Commit Graph

902 Commits

Author SHA1 Message Date
David Howells
64d7155cdf UAPI: Remove empty non-UAPI Kbuild files
Remove non-UAPI Kbuild files that have become empty as a result of UAPI
disintegration.  They used to have only header-y lines in them and those have
now moved to the Kbuild files in the corresponding uapi/ directories.

Possibly these should not be removed but rather have a comment inserted to say
they are intentionally left blank.  This would make it easier to add generated
header lines in future without having to restore the infrastructure.

Note that at this point not all the UAPI disintegration parts have been merged,
so it is likely that more empty Kbuild files will turn up.

It is probably necessary to make the files non-empty to prevent the patch
program from automatically deleting them when it reduces them to nothing.

Signed-off-by: David Howells <dhowells@redhat.com>
2012-10-17 12:31:15 +01:00
Linus Torvalds
a5ef3f7dcb Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS update from Ralf Baechle:
 "Cleanups and fixes for breakage that occured earlier during this merge
  phase.  Also a few patches that didn't make the first pull request.
  Of those is the Alchemy work that merges code for many of the SOCs and
  evaluation boards thus among other code shrinkage, reduces the number
  of MIPS defconfigs by 5."

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (22 commits)
  MIPS: SNI: Switch RM400 serial to SCCNXP driver
  MIPS: Remove unused empty_bad_pmd_table[] declaration.
  MIPS: MT: Remove kspd.
  MIPS: Malta: Fix section mismatch.
  MIPS: asm-offset.c: Delete unused irq_cpustat_t struct offsets.
  MIPS: Alchemy: Merge PB1100/1500 support into DB1000 code.
  MIPS: Alchemy: merge PB1550 support into DB1550 code
  MIPS: Alchemy: Single kernel for DB1200/1300/1550
  MIPS: Optimize TLB refill for RI/XI configurations.
  MIPS: proc: Cleanup printing of ASEs.
  MIPS: Hardwire detection of DSP ASE Rev 2 for systems, as required.
  MIPS: Add detection of DSP ASE Revision 2.
  MIPS: Optimize pgd_init and pmd_init
  MIPS: perf: Add perf functionality for BMIPS5000
  MIPS: perf: Split the Kconfig option CONFIG_MIPS_MT_SMP
  MIPS: perf: Remove unnecessary #ifdef
  MIPS: perf: Add cpu feature bit for PCI (performance counter interrupt)
  MIPS: perf: Change the "mips_perf_event" table unsupported indicator.
  MIPS: Align swapper_pg_dir to 64K for better TLB Refill code.
  vmlinux.lds.h: Allow architectures to add sections to the front of .bss
  ...
2012-10-14 14:39:05 -07:00
Linus Torvalds
d25282d1c9 Merge branch 'modules-next' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull module signing support from Rusty Russell:
 "module signing is the highlight, but it's an all-over David Howells frenzy..."

Hmm "Magrathea: Glacier signing key". Somebody has been reading too much HHGTTG.

* 'modules-next' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (37 commits)
  X.509: Fix indefinite length element skip error handling
  X.509: Convert some printk calls to pr_devel
  asymmetric keys: fix printk format warning
  MODSIGN: Fix 32-bit overflow in X.509 certificate validity date checking
  MODSIGN: Make mrproper should remove generated files.
  MODSIGN: Use utf8 strings in signer's name in autogenerated X.509 certs
  MODSIGN: Use the same digest for the autogen key sig as for the module sig
  MODSIGN: Sign modules during the build process
  MODSIGN: Provide a script for generating a key ID from an X.509 cert
  MODSIGN: Implement module signature checking
  MODSIGN: Provide module signing public keys to the kernel
  MODSIGN: Automatically generate module signing keys if missing
  MODSIGN: Provide Kconfig options
  MODSIGN: Provide gitignore and make clean rules for extra files
  MODSIGN: Add FIPS policy