocked" field became more accurate
- "mm/ksm: Fix incorrect accounting of KSM counters during fork" from
Donet Tom fixes several user-visible KSM stats inaccuracies across
forks and adds selftest code to verify these counters
- "mm_slot: fix the usage of mm_slot_entry" from Wei Yang addresses
some potential but presently benign issues in KSM's mm_slot handling
* tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (372 commits)
mm: swap: check for stable address space before operating on the VMA
mm: convert folio_page() back to a macro
mm/khugepaged: use start_addr/addr for improved readability
hugetlbfs: skip VMAs without shareable locks in hugetlb_vmdelete_list
alloc_tag: fix boot failure due to NULL pointer dereference
mm: silence data-race in update_hiwater_rss
mm/memory-failure: don't select MEMORY_ISOLATION
mm/khugepaged: remove definition of struct khugepaged_mm_slot
mm/ksm: get mm_slot by mm_slot_entry() when slot is !NULL
hugetlb: increase number of reserving hugepages via cmdline
selftests/mm: add fork inheritance test for ksm_merging_pages counter
mm/ksm: fix incorrect KSM counter handling in mm_struct during fork
drivers/base/node: fix double free in register_one_node()
mm: remove PMD alignment constraint in execmem_vmalloc()
mm/memory_hotplug: fix typo 'esecially' -> 'especially'
mm/rmap: improve mlock tracking for large folios
mm/filemap: map entire large folio faultaround
mm/fault: try to map the entire file folio in finish_fault()
mm/rmap: mlock large folios in try_to_unmap_one()
mm/rmap: fix a mlock race condition in folio_referenced_one()
...
|
||
|
Linus Torvalds
|
f79e772258 |
Merge tag 'media/v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab: - Added a new V4L2 clock helper - New camera sensor drivers - iris: Enable H.264/H.265 encoder support and fixes in iris driver common code - camss: add support for new SoC flavors - venus: add new SoC support - tc358743: support more infoframe types - Various fixes, driver improvements and cleanups * tag 'media/v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (439 commits) media: venus: pm_helpers: add fallback for the opp-table media: qcom: camss: vfe: Fix BPL alignment for QCM2290 media: tuner: xc5000: Fix use-after-free in xc5000_release media: i2c: tc358743: Fix use-after-free bugs caused by orphan timer in probe media: b2c2: Fix use-after-free causing by irq_check_work in flexcop_pci_remove media: vsp1: Export missing vsp1_isp_free_buffer symbol media: renesas: vsp1: Convert to SYSTEM_SLEEP/RUNTIME_PM_OPS() media: renesas: ceu: Convert to RUNTIME_PM_OPS() media: renesas: fdp1: Convert to RUNTIME_PM_OPS() media: renesas: rcar-vin: Convert to DEFINE_SIMPLE_DEV_PM_OPS() media: renesas: rcar_drif: Convert to DEFINE_SIMPLE_DEV_PM_OPS() media: uvcvideo: Mark invalid entities with id UVC_INVALID_ENTITY_ID media: uvcvideo: Support UVC_CROSXU_CONTROL_IQ_PROFILE media: uvcvideo: Run uvc_ctrl_init_ctrl for all controls media: uvcvideo: Shorten the transfer size non compliance message media: uvcvideo: Do not re-reference dev->udev media: uvcvideo: Use intf instead of udev for printks media: uvcvideo: Move video_device under video_queue media: uvcvideo: Drop stream->mutex media: uvcvideo: Move MSXU_CONTROL_METADATA definition to header ... |
||
|
Linus Torvalds
|
58809f614e |
Merge tag 'drm-next-2025-10-01' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"cross-subsystem:
- i2c-hid: Make elan touch controllers power on after panel is
enabled
- dt bindings for STM32MP25 SoC
- pci vgaarb: use screen_info helpers
- rust pin-init updates
- add MEI driver for late binding firmware update/load
uapi:
- add ioctl for reassigning GEM handles
- provide boot_display attribute on boot-up devices
core:
- document DRM_MODE_PAGE_FLIP_EVENT
- add vendor specific recovery method to drm device wedged uevent
gem:
- Simplify gpuvm locking
ttm:
- add interface to populate buffers
sched:
- Fix race condition in trace code
atomic:
- Reallow no-op async page flips
display:
- dp: Fix command length
video:
- Improve pixel-format handling for struct screen_info
rust:
- drop Opaque<> from ioctl args
- Alloc:
- BorrowedPage type and AsPageIter traits
- Implement Vmalloc::to_page() and VmallocPageIter
- DMA/Scatterlist:
- Add dma::DataDirection and type alias for dma_addr_t
- Abstraction for struct scatterlist and sg_table
- DRM:
- simplify use of generics
- add DriverFile type alias
- drop Object::SIZE
- Rust:
- pin-init tree merge
- Various methods for AsBytes and FromBytes traits
gpuvm:
- Support madvice in Xe driver
gpusvm:
- fix hmm_pfn_to_map_order usage in gpusvm
bridge:
- Improve and fix ref counting on bridge management
- cdns-dsi: Various improvements to mode setting
- Support Solomon SSD2825 plus DT bindings
