This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: (38 commits)
kconfig: fix mconf segmentation fault
kbuild: enable use of code from a different dir
kconfig: error out if recursive dependencies are found
kbuild: scripts/basic/fixdep segfault on pathological string-o-death
kconfig: correct minor typo in Kconfig warning message.
kconfig: fix path to modules.txt in Kconfig help
usr/Kconfig: fix typo
kernel-doc: alphabetically-sorted entries in index.html of 'htmldocs'
kbuild: be more explicit on missing .config file
kbuild: clarify the creation of the LOCALVERSION_AUTO string.
kbuild: propagate errors from find in scripts/gen_initramfs_list.sh
kconfig: refer to qt3 if we cannot find qt libraries
kbuild: handle compressed cpio initramfs-es
kbuild: ignore section mismatch warning for references from .paravirtprobe to .init.text
kbuild: remove stale comment in modpost.c
kbuild/mkuboot.sh: allow spaces in CROSS_COMPILE
kbuild: fix make mrproper for Documentation/DocBook/man
kbuild: remove kconfig binaries during make mrproper
kconfig/menuconfig: do not hardcode '.config'
kbuild: override build timestamp & version
...
I have found small bug in mconf, when you run it without any argument it
will sigsegv.
Without patch:
$ scripts/kconfig/mconf
Segmentation fault
With patch:
$ scripts/kconfig/mconf
can't find file (null)
Signed-off-by: Marcin Garski <mgarski@post.pl>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
To introduce support for source in one directory but output files
in another directory during a non O= build prefix all paths
with $(src) repsectively $(obj).
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Sample:
config FOO
bool "This is foo"
depends on BAR
config BAR
bool "This is bar"
depends on FOO
This will result in following error message:
error: found recursive dependency: FOO -> BAR -> FOO
And will then exit with exit code equal 1 so make will stop.
Inspired by patch from: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Adrian Bunk <bunk@stusta.de>
Cc: Roman Zippel <zippel@linux-m68k.org>
build scripts: fixdep blows segfault on string CONFIG_MODULE seen
The string "CONFIG_MODULE" appearing anywhere in a source file causes
fixdep to segfault. This string appeared in the wild in the current
mISDN sources (I think they meant CONFIG_MODULES). But it shouldn't
segfault (esp as CONFIG_MODULE appeared in a quoted string).
Signed-off-by: Andy Green <andy@warmcat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Correct a minor spelling mistake in a Kconfig warning message.
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Somewhat in reponse to kernel bugzilla #8197, be more explicit about
why 'make all' fails when there is no .config file.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
If the find(1) in scripts/gen_initramfs_list.sh generates any errors, it
will cause gen_initramfs_list.sh to fail (because of "set -e"), however
the errors from find are not printed to the user. This is rather confusing:
~/src/powerpc$ make O=~/build/powerpc-cell32/
make[2]: *** [usr/initramfs_data.cpio.gz] Error 1
make[1]: *** [usr] Error 2
make[1]: *** Waiting for unfinished jobs....
make[1]: *** wait: No child processes. Stop.
make: *** [_all] Error 2
It is much easier to work out what the problem is if we let the errors
from find hit the console, eg:
~/src/powerpc$ make O=~/build/powerpc-cell32/
find: /home/michael/initramfs-source/home: Permission denied
find: /home/michael/initramfs-source/lost+found: Permission denied
find: /home/michael/initramfs-source/opt: Permission denied
find: /home/michael/initramfs-source/root: Permission denied
make[2]: *** [usr/initramfs_data.cpio.gz] Error 1
make[1]: *** [usr] Error 2
make[1]: *** Waiting for unfinished jobs....
make[1]: *** wait: No child processes. Stop.
make: *** [_all] Error 2
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
We do not support qt4 (yet) so the simple fix was to warn
that qt3 are missing.
The better fix would have been to implment qt4 support
but that has failed so far.
This solves http://bugzilla.kernel.org/show_bug.cgi?id=8277
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Make kbuild handle compressed cpio initramfs-es. An already compressed
cpio is copied directly to usr/, while a non-compressed cpio is filtered
through gzip (no changes here) on its way to usr/.
If the user has created a compressed cpio by other means, this saves him
from uncompressing it, just to be compressed again by kbuild.
Signed-off-by: Alex Landau <landau.alex@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
I'm currently using CROSS_COMPILE="ccache arm-linux-". With that the bash
builtin command "type" searches for ccache and arm-linux-mkimage and so sets
MKIMAGE="/path/to/ccache" as I don't have arm-linux-mkimage. Then the script
dies with an error, that ccache doesn't support the argument -A.
This patch adds some quoting such that it works again for me.
Please note that this patch doesn't help you if you use ${CROSSCOMPILE}-mkimage
and ccache as mkuboot.sh now searches for the command
"ccache arm-linux-mkimage".
Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Export and use the function conf_get_configname()
to retreive the default configuration filename.
Suggested by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Introduce KBUILD_BUILD_VERSION to make it
possible to override kernel build version
during build time.
Introduce KBUILD_BUILD_TIMESTAMP to make it
possible to override kernel build timestamp
during build time.
But variables are useful mainly by distros
that want to pass info from an SCM when
building the kernel. Timestamp could be last
checkin date for a file etc.
The idea came from Olaf Hering <olaf@aepfle.de>
Cc: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Most system calls seems to get added to i386 first. This patch
automatically generates a warning for any new system call which is
implemented on i386 but not the architecture currently being compiled.
On PowerPC at the moment, for example, it results in these warnings:
init/missing_syscalls.h:935:3: warning: #warning syscall sync_file_range not implemented
init/missing_syscalls.h:947:3: warning: #warning syscall getcpu not implemented
init/missing_syscalls.h:950:3: warning: #warning syscall epoll_pwait not implemented
The file scripts/checksyscalls.sh list a number of legacy system calls
that are ignored because they only makes sense on i386 systems.
Other contributors to this patch are Russell King <rmk+lkml@arm.linux.org.uk>
and Stéphane Jourdois <kwisatz@rubis.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
modpost is now called with .o files that are not modules.
So do not warn if there is no corresponding .mod
file listing .o files (in .tmp_versions/).
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
When loading an alternate configuration use that file as
current configuration filename.
Make the filename visible in the dialog.
Default continue to be .config.
Inspired by patch from: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Some of modpost's warnings are fatal, and some are not. Adopt the
compiler distinction between errors and warnings by calling merror()
for fatal diagnostics and warn() for non-fatal ones.
merror() was used as replacemtn for error() to avoid clash with glibc
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
When changing current menu in search dialog update also main view
Signed-off-by: Marco Costalba <mcostalba@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The index() function is obsolete, use strchr() instead.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
This script is a companion to the "cleanfile" script. This cleans
up a patch in unified diff format *before* it is applied. Note that
the empty lines at the end of file detection *requires* that the diff was
taken with at least one line of context around each hunk, or bad things
will happen.
This script cleans up various classes of stealth whitespace. In
particular, it cleans up:
- Whitespace (spaces or tabs)before newline;
- DOS line endings (CR before LF);
- Space before tab (spaces are deleted or converted to tabs);
- Empty lines at end of file.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
This script cleans up various classes of stealth whitespace. In
particular, it cleans up:
- Whitespace (spaces or tabs)before newline;
- DOS line endings (CR before LF);
- Space before tab (spaces are deleted or converted to tabs);
- Empty lines at end of file.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
