Pull networking updates from Paolo Abeni:
"Core & protocols:
- Improve drop account scalability on NUMA hosts for RAW and UDP
sockets and the backlog, almost doubling the Pps capacity under DoS
- Optimize the UDP RX performance under stress, reducing contention,
revisiting the binary layout of the involved data structs and
implementing NUMA-aware locking. This improves UDP RX performance
by an additional 50%, even more under extreme conditions
- Add support for PSP encryption of TCP connections; this mechanism
has some similarities with IPsec and TLS, but offers superior HW
offloads capabilities
- Ongoing work to support Accurate ECN for TCP. AccECN allows more
than one congestion notification signal per RTT and is a building
block for Low Latency, Low Loss, and Scalable Throughput (L4S)
- Reorganize the TCP socket binary layout for data locality, reducing
the number of touched cachelines in the fastpath
- Refactor skb deferral free to better scale on large multi-NUMA
hosts, this improves TCP and UDP RX performances significantly on
such HW
- Increase the default socket memory buffer limits from 256K to 4M to
better fit modern link speeds
- Improve handling of setups with a large number of nexthop, making
dump operating scaling linearly and avoiding unneeded
synchronize_rcu() on delete
- Improve bridge handling of VLAN FDB, storing a single entry per
bridge instead of one entry per port; this makes the dump order of
magnitude faster on large switches
- Restore IP ID correctly for encapsulated packets at GSO
segmentation time, allowing GRO to merge packets in more scenarios
- Improve netfilter matching performance on large sets
- Improve MPTCP receive path performance by leveraging recently
introduced core infrastructure (skb deferral free) and adopting
recent TCP autotuning changes
- Allow bridges to redirect to a backup port when the bridge port is
administratively down
- Introduce MPTCP 'laminar' endpoint that con be used only once per
connection and simplify common MPTCP setups
- Add RCU safety to dst->dev, closing a lot of possible races
- A significant crypto library API for SCTP, MPTCP and IPv6 SR,
reducing code duplication
- Supports pulling data from an skb frag into the linear area of an
XDP buffer
Things we sprinkled into general kernel code:
- Generate netlink documentation from YAML using an integrated YAML
parser
Driver API:
- Support using IPv6 Flow Label in Rx hash computation and RSS queue
selection
- Introduce API for fetching the DMA device for a given queue,
allowing TCP zerocopy RX on more H/W setups
- Make XDP helpers compatible with unreadable memory, allowing more
easily building DevMem-enabled drivers with a unified XDP/skbs
datapath
- Add a new dedicated ethtool callback enabling drivers to provide
the number of RX rings directly, improving efficiency and clarity
in RX ring queries and RSS configuration
- Introduce a burst period for the health reporter, allowing better
handling of multiple errors due to the same root cause
- Support for DPLL phase offset exponential moving average,
controlling the average smoothing factor
Device drivers:
- Add a new Huawei driver for 3rd gen NIC (hinic3)
- Add a new SpacemiT driver for K1 ethernet MAC
- Add a generic abstraction for shared memory communication
devices (dibps)
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- Use multiple per-queue doorbell, to avoid MMIO contention
issues
- support adjacent functions, allowing them to delegate their
SR-IOV VFs to sibling PFs
- support RSS for IPSec offload
- support exposing raw cycle counters in PTP and mlx5
- support for disabling host PFs.
