The original Makefile uses "uname -m" to determine ARCH.
This causes problem on x86 when compile perf tool on 32 bit
userspace with a 64 bit kernel.
bench/../../../arch/x86/lib/memcpy_64.S: Assembler messages:
bench/../../../arch/x86/lib/memcpy_64.S:28: Error: bad register name `%rdi'
This is because "uname -m" returns x86_64 and memcpy_64.S is
included in 32 bit build.
Reported-by: Riccardo Magliocchetti <riccardo.magliocchetti@gmail.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Link: http://lkml.kernel.org/r/1304743274.3132.17.camel@localhost
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In hists browser, press hotkey 'a' to annotate current symbol.
Now it causes segment fault if 'a' is pressed on a null symbol.
Here are 2 small bugs:
- In perf_evsel__hists_browse, the condition check after 'a' is pressed
is not correct, we should check ->sym instead of ->map.
- In symbol__tui_annotate we must check whether sym is NULL or not
before getting annotation structure.
This patch fixes above 2 small bugs.
Link: http://lkml.kernel.org/r/1302244286.4106.36.camel@minggr.sh.intel.com
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix this:
util/cgroup.c: In function ‘open_cgroup’:
util/cgroup.c:16:16: error: ‘saved_ptr’ may be used uninitialized in this function
util/cgroup.c:16:16: note: ‘saved_ptr’ was declared here
Apparently newer GCC (4.6) can figure out that this variable is properly
initialized - but some versions of GCC (such as 4.5.2) need help.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86-32, fpu: Fix FPU exception handling on non-SSE systems
x86, hibernate: Initialize mmu_cr4_features during boot
x86-32, NUMA: Fix ACPI NUMA init broken by recent x86-64 change
x86: visws: Fixup irq overhaul fallout
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched: Clean up rebalance_domains() load-balance interval calculation
* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86/mrst/vrtc: Fix boot crash in mrst_rtc_init()
rtc, x86/mrst/vrtc: Fix boot crash in rtc_read_alarm()
* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
genirq: Fix cpumask leak in __setup_irq()
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf probe: Fix listing incorrect line number with inline function
perf probe: Fix to find recursively inlined function
perf probe: Fix multiple --vars options behavior
perf probe: Fix to remove redundant close
perf probe: Fix to ensure function declared file
Fix a bug showing incorrect line number when a probe is put on the head of an
inline function. This patch updates find_perf_probe_point() and introduces new
rules to get correct line number.
- If debuginfo doesn't have a correct file name, we shouldn't return line
number too, because, without file name, line number is meaningless.
- If the address is in a function, it stores the function name and the offset
from the function entry.
- If the address is on a line, it tries to get the relative line number from
the function entry line, except for the address is same as the entry
address of the function (in this case, the relative line number should
be 0).
- If the address is in an inline function entry (call-site), it uses the
inline function call line number as the line on which the address is.
- If the address is in an inline function body, it stores the inline
function name and offset from the inline function call site instead of the
(non-inlined) function.
Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20110330092605.2132.11629.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The default setting of perf record is to mmap 128 pages if the user
did not override with -m.
However the page size may vary accross different architecture
settings, giving different default size between each.
Moreover the kernel side still has a default max number of mlocked
pages of 512 kiB + 1 page for unprivileged users. 128 + 1 pages
with page size > 4096 overlaps this threshold.
Thus, better adapt to this limitation and set the default number of
pages to fit those 512 kiB + 1 page.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <1301535324-9735-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Pick up these two commits from Arnaldo's perf/core tree:
ca6a42586f: perf tools: Emit clearer message for sys_perf_event_open ENOENT return
c286c419c7: perf tools: Fixup exit path when not able to open events
As they are really fixes we want to have sooner than laer.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix the following build error:
GEN python/perf.so
In file included from util/evsel.h:10,
from util/python.c:6:
util/hist.h:106:18: error: newt.h: No such file or directory
error: command 'x86_64-pc-linux-gnu-gcc' failed with exit status 1
make: *** [python/perf.so] Error 1
by passing BASIC_CFLAGS to setup.py. BASIC_CFLAGS variable contains
the -DNO_NEWT_SUPPORT switch which prevents building python c
extension with newt.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <20110329180236.GA19366@erda.amd.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If symbol_conf.priv_size is not a multiple of "sizeof(u64)" we'll bus
error on sparc64 in symbol__new because the "struct symbol *" pointer
is computed by adding symbol_conf.priv_size to the memory allocated.