- Support Waveshare DSI2DPI plus DT bindings
- Support Content Protection property
- display-connector: Improve DP display detection
- Add support for Radxa Ra620 plus DT bindings
- adv7511: Provide SPD and HDMI infoframes
- it6505: Replace crypto_shash with sha()
- synopsys: Add support for DW DPTX Controller plus DT bindings
- adv7511: Write full Audio infoframe
- ite6263: Support vendor-specific infoframes
- simple: Add support for Realtek RTD2171 DP-to-HDMI plus DT bindings
panel:
- panel-edp: Support mt8189 Chromebooks; Support BOE NV140WUM-N64;
Support SHP LQ134Z1; Fixes
- panel-simple: Support Olimex LCD-OLinuXino-5CTS plus DT bindings
- Support Samsung AMS561RA01
- Support Hydis HV101HD1 plus DT bindings
- ilitek-ili9881c: Refactor mode setting; Add support for Bestar
BSD1218-A101KL68 LCD plus DT bindings
- lvds: Add support for Ampire AMP19201200B5TZQW-T03 to DT bindings
- edp: Add support for additonal mt8189 Chromebook panels
- lvds: Add DT bindings for EDT ETML0700Z8DHA
amdgpu:
- add CRIU support for gem objects
- RAS updates
- VCN SRAM load fixes
- EDID read fixes
- eDP ALPM support
- Documentation updates
- Rework PTE flag generation
- DCE6 fixes
- VCN devcoredump cleanup
- MMHUB client id fixes
- VCN 5.0.1 RAS support
- SMU 13.0.x updates
- Expanded PCIe DPC support
- Expanded VCN reset support
- VPE per queue reset support
- give kernel jobs unique id for tracing
- pre-populate exported buffers
- cyan skillfish updates
- make vbios build number available in sysfs
- userq updates
- HDCP updates
- support MMIO remap page as ttm pool
- JPEG parser updates
- DCE6 DC updates
- use devm for i2c buses
- GPUVM locking updates
- Drop non-DC DCE11 code
- improve fallback handling for pixel encoding
amdkfd:
- SVM/page migration fixes
- debugfs fixes
- add CRIO support for gem objects
- SVM updates
radeon:
- use dev_warn_once in CS parsers
xe:
- add madvise interface
- add DRM_IOCTL_XE_VM_QUERY_MEMORY_RANGE_ATTRS to query VMA count
and memory attributes
- drop L# bank mask reporting from media GT3 on Xe3+.
- add SLPC power_profile sysfs interface
- add configs attribs to add post/mid context-switch commands
- handle firmware reported hardware errors notifying userspace with
device wedged uevent
- use same dir structure across sysfs/debugfs
- cleanup and future proof vram region init
- add G-states and PCI link states to debugfs
- Add SRIOV support for CCS surfaces on Xe2+
- Enable SRIOV PF mode by default on supported platforms
- move flush to common code
- extended core workarounds for Xe2/3
- use DRM scheduler for delayed GT TLB invalidations
- configs improvements and allow VF device enablement
- prep work to expose mmio regions to userspace
- VF migration support added
- prepare GPU SVM for THP migration
- start fixing XE_PAGE_SIZE vs PAGE_SIZE
- add PSMI support for hw validation
- resize VF bars to max possible size according to number of VFs
- Ensure GT is in C0 during resume
- pre-populate exported buffers
- replace xe_hmm with gpusvm
- add more SVM GT stats to debugfs
- improve fake pci and WA kunnit handle for new platform testing
- Test GuC to GuC comms to add debugging
- use attribute groups to simplify sysfs registration
- add Late Binding firmware code to interact with MEI
i915:
- apply multiple JSL/EHL/Gen7/Gen6 workarounds properly
- protect against overflow in active_engine()
- Use try_cmpxchg64() in __active_lookup()
- include GuC registers in error state
- get rid of dev->struct_mutex
- iopoll: generalize read_poll_timout
- lots more display refactoring
- Reject HBR3 in any eDP Panel
- Prune modes for YUV420
- Display Wa fix, additions, and updates
- DP: Fix 2.7 Gbps link training on g4x
- DP: Adjust the idle pattern handling
- DP: Shuffle the link training code a bit
- Don't set/read the DSI C clock divider on GLK
- Enable_psr kernel parameter changes
- Type-C enabled/disconnected dp-alt sink
- Wildcat Lake enabling
- DP HDR updates
- DRAM detection
- wait PSR idle on dsb commit
- Remove FBC modulo 4 restriction for ADL-P+
- panic: refactor framebuffer allocation
habanalabs:
- debug/visibility improvements
- vmalloc-backed coherent mmap support
- HLDIO infrastructure
nova-core:
- various register!() macro improvements
- minor vbios/firmware fixes/refactoring
- advance firmware boot stages; process Booter and patch signatures
- process GSP and GSP bootloader
- Add r570.144 firmware bindings and update to it
- Move GSP boot code to own module
- Use new pin-init features to store driver's private data in a
single allocation
- Update ARef import from sync::aref
nova-drm:
- Update ARef import from sync::aref
tyr:
- initial driver skeleton for a rust driver for ARM Mali GPUs
- capable of powering up, query metadata and provide it to userspace.