- Intel (100G, ice, idpf):
- ice: support for SRIOV VFs over an Active-Active link
aggregate
- ice: support for firmware logging via debugfs
- ice: support for Earliest TxTime First (ETF) hardware offload
- idpf: support basic XDP functionalities and XSk
- Broadcom (bnxt):
- support Hyper-V VF ID
- dynamic SRIOV resource allocations for RoCE
- Meta (fbnic):
- support queue API, zero-copy Rx and Tx
- support basic XDP functionalities
- devlink health support for FW crashes and OTP mem corruptions
- expand hardware stats coverage to FEC, PHY, and Pause
- Wangxun:
- support ethtool coalesce options
- support for multiple RSS contexts
- Ethernet virtual:
- Macsec:
- replace custom netlink attribute checks with policy-level
checks
- Bonding:
- support aggregator selection based on port priority
- Microsoft vNIC:
- use page pool fragments for RX buffers instead of full pages
to improve memory efficiency
- Ethernet NICs consumer, and embedded:
- Qualcomm: support Ethernet function for IPQ9574 SoC
- Airoha: implement wlan offloading via NPU
- Freescale
- enetc: add NETC timer PTP driver and add PTP support
- fec: enable the Jumbo frame support for i.MX8QM
- Renesas (R-Car S4):
- support HW offloading for layer 2 switching
- support for RZ/{T2H, N2H} SoCs
- Cadence (macb): support TAPRIO traffic scheduling
- TI:
- support for Gigabit ICSS ethernet SoC (icssm-prueth)
- Synopsys (stmmac): a lot of cleanups
- Ethernet PHYs:
- Support 10g-qxgmi phy-mode for AQR412C, Felix DSA and Lynx PCS
driver
- Support bcm63268 GPHY power control
- Support for Micrel lan8842 PHY and PTP
- Support for Aquantia AQR412 and AQR115
- CAN:
- a large CAN-XL preparation work
- reorganize raw_sock and uniqframe struct to minimize memory
usage
- rcar_canfd: update the CAN-FD handling
- WiFi:
- extended Neighbor Awareness Networking (NAN) support
- S1G channel representation cleanup
- improve S1G support
- WiFi drivers:
- Intel (iwlwifi):
- major refactor and cleanup
- Broadcom (brcm80211):
- support for AP isolation
- RealTek (rtw88/89) rtw88/89:
- preparation work for RTL8922DE support
- MediaTek (mt76):
- HW restart improvements
- MLO support
- Qualcomm/Atheros (ath10k):
- GTK rekey fixes
- Bluetooth drivers:
- btusb: support for several new IDs for MT7925
- btintel: support for BlazarIW core
- btintel_pcie: support for _suspend() / _resume()
- btintel_pcie: support for Scorpious, Panther Lake-H484 IDs"
* tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1536 commits)
net: stmmac: Add support for Allwinner A523 GMAC200
dt-bindings: net: sun8i-emac: Add A523 GMAC200 compatible
Revert "Documentation: net: add flow control guide and document ethtool API"
octeontx2-pf: fix bitmap leak
octeontx2-vf: fix bitmap leak
net/mlx5e: Use extack in set rxfh callback
net/mlx5e: Introduce mlx5e_rss_params for RSS configuration
net/mlx5e: Introduce mlx5e_rss_init_params
net/mlx5e: Remove unused mdev param from RSS indir init
net/mlx5: Improve QoS error messages with actual depth values
net/mlx5e: Prevent entering switchdev mode with inconsistent netns
net/mlx5: HWS, Generalize complex matchers
net/mlx5: Improve write-combining test reliability for ARM64 Grace CPUs
selftests/net: add tcp_port_share to .gitignore
Revert "net/mlx5e: Update and set Xon/Xoff upon MTU set"
net: add NUMA awareness to skb_attempt_defer_free()
net: use llist for sd->defer_list
net: make softnet_data.defer_count an atomic
selftests: drv-net: psp: add tests for destroying devices
selftests: drv-net: psp: add test for auto-adjusting TCP MSS
...
Pull VDSO updates from Thomas Gleixner:
- Further consolidation of the VDSO infrastructure and the common data
store
- Simplification of the related Kconfig logic
- Improve the VDSO selftest suite
* tag 'timers-vdso-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests: vDSO: Drop vdso_test_clock_getres
selftests: vDSO: vdso_test_abi: Add tests for clock_gettime64()
selftests: vDSO: vdso_test_abi: Test CPUTIME clocks
selftests: vDSO: vdso_test_abi: Use explicit indices for name array
selftests: vDSO: vdso_test_abi: Drop clock availability tests
selftests: vDSO: vdso_test_abi: Use ksft_finished()
selftests: vDSO: vdso_test_abi: Correctly skip whole test with missing vDSO
selftests: vDSO: Fix -Wunitialized in powerpc VDSO_CALL() wrapper
vdso: Add struct __kernel_old_timeval forward declaration to gettime.h
vdso: Gate VDSO_GETRANDOM behind HAVE_GENERIC_VDSO
vdso: Drop Kconfig GENERIC_VDSO_TIME_NS
vdso: Drop Kconfig GENERIC_VDSO_DATA_STORE
vdso: Drop kconfig GENERIC_COMPAT_VDSO
vdso: Drop kconfig GENERIC_VDSO_32
riscv: vdso: Untangle Kconfig logic
time: Build generic update_vsyscall() only with generic time vDSO
vdso/gettimeofday: Remove !CONFIG_TIME_NS stubs
vdso: Move ENABLE_COMPAT_VDSO from core to arm64
ARM: VDSO: Remove cntvct_ok global variable
vdso/datastore: Gate time data behind CONFIG_GENERIC_GETTIMEOFDAY
Pull clocksource updates from Thomas Gleixner:
- Further preparations for modular clocksource/event drivers
- The usual device tree updates to support new chip variants and the
related changes to thise drivers
- Avoid a 64-bit division in the TEGRA186 driver, which caused a build
fail on 32-bit machines.