We cannot isolate the fix to symbol__new and symbol__delete since the
private area is computed by subtracting the priv_size value from a
"struct symbol" pointer, so then the private area can still be
potentially unaligned.
So, simply align the symbol_conf.priv_size value in symbol__init()
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20110328.175849.112593455.davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Resend of patch sent back in January 2011 in light of recent confusion around
unsupported events for a given platform.
Improve sys_perf_event_open ENOENT return handling in top and record, just
like 5a3446b does for stat.
Retry of Arnaldo's patch using ui_warning instead of die which allows the
fallback from hardware cycles to software clock.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
LKML-Reference: <1301080271-20945-1-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
[ committer note: Some adjustments to make it apply to newer codebase ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We have to deal with the TUI mode in perf top, so that we don't end up
with a garbled screen when, say, a non root user on a machine with a
paranoid setting (the default) tries to use 'perf top'.
Introduce a ui__warning_paranoid() routine shared by top and record that
tells the user the valid values for /proc/sys/kernel/perf_event_paranoid.
Cc: David Ahern <daahern@cisco.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf can't currently trace into the vsyscall page. It looks like it was
meant to work.
Tested on 2.6.38 and today's -git.
The bug is easy to reproduce. Compile this:
int main()
{
int i;
struct timespec t;
for(i = 0; i < 10000000; i++)
clock_gettime(CLOCK_MONOTONIC, &t);
return 0;
}
and run it through perf record; perf report. The top entry shows
"[unknown]" and you can't zoom in.
It looks like there are two issues. The first is a that a test for user
mode executing in kernel space is backwards. (That's the first hunk
below). The second (I think) is that something's wrong with the code
that generates lots of little struct dso objects for different sections
-- when it runs on vmlinux it results in bogus long_name values which
cause objdump to fail.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LPU-Reference: <AANLkTikxSw5+wJZUWNz++nL7mgivCh_Zf=2Kq6=f9Ce_@mail.gmail.com>
Signed-off-by: Andy Lutomirski <luto@mit.edu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf, x86: Complain louder about BIOSen corrupting CPU/PMU state and continue
perf, x86: P4 PMU - Read proper MSR register to catch unflagged overflows
perf symbols: Look at .dynsym again if .symtab not found
perf build-id: Add quirk to deal with perf.data file format breakage
perf session: Pass evsel in event_ops->sample()
perf: Better fit max unprivileged mlock pages for tools needs
perf_events: Fix stale ->cgrp pointer in update_cgrp_time_from_cpuctx()
perf top: Fix uninitialized 'counter' variable
tracing: Fix set_ftrace_filter probe function display
perf, x86: Fix Intel fixed counters base initialization
The a1645ce1 changeset:
"perf: 'perf kvm' tool for monitoring guest performance from host"
Added a field to struct build_id_event that broke the file format.
Since the kernel build-id is the first entry, process the table using
the old format if the well known '[kernel.kallsyms]' string for the
kernel build-id has the first 4 characters chopped off (where the pid_t
sits).
Reported-by: Han Pingtian <phan@redhat.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Zhang Yanmin <yanmin_zhang@linux.intel.com>
Cc: stable@kernel.org
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Resolving the sample->id to an evsel since the most advanced tools,
report and annotate, and the others will too when they evolve to
properly support multi-event perf.data files.
Good also because it does an extra validation, checking that the ID is
valid when present. When that is not the case, the overhead is just a
branch + function call (perf_evlist__id2evsel).
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-ktest:
ktest: Add STOP_TEST_AFTER to stop the test after a period of time
ktest: Monitor kernel while running of user tests
ktest: Fix bug where the test would not end after failure
ktest: Add BISECT_FILES to run git bisect on paths
ktest: Add BISECT_SKIP
ktest: Add manual bisect
ktest: Handle kernels before make oldnoconfig
ktest: Start failure timeout on panic too
ktest: Print logfile name on failure