msm:
- GPU and Core:
- in DT bindings describe clocks per GPU type
- GMU bandwidth voting for x1-85
- a623/a663 speedbins
- cleanup some remaining no-iommu leftovers after VM_BIND conversion
- fix GEM obj 32b size truncation
- add missing VM_BIND param validation
- IFPC for x1-85 and a750
- register xml and gen_header.py sync from mesa
- Display:
- add missing bindings for display on SC8180X
- added DisplayPort MST bindings
- conversion from round_rate() to determine_rate()
amdxdna:
- add IOCTL_AMDXDNA_GET_ARRAY
- support user space allocated buffers
- streamline PM interfaces
- Refactoring wrt. hardware contexts
- improve error reporting
nouveau:
- use GSP firmware by default
- improve error reporting
- Pre-populate exported buffers
ast:
- Clean up detection of DRAM config
exynos:
- add DSIM bridge driver support for Exynos7870
- Document Exynos7870 DSIM compatible in dt-binding
panthor:
- Print task/pid on errors
- Add support for Mali G710, G510, G310, Gx15, Gx20, Gx25
- Improve cache flushing
- Fail VM bind if BO has offset
renesas:
- convert to RUNTIME_PM_OPS
rcar-du:
- Make number of lanes configurable
- Use RUNTIME_PM_OPS
- Add support for DSI commands
rocket:
- Add driver for Rockchip NPU plus DT bindings
- Use kfree() and sizeof() correctly
- Test DMA status
rockchip:
- dsi2: Add support for RK3576 plus DT bindings
- Add support for RK3588 DPTX output
tidss:
- Use crtc_ fields for programming display mode
- Remove other drivers from aperture
pixpaper:
- Add support for Mayqueen Pixpaper plus DT bindings
v3d:
- Support querying nubmer of GPU resets for KHR_robustness
stm:
- Clean up logging
- ltdc: Add support support for STM32MP257F-EV1 plus DT bindings
sitronix:
- st7571-i2c: Add support for inverted displays and 2-bit grayscale
tidss:
- Convert to kernel's FIELD_ macros
vesadrm:
- Support 8-bit palette mode
imagination:
- Improve power management
- Add support for TH1520 GPU
- Support Risc-V architectures
v3d:
- Improve job management and locking
vkms:
- Support variants of ARGB8888, ARGB16161616, RGB565, RGB888 and P01x
- Spport YUV with 16-bit components"
* tag 'drm-next-2025-10-01' of https://gitlab.freedesktop.org/drm/kernel: (1455 commits)
drm/amd: Add name to modes from amdgpu_connector_add_common_modes()
drm/amd: Drop some common modes from amdgpu_connector_add_common_modes()
drm/amdgpu: update MODULE_PARM_DESC for freesync_video
drm/amd: Use dynamic array size declaration for amdgpu_connector_add_common_modes()
drm/amd/display: Share dce100_validate_global with DCE6-8
drm/amd/display: Share dce100_validate_bandwidth with DCE6-8
drm/amdgpu: Fix fence signaling race condition in userqueue
amd/amdkfd: enhance kfd process check in switch partition
amd/amdkfd: resolve a race in amdgpu_amdkfd_device_fini_sw
drm/amd/display: Reject modes with too high pixel clock on DCE6-10
drm/amd: Drop unnecessary check in amdgpu_connector_add_common_modes()
drm/amd/display: Only enable common modes for eDP and LVDS
drm/amdgpu: remove the redeclaration of variable i
drm/amdgpu/userq: assign an error code for invalid userq va
drm/amdgpu: revert "rework reserved VMID handling" v2
drm/amdgpu: remove leftover from enforcing isolation by VMID
drm/amdgpu: Add fallback to pipe reset if KCQ ring reset fails
accel/habanalabs: add Infineon version check
accel/habanalabs/gaudi2: read preboot status after recovering from dirty state
accel/habanalabs: add HL_GET_P_STATE passthrough type
...