- Small fixes, improvements and cleanups all over the place
* tag 'timers-clocksource-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
dt-bindings: timer: exynos4210-mct: Add compatible for ARTPEC-9 SoC
clocksource/drivers/sh_cmt: Split start/stop of clock source and events
clocksource/drivers/clps711x: Fix resource leaks in error paths
clocksource/drivers/arm_global_timer: Add auto-detection for initial prescaler values
clocksource/drivers/ingenic-sysost: Convert from round_rate() to determine_rate()
clocksource/drivers/timer-tegra186: Don't print superfluous errors
clocksource/drivers/timer-rtl-otto: Simplify documentation
clocksource/drivers/timer-rtl-otto: Do not interfere with interrupts
clocksource/drivers/timer-rtl-otto: Drop set_counter function
clocksource/drivers/timer-rtl-otto: Work around dying timers
clocksource/drivers/timer-ti-dm : Capture functionality for OMAP DM timer
clocksource/drivers/arm_arch_timer_mmio: Add MMIO clocksource
clocksource/drivers/arm_arch_timer_mmio: Switch over to standalone driver
clocksource/drivers/arm_arch_timer: Add standalone MMIO driver
ACPI: GTDT: Generate platform devices for MMIO timers
clocksource/drivers/nxp-pit: Add NXP Automotive s32g2 / s32g3 support
dt: bindings: fsl,vf610-pit: Add compatible for s32g2 and s32g3
clocksource/drivers/vf-pit: Rename the VF PIT to NXP PIT
clocksource/drivers/vf-pit: Unify the function name for irq ack
clocksource/drivers/vf-pit: Consolidate calls to pit_*_disable/enable
...
Pull timer core updates from Thomas Gleixner:
- Address the inconsistent shutdown sequence of per CPU clockevents on
CPU hotplug, which only removed it from the core but failed to invoke
the actual device driver shutdown callback. This kept the timer
active, which prevented power savings and caused pointless noise in
virtualization.
- Encapsulate the open coded access to the hrtimer clock base, which is
a private implementation detail, so that the implementation can be
changed without breaking a lot of usage sites.
- Enhance the debug output of the clocksource watchdog to provide
better information for analysis.
- The usual set of cleanups and enhancements all over the place
* tag 'timers-core-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Fix spelling mistakes in comments
clocksource: Print durations for sync check unconditionally
LoongArch: Remove clockevents shutdown call on offlining
tick: Do not set device to detached state in tick_shutdown()
hrtimer: Reorder branches in hrtimer_clockid_to_base()
hrtimer: Remove hrtimer_clock_base:: Get_time
hrtimer: Use hrtimer_cb_get_time() helper
media: pwm-ir-tx: Avoid direct access to hrtimer clockbase
ALSA: hrtimer: Avoid direct access to hrtimer clockbase
lib: test_objpool: Avoid direct access to hrtimer clockbase
sched/core: Avoid direct access to hrtimer clockbase
timers/itimer: Avoid direct access to hrtimer clockbase
posix-timers: Avoid direct access to hrtimer clockbase
jiffies: Remove obsolete SHIFTED_HZ comment
Pull namespace updates from Christian Brauner:
"This contains a larger set of changes around the generic namespace
infrastructure of the kernel.
Each specific namespace type (net, cgroup, mnt, ...) embedds a struct
ns_common which carries the reference count of the namespace and so
on.
We open-coded and cargo-culted so many quirks for each namespace type
that it just wasn't scalable anymore. So given there's a bunch of new
changes coming in that area I've started cleaning all of this up.
The core change is to make it possible to correctly initialize every
namespace uniformly and derive the correct initialization settings
from the type of the namespace such as namespace operations, namespace
type and so on. This leaves the new ns_common_init() function with a
single parameter which is the specific namespace type which derives
the correct parameters statically. This also means the compiler will
yell as soon as someone does something remotely fishy.
The ns_common_init() addition also allows us to remove ns_alloc_inum()
and drops any special-casing of the initial network namespace in the
network namespace initialization code that Linus complained about.
Another part is reworking the reference counting. The reference
counting was open-coded and copy-pasted for each namespace type even
though they all followed the same rules. This also removes all open
accesses to the reference count and makes it private and only uses a
very small set of dedicated helpers to manipulate them just like we do
for e.g., files.
