mirror of
https://github.com/armbian/linux.git
synced 2026-01-06 10:13:00 -08:00
99e09eac25
This board has a s5h1409 demod, plus a xc30x8 tuner (probably, xc3018). This patch adds proper support for radio, video, s-video, composite and ATSC. However, support for radio and video depends on having s5h1409 i2c gate open, otherwise, xc30x8 chip won't be visible. For a better support, some rework is needed on cx88 driver, to allow adding xc30x8 to i2c bus without sending i2c 0 byte reading to 0xc2 address. Thanks to Vanessa Ezekowitz <vanessaezekowitz@gmail.com> for helping to figure out the proper parameters for s5h1409 and the GPIO pins used by each configuration. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
What is it?
===========
This is a v4l2/oss device driver for saa7130/33/34/35 based capture / TV
boards. See http://www.semiconductors.philips.com/pip/saa7134hl for a
description.
Status
======
Almost everything is working. video, sound, tuner, radio, mpeg ts, ...
As with bttv, card-specific tweaks are needed. Check CARDLIST for a
list of known TV cards and saa7134-cards.c for the drivers card
configuration info.
Build
=====
Pick up videodev + v4l2 patches from http://bytesex.org/patches/.
Configure, build, install + boot the new kernel. You'll need at least
these config options:
CONFIG_I2C=m
CONFIG_VIDEO_DEV=m
Type "make" to build the driver now. "make install" installs the
driver. "modprobe saa7134" should load it. Depending on the card you
might have to pass card=<nr> as insmod option, check CARDLIST for
valid choices.
Changes / Fixes
===============
Please mail me unified diffs ("diff -u") with your changes, and don't
forget to tell me what it changes / which problem it fixes / whatever
it is good for ...
Known Problems
==============
* The tuner for the flyvideos isn't detected automatically and the
default might not work for you depending on which version you have.
There is a tuner= insmod option to override the driver's default.
Card Variations:
================
Cards can use either of these two crystals (xtal):
- 32.11 MHz -> .audio_clock=0x187de7
- 24.576MHz -> .audio_clock=0x200000
(xtal * .audio_clock = 51539600)
Some details about 30/34/35:
- saa7130 - low-price chip, doesn't have mute, that is why all those
cards should have .mute field defined in their tuner structure.
- saa7134 - usual chip
- saa7133/35 - saa7135 is probably a marketing decision, since all those
chips identifies itself as 33 on pci.
Credits
=======
andrew.stevens@philips.com + werner.leeb@philips.com for providing
saa7134 hardware specs and sample board.
Have fun,
Gerd
--
Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]