|
||
|
Linus Torvalds
|
e1b1d03cee |
Merge tag 'for-6.18/block-20250929' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block updates from Jens Axboe:
- NVMe pull request via Keith:
- FC target fixes (Daniel)
- Authentication fixes and updates (Martin, Chris)
- Admin controller handling (Kamaljit)
- Target lockdep assertions (Max)
- Keep-alive updates for discovery (Alastair)
- Suspend quirk (Georg)
- MD pull request via Yu:
- Add support for a lockless bitmap.
A key feature for the new bitmap are that the IO fastpath is
lockless. If a user issues lots of write IO to the same bitmap
bit in a short time, only the first write has additional overhead
to update bitmap bit, no additional overhead for the following
writes.
By supporting only resync or recover written data, means in the
case creating new array or replacing with a new disk, there is no
need to do a full disk resync/recovery.
- Switch ->getgeo() and ->bios_param() to using struct gendisk rather
than struct block_device.
- Rust block changes via Andreas. This series adds configuration via
configfs and remote completion to the rnull driver. The series also
includes a set of changes to the rust block device driver API: a few
cleanup patches, and a few features supporting the rnull changes.
The series removes the raw buffer formatting logic from
`kernel::block` and improves the logic available in `kernel::string`
to support the same use as the removed logic.
- floppy arch cleanups
- Reduce the number of dereferencing needed for ublk commands
- Restrict supported sockets for nbd. Mostly done to eliminate a class
of issues perpetually reported by syzbot, by using nonsensical socket
setups.
- A few s390 dasd block fixes
- Fix a few issues around atomic writes
- Improve DMA interation for integrity requests
- Improve how iovecs are treated with regards to O_DIRECT aligment
constraints.
We used to require each segment to adhere to the constraints, now
only the request as a whole needs to.
- Clean up and improve p2p support, enabling use of p2p for metadata
payloads
- Improve locking of request lookup, using SRCU where appropriate
- Use page references properly for brd, avoiding very long RCU sections
- Fix ordering of recursively submitted IOs
- Clean up and improve updating nr_requests for a live device
- Various fixes and cleanups
* tag 'for-6.18/block-20250929' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (164 commits)
s390/dasd: enforce dma_alignment to ensure proper buffer validation
s390/dasd: Return BLK_STS_INVAL for EINVAL from do_dasd_request
ublk: remove redundant zone op check in ublk_setup_iod()
nvme: Use non zero KATO for persistent discovery connections
nvmet: add safety check for subsys lock
nvme-core: use nvme_is_io_ctrl() for I/O controller check
nvme-core: do ioccsz/iorcsz validation only for I/O controllers
nvme-core: add method to check for an I/O controller
blk-cgroup: fix possible deadlock while configuring policy
blk-mq: fix null-ptr-deref in blk_mq_free_tags() from error path
blk-mq: Fix more tag iteration function documentation
selftests: ublk: fix behavior when fio is not installed
ublk: don't access ublk_queue in ublk_unmap_io()
ublk: pass ublk_io to __ublk_complete_rq()
ublk: don't access ublk_queue in ublk_need_complete_req()
ublk: don't access ublk_queue in ublk_check_commit_and_fetch()
ublk: don't pass ublk_queue to ublk_fetch()
ublk: don't access ublk_queue in ublk_config_io_buf()
ublk: don't access ublk_queue in ublk_check_fetch_buf()
ublk: pass q_id and tag to __ublk_check_and_get_req()
...