In addition this generalizes the mount namespace iteration
infrastructure introduced a few cycles ago. As reminder, the vfs makes
it possible to iterate sequentially and bidirectionally through all
mount namespaces on the system or all mount namespaces that the caller
holds privilege over. This allow userspace to iterate over all mounts
in all mount namespaces using the listmount() and statmount() system
call.
Each mount namespace has a unique identifier for the lifetime of the
systems that is exposed to userspace. The network namespace also has a
unique identifier working exactly the same way. This extends the
concept to all other namespace types.
The new nstree type makes it possible to lookup namespaces purely by
their identifier and to walk the namespace list sequentially and
bidirectionally for all namespace types, allowing userspace to iterate
through all namespaces. Looking up namespaces in the namespace tree
works completely locklessly.
This also means we can move the mount namespace onto the generic
infrastructure and remove a bunch of code and members from struct
mnt_namespace itself.
There's a bunch of stuff coming on top of this in the future but for
now this uses the generic namespace tree to extend a concept
introduced first for pidfs a few cycles ago. For a while now we have
supported pidfs file handles for pidfds. This has proven to be very
useful.
This extends the concept to cover namespaces as well. It is possible
to encode and decode namespace file handles using the common
name_to_handle_at() and open_by_handle_at() apis.
As with pidfs file handles, namespace file handles are exhaustive,
meaning it is not required to actually hold a reference to nsfs in
able to decode aka open_by_handle_at() a namespace file handle.
Instead the FD_NSFS_ROOT constant can be passed which will let the
kernel grab a reference to the root of nsfs internally and thus decode
the file handle.
Namespaces file descriptors can already be derived from pidfds which
means they aren't subject to overmount protection bugs. IOW, it's
irrelevant if the caller would not have access to an appropriate
/proc/<pid>/ns/ directory as they could always just derive the
namespace based on a pidfd already.
It has the same advantage as pidfds. It's possible to reliably and for
the lifetime of the system refer to a namespace without pinning any
resources and to compare them trivially.
Permission checking is kept simple. If the caller is located in the
namespace the file handle refers to they are able to open it otherwise
they must hold privilege over the owning namespace of the relevant
namespace.
The namespace file handle layout is exposed as uapi and has a stable
and extensible format. For now it simply contains the namespace
identifier, the namespace type, and the inode number. The stable
format means that userspace may construct its own namespace file
handles without going through name_to_handle_at() as they are already
allowed for pidfs and cgroup file handles"
* tag 'namespace-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (65 commits)
ns: drop assert
ns: move ns type into struct ns_common
nstree: make struct ns_tree private
ns: add ns_debug()
ns: simplify ns_common_init() further
cgroup: add missing ns_common include
ns: use inode initializer for initial namespaces
selftests/namespaces: verify initial namespace inode numbers
ns: rename to __ns_ref
nsfs: port to ns_ref_*() helpers
net: port to ns_ref_*() helpers
uts: port to ns_ref_*() helpers
ipv4: use check_net()
net: use check_net()
net-sysfs: use check_net()
user: port to ns_ref_*() helpers
time: port to ns_ref_*() helpers
pid: port to ns_ref_*() helpers
ipc: port to ns_ref_*() helpers
cgroup: port to ns_ref_*() helpers
...
Pull copy_process updates from Christian Brauner:
"This contains the changes to enable support for clone3() on nios2
which apparently is still a thing.
The more exciting part of this is that it cleans up the inconsistency
in how the 64-bit flag argument is passed from copy_process() into the
various other copy_*() helpers"
[ Fixed up rv ltl_monitor 32-bit support as per Sasha Levin in the merge ]
* tag 'kernel-6.18-rc1.clone3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
nios2: implement architecture-specific portion of sys_clone3
arch: copy_thread: pass clone_flags as u64
copy_process: pass clone_flags as u64 across calltree
copy_sighand: Handle architectures where sizeof(unsigned long) < sizeof(u64)
It's misplaced in struct proc_ns_operations and ns->ops might be NULL if
the namespace is compiled out but we still want to know the type of the
namespace for the initial namespace struct.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Simply derive the ns operations from the namespace type.
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Correct several typos found in comments across various files in the
kernel/time directory.
No functional changes are introduced by these corrections.
Signed-off-by: Haofeng Li <lihaofeng@kylinos.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
And drop ns_free_inum(). Anything common that can be wasted centrally
should be wasted in the new common helper.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
There's a lot of information that namespace implementers don't need to
know about at all. Encapsulate this all in the initialization helper.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Every namespace type has a container_of(ns, <ns_type>, ns) static inline
function that is currently not exposed in the header. So we have a bunch
of places that open-code it via container_of(). Move it to the headers
so we can use it directly.