|
||
|
Linus Torvalds
|
eb3289fc47 |
Merge tag 'driver-core-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"Auxiliary:
- Drop call to dev_pm_domain_detach() in auxiliary_bus_probe()
- Optimize logic of auxiliary_match_id()
Rust:
- Auxiliary:
- Use primitive C types from prelude
- DebugFs:
- Add debugfs support for simple read/write files and custom
callbacks through a File-type-based and directory-scope-based
API
- Sample driver code for the File-type-based API
- Sample module code for the directory-scope-based API
- I/O:
- Add io::poll module and implement Rust specific
read_poll_timeout() helper
- IRQ:
- Implement support for threaded and non-threaded device IRQs
based on (&Device<Bound>, IRQ number) tuples (IrqRequest)
- Provide &Device<Bound> cookie in IRQ handlers
- PCI:
- Support IRQ requests from IRQ vectors for a specific
pci::Device<Bound>
- Implement accessors for subsystem IDs, revision, devid and
resource start
- Provide dedicated pci::Vendor and pci::Class types for vendor
and class ID numbers
- Implement Display to print actual vendor and class names; Debug
to print the raw ID numbers
- Add pci::DeviceId::from_class_and_vendor() helper
- Use primitive C types from prelude
- Various minor inline and (safety) comment improvements
- Platform:
- Support IRQ requests from IRQ vectors for a specific
platform::Device<Bound>
- Nova:
- Use pci::DeviceId::from_class_and_vendor() to avoid probing
non-display/compute PCI functions
- Misc:
- Add helper for cpu_relax()
- Update ARef import from sync::aref
sysfs:
- Remove bin_attrs_new field from struct attribute_group
- Remove read_new() and write_new() from struct bin_attribute
Misc:
- Document potential race condition in get_dev_from_fwnode()
- Constify node_group argument in software node registration
functions
- Fix order of kernel-doc parameters in various functions
- Set power.no_pm flag for faux devices
- Set power.no_callbacks flag along with the power.no_pm flag
- Constify the pmu_bus bus type
- Minor spelling fixes"
* tag 'driver-core-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (43 commits)
rust: pci: display symbolic PCI vendor names
rust: pci: display symbolic PCI class names
rust: pci: fix incorrect platform reference in PCI driver probe doc comment
rust: pci: fix incorrect platform reference in PCI driver unbind doc comment
perf: make pmu_bus const
samples: rust: Add scoped debugfs sample driver
rust: debugfs: Add support for scoped directories
samples: rust: Add debugfs sample driver
rust: debugfs: Add support for callback-based files
rust: debugfs: Add support for writable files
rust: debugfs: Add support for read-only files
rust: debugfs: Add initial support for directories
driver core: auxiliary bus: Optimize logic of auxiliary_match_id()
driver core: auxiliary bus: Drop dev_pm_domain_detach() call
driver core: Fix order of the kernel-doc parameters
driver core: get_dev_from_fwnode(): document potential race
drivers: base: fix "publically"->"publicly"
driver core/PM: Set power.no_callbacks along with power.no_pm
driver core: faux: Set power.no_pm for faux devices
rust: pci: inline several tiny functions
...
|
||
|
Linus Torvalds
|
f4e0ff7e45 |
Merge tag 'rust-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Derive 'Zeroable' for all structs and unions generated by 'bindgen'
where possible and corresponding cleanups. To do so, add the
'pin-init' crate as a dependency to 'bindings' and 'uapi'.
It also includes its first use in the 'cpufreq' module, with more
to come in the next cycle.
- Add warning to the 'rustdoc' target to detect broken 'srctree/'
links and fix existing cases.
- Remove support for unused (since v6.16) host '#[test]'s,
simplifying the 'rusttest' target. Tests should generally run
within KUnit.
'kernel' crate:
- Add 'ptr' module with a new 'Alignment' type, which is always a
power of two and is used to validate that a given value is a valid
alignment and to perform masking and alignment operations:
// Checked at build time.
assert_eq!(Alignment::new::<16>().as_usize(), 16);
// Checked at runtime.
assert_eq!(Alignment::new_checked(15), None);
assert_eq!(Alignment::of::<u8>().log2(), 0);
assert_eq!(0x25u8.align_down(Alignment::new::<0x10>()), 0x20);
assert_eq!(0x5u8.align_up(Alignment::new::<0x10>()), Some(0x10));
assert_eq!(u8::MAX.align_up(Alignment::new::<0x10>()), None);
It also includes its first use in Nova.
- Add 'core::mem::{align,size}_of{,_val}' to the prelude, matching
Rust 1.80.0.
- Keep going with the steps on our migration to the standard library
'core::ffi::CStr' type (use 'kernel::{fmt, prelude::fmt!}' and use
upstream method names).
- 'error' module: improve 'Error::from_errno' and 'to_result'
documentation, including examples/tests.
- 'sync' module: extend 'aref' submodule documentation now that it
exists, and more updates to complete the ongoing move of 'ARef' and
'AlwaysRefCounted' to 'sync::aref'.
- 'list' module: add an example/test for 'ListLinksSelfPtr' usage.
- 'alloc' module:
- Implement 'Box::pin_slice()', which constructs a pinned slice of
elements.
- Provide information about the minimum alignment guarantees of
'Kmalloc', 'Vmalloc' and 'KVmalloc'.
- Take minimum alignment guarantees of allocators for
'ForeignOwnable' into account.
- Remove the 'allocator_test' (including 'Cmalloc').
- Add doctest for 'Vec::as_slice()'.
- Constify various methods.
- 'time' module:
- Add methods on 'HrTimer' that can only be called with exclusive
access to an unarmed timer, or from timer callback context.
- Add arithmetic operations to 'Instant' and 'Delta'.
- Add a few convenience and access methods to 'HrTimer' and
'Instant'.
'macros' crate:
- Reduce collections in 'quote!' macro.
And a few other cleanups and improvements"
* tag 'rust-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (58 commits)
gpu: nova-core: use Alignment for alignment-related operations
rust: add `Alignment` type
rust: macros: reduce collections in `quote!` macro
rust: acpi: use `core::ffi::CStr` method names
rust: of: use `core::ffi::CStr` method names
rust: net: use `core::ffi::CStr` method names
rust: miscdevice: use `core::ffi::CStr` method names
rust: kunit: use `core::ffi::CStr` method names
rust: firmware: use `core::ffi::CStr` method names
rust: drm: use `core::ffi::CStr` method names
rust: cpufreq: use `core::ffi::CStr` method names
rust: configfs: use `core::ffi::CStr` method names
rust: auxiliary: use `core::ffi::CStr` method names
drm/panic: use `core::ffi::CStr` method names
rust: device: use `kernel::{fmt,prelude::fmt!}`
rust: sync: use `kernel::{fmt,prelude::fmt!}`
rust: seq_file: use `kernel::{fmt,prelude::fmt!}`
rust: kunit: use `kernel::{fmt,prelude::fmt!}`
rust: file: use `kernel::{fmt,prelude::fmt!}`
rust: device: use `kernel::{fmt,prelude::fmt!}`
...
|
||
Greg Kroah-Hartman
|
c584a1c7c8 |
USB: disable rust bindings from the build for now
The rust USB bindings as submitted are a good start, but they don't really seem to be correct in a number of minor places, so just disable them from the build entirely at this point in time. When they are ready to be re-enabled, this commit can be reverted. Acked-by: Daniel Almeida <daniel.almeida@collabora.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Daniel Almeida
|
cc80dbb73b |
samples: rust: add a USB driver sample
In light of the newly-added Rust abstractions for USB devices and drivers, add a sample USB rust driver that serves both to showcase what is currently supported, as well as be the only user of the USB abstractions for now. Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com> Link: https://lore.kernel.org/r/20250825-b4-usb-v1-2-7aa024de7ae8@collabora.com [ force USB = y for now - gregkh ] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
SeongJae Park
|
d93871f473 |
samples/damon/mtier: use damon_initialized()
damon_sample_mtier is assuming DAMON is ready to use in module_init time, and uses its own hack to see if it is the time. Use damon_initialized(), which is a way for seeing if DAMON is ready to be used that is more reliable and better to maintain instead of the hack. Link: https://lkml.kernel.org/r/20250916033511.116366-8-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
20c0ed5035 |
samples/damon/prcl: use damon_initialized()
damon_sample_prcl is assuming DAMON is ready to use in module_init time, and uses its own hack to see if it is the time. Use damon_initialized(), which is a way for seeing if DAMON is ready to be used that is more reliable and better to maintain instead of the hack. Link: https://lkml.kernel.org/r/20250916033511.116366-7-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
1f70367f7b |
samples/damon/wsse: use damon_initialized()
damon_sample_wsse is assuming DAMON is ready to use in module_init time, and uses its own hack to see if it is the time. Use damon_initialized(), which is a way for seeing if DAMON is ready to be used that is more reliable and better to maintain instead of the hack. Link: https://lkml.kernel.org/r/20250916033511.116366-6-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
zhang jiao
|
152d42584a |
samples/cgroup: rm unused MEMCG_EVENTS macro
MEMCG_EVENTS is never referenced in the code. Just remove it. Link: https://lkml.kernel.org/r/20250903073100.2477-1-zhangjiao2@cmss.chinamobile.com Signed-off-by: zhang jiao <zhangjiao2@cmss.chinamobile.com> Acked-by: Shakeel Butt <shakeel.butt@linux.dev> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Roman Gushchin <roman.gushchin@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Linus Torvalds
|
8b789f2b76 |
Merge tag 'mm-hotfixes-stable-2025-09-17-21-10' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"15 hotfixes. 11 are cc:stable and the remainder address post-6.16
issues or aren't considered necessary for -stable kernels. 13 of these
fixes are for MM.