Reviewed-by: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Support the generic ns lookup infrastructure to support file handles for
namespaces.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Cross-merge networking fixes after downstream PR (net-6.17-rc7).
No conflicts.
Adjacent changes:
drivers/net/ethernet/mellanox/mlx5/core/en/fs.h
9536fbe10c ("net/mlx5e: Add PSP steering in local NIC RX")
7601a0a462 ("net/mlx5e: Add a miss level for ipsec crypto offload")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR (net-6.17-rc6).
Conflicts:
net/netfilter/nft_set_pipapo.c
net/netfilter/nft_set_pipapo_avx2.c
c4eaca2e10 ("netfilter: nft_set_pipapo: don't check genbit from packetpath lookups")
84c1da7b38 ("netfilter: nft_set_pipapo: use avx2 algorithm for insertions too")
Only trivial adjacent changes (in a doc and a Makefile).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A typical set of messages that gets printed as a result of the clocksource
watchdog finding the TSC unstable usually does not contain messages
indicating CPUs being ahead of or behind the CPU from which the check is
carried out. That fact suggests that the TSC does not experience time skew
between CPUs (if the clocksource.verify_n_cpus parameter is set to a
negative value) but quantitative information is missing.
The cs_nsec_max value printed by the "CPU %d check durations" message
actually provides a worst case estimate of the time skew. If all CPUs have
been checked, the cs_nsec_max value multiplied by 2 is the maximum
possible time skew between the TSCs of any two CPUs on the system. The
worst case estimate is derived from two boundary cases:
1. No time is consumed to execute instructions between csnow_begin and
csnow_mid while all the cs_nsec_max time is consumed by the code between
csnow_mid and csnow_end. In this case, the maximum undetectable time skew
of a CPU being ahead would be cs_nsec_max.
2. All the cs_nsec_max time is consumed to execute instructions between
csnow_begin and csnow_mid while no time is consumed by the code between
csnow_mid and csnow_end. In this case, the maximum undetectable time skew
of a CPU being behind would be cs_nsec_max.
The worst case estimate assumes a system experiencing a corner case
consisting of the two boundary cases.
Always print the "CPU %d check durations" message so that the maximum
possible time skew measured by the TSC sync check can be compared to the
time skew measured by the clocksource watchdog.
Signed-off-by: Jiri Wiesner <jwiesner@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/all/aIuXXfdITXdI0lLp@incl
When testing softirq based hrtimers on an ARM32 board, with high resolution
mode and NOHZ inactive, softirq based hrtimers fail to expire after being
moved away from an offline CPU:
CPU0 CPU1
hrtimer_start(..., HRTIMER_MODE_SOFT);
cpu_down(CPU1) ...
hrtimers_cpu_dying()
// Migrate timers to CPU0
smp_call_function_single(CPU0, returgger_next_event);
retrigger_next_event()
if (!highres && !nohz)
return;
As retrigger_next_event() is a NOOP when both high resolution timers and
NOHZ are inactive CPU0's hrtimer_cpu_base::softirq_expires_next is not
updated and the migrated softirq timers never expire unless there is a
softirq based hrtimer queued on CPU0 later.
Fix this by removing the hrtimer_hres_active() and tick_nohz_active() check
in retrigger_next_event(), which enforces a full update of the CPU base.
As this is not a fast path the extra cost does not matter.
[ tglx: Massaged change log ]
Fixes: 5c0930ccaa ("hrtimers: Push pending hrtimers away from outgoing CPU earlier")
Co-developed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250805081025.54235-1-wangxiongfeng2@huawei.com
tick_shutdown() sets the state of the clockevent device to detached
first and the invokes clockevents_exchange_device(), which in turn
invokes clockevents_switch_state().
But clockevents_switch_state() returns without invoking the device shutdown
callback as the device is already in detached state. As a consequence the
timer device is not shutdown when a CPU goes offline.
tick_shutdown() does this because it was originally invoked on a online CPU
and not on the outgoing CPU. It therefore could not access the clockevent
device of the already offlined CPU and just set the state.
Since commit 3b1596a21f tick_shutdown() is called on the outgoing CPU, so
the hardware device can be accessed.
Remove the state set before calling clockevents_exchange_device(), so that
the subsequent clockevents_switch_state() handles the state transition and
invokes the shutdown callback of the clockevent device.
[ tglx: Massaged change log ]
Fixes: 3b1596a21f ("clockevents: Shutdown and unregister current clockevents at CPUHP_AP_TICK_DYING")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/all/20250906064952.3749122-2-maobibo@loongson.cn