The usual shower of singletons, plus
- fixes from Hugh to address various misbehaviors in get_user_pages()
- patches from SeongJae to address a quite severe issue in DAMON
- another series also from SeongJae which completes some fixes for a
DAMON startup issue"
* tag 'mm-hotfixes-stable-2025-09-17-21-10' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
zram: fix slot write race condition
nilfs2: fix CFI failure when accessing /sys/fs/nilfs2/features/*
samples/damon/mtier: avoid starting DAMON before initialization
samples/damon/prcl: avoid starting DAMON before initialization
samples/damon/wsse: avoid starting DAMON before initialization
MAINTAINERS: add Lance Yang as a THP reviewer
MAINTAINERS: add Jann Horn as rmap reviewer
mm/damon/sysfs: use dynamically allocated repeat mode damon_call_control
mm/damon/core: introduce damon_call_control->dealloc_on_cancel
mm: folio_may_be_lru_cached() unless folio_test_large()
mm: revert "mm: vmscan.c: fix OOM on swap stress test"
mm: revert "mm/gup: clear the LRU flag of a page before adding to LRU batch"
mm/gup: local lru_add_drain() to avoid lru_add_drain_all()
mm/gup: check ref_count instead of lru before migration
|
||
Dave Airlie
|
6f17ab9a63 |
Merge tag 'drm-rust-next-2025-09-16' of https://gitlab.freedesktop.org/drm/rust/kernel into drm-next
DRM Rust changes for v6.18
Alloc
- Add BorrowedPage type and AsPageIter trait
- Implement Vmalloc::to_page() and VmallocPageIter
- Implement AsPageIter for VBox and VVec
DMA & Scatterlist
- Add dma::DataDirection and type alias for dma_addr_t
- Abstraction for struct scatterlist and struct sg_table
DRM
- In the DRM GEM module, simplify overall use of generics, add
DriverFile type alias and drop Object::SIZE.
Nova (Core)
- Various register!() macro improvements (paving the way for lifting
it to common driver infrastructure)
- Minor VBios fixes and refactoring
- Minor firmware request refactoring
- Advance firmware boot stages; process Booter and patch its
signature, process GSP and GSP bootloader
- Switch development fimrware version to r570.144
- Add basic firmware bindings for r570.144
- Move GSP boot code to its own module
- Clean up and take advantage of pin-init features to store most of
the driver's private data within a single allocation
- Update ARef import from sync::aref
- Add website to MAINTAINERS entry
Nova (DRM)
- Update ARef import from sync::aref
- Add website to MAINTAINERS entry
Pin-Init
- Merge pin-init PR from Benno
- `#[pin_data]` now generates a `*Projection` struct similar to the
`pin-project` crate.
- Add initializer code blocks to `[try_][pin_]init!` macros: make
initializer macros accept any number of `_: {/* arbitrary code
*/},` & make them run the code at that point.
- Make the `[try_][pin_]init!` macros expose initialized fields via
a `let` binding as `&mut T` or `Pin<&mut T>` for later fields.
Rust
- Various methods for AsBytes and FromBytes traits
Tyr
- Initial Rust driver skeleton for ARM Mali GPUs.
- It can power up the GPU, query for GPU metatdata through MMIO and
provide the metadata to userspace via DRM device IOCTL (struct
drm_panthor_dev_query).
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: "Danilo Krummrich" <dakr@kernel.org>
Link: https://lore.kernel.org/r/DCUC4SY6SRBD.1ZLHAIQZOC6KG@kernel.org
|
||
Tamir Duberstein
|
a3a7d09ab8 |
rust: configfs: use core::ffi::CStr method names
Prepare for `core::ffi::CStr` taking the place of `kernel::str::CStr` by avoid methods that only exist on the latter. Also avoid `Deref<Target=BStr> for CStr` as that impl doesn't exist on `core::ffi::CStr`. Link: https://github.com/Rust-for-Linux/linux/issues/1075 Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Benno Lossin <lossin@kernel.org> Signed-off-by: Tamir Duberstein <tamird@gmail.com> Acked-by: Andreas Hindborg <a.hindborg@kernel.org> Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
|
Greg Kroah-Hartman
|
c319c4ec06 |
Merge 6.17-rc6 into driver-core-next
We need the driver core fixes in here to build on top of. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
SeongJae Park
|
c62cff4048 |
samples/damon/mtier: avoid starting DAMON before initialization
Commit |
||
|
SeongJae Park
|
e6b733ca2f |
samples/damon/prcl: avoid starting DAMON before initialization
Commit |
||
|
SeongJae Park
|
f826edeb88 |
samples/damon/wsse: avoid starting DAMON before initialization
Patch series "samples/damon: fix boot time enable handling fixup merge mistakes". First three patches of the patch series "mm/damon: fix misc bugs in DAMON modules" [1] were trying to fix boot time DAMON sample modules enabling issues. The issues are the modules can crash if those are enabled before DAMON is enabled, like using boot time parameter options. The three patches were fixing the issues by avoiding starting DAMON before the module initialization phase. However, probably by a mistake during a merge, only half of the change is merged, and the part for avoiding the starting of DAMON before the module initialized is missed. So the problem is not solved and thus the modules can still crash if enabled before DAMON is initialized. Fix those by applying the unmerged parts again. Note that the broken commits are merged into 6.17-rc1, but also backported to relevant stable kernels. So this series also needs to be merged into the stable kernels. Hence Cc-ing stable@. This patch (of 3): Commit |
||
Danilo Krummrich
|
3760401981 |
Merge tag 'pin-init-v6.18' of https://github.com/Rust-for-Linux/linux into drm-rust-next
pin-init changes for v6.18
Changed:
- `#[pin_data]` now generates a `*Projection` struct similar to the
`pin-project` crate.
- Add initializer code blocks to `[try_][pin_]init!` macros: make
initializer macros accept any number of `_: {/* arbitrary code */},` &
make them run the code at that point.
- Make the `[try_][pin_]init!` macros expose initialized fields via a
`let` binding as `&mut T` or `Pin<&mut T>` for later fields.
Upstream dev news:
- Released v0.0.10 before the changes included in this tag.
- Inform users of the impending rename from `pinned-init` to `pin-init`
(in the kernel the rename already happened).
- More CI improvements.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
From: Benno Lossin <lossin@kernel.org>
Link: https://lore.kernel.org/r/20250912174148.373530-1-lossin@kernel.org
|
||
Benno Lossin
|
42415d163e |
rust: pin-init: add references to previously initialized fields
After initializing a field in an initializer macro, create a variable holding a reference that points at that field. The type is either `Pin<&mut T>` or `&mut T` depending on the field's structural pinning kind. [ Applied fixes to devres and rust_driver_pci sample - Benno] Reviewed-by: Danilo Krummrich <dakr@kernel.org> Signed-off-by: Benno Lossin <lossin@kernel.org> |
||
Matthew Maurer
|
d4a5d397c7 |
samples: rust: Add scoped debugfs sample driver
Adds a new sample driver `rust_scoped_debugfs` that demonstrates the use of the scoped debugfs APIs. The driver creates a `control` directory with two write-only files, `create` and `remove`. Writing a name and a series of numbers to `create` will create a new subdirectory under a `dynamic` directory. This new subdirectory will contain files that expose the numbers as atomic values. Writing a name to `remove` will remove the corresponding subdirectory from the `dynamic` directory. This sample serves as an example of how to use the `debugfs::Scope` and `debugfs::ScopedDir` APIs to create and manage debugfs entries that are tied to the lifetime of a data structure. Signed-off-by: Matthew Maurer <mmaurer@google.com> Tested-by: Dirk Behme <dirk.behme@de.bosch.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20250904-debugfs-rust-v11-7-7d12a165685a@google.com [ Rename "scoped_debugfs" -> "debugfs_scoped", fix up Result<(), Error> -> Result. - Danilo ] Signed-off-by: Danilo Krummrich <dakr@kernel.org> |
||
|
Matthew Maurer
|
6f227d2137 |
samples: rust: Add debugfs sample driver
Adds a new sample driver that demonstrates the debugfs APIs. The driver creates a directory in debugfs and populates it with a few files: - A read-only file that displays a fwnode property. - A read-write file that exposes an atomic counter. - A read-write file that exposes a custom struct. This sample serves as a basic example of how to use the `debugfs::Dir` and `debugfs::File` APIs to create and manage debugfs entries. Signed-off-by: Matthew Maurer <mmaurer@google.com> Tested-by: Dirk Behme <dirk.behme@de.bosch.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20250904-debugfs-rust-v11-5-7d12a165685a@google.com [ Change ACPI ID "LNUXDEBF" to "LNUXBEEF". - Danilo ] Signed-off-by: Danilo Krummrich <dakr@kernel.org> |
||
|
Greg Kroah-Hartman
|
1da0ca4bdf |
Merge patch series "Rust support for struct iov_iter"
Alice Ryhl <aliceryhl@google.com> says: This series adds support for the `struct iov_iter` type. This type represents an IO buffer for reading or writing, and can be configured for either direction of communication. In Rust, we define separate types for reading and writing. This will ensure that you cannot mix them up and e.g. call copy_from_iter in a read_iter syscall. To use the new abstractions, miscdevices are given new methods read_iter and write_iter that can be used to implement the read/write syscalls on a miscdevice. The miscdevice sample is updated to provide read/write operations. Intended for Greg's miscdevice tree. Link: https://lore.kernel.org/r/20250822-iov-iter-v5-0-6ce4819c2977@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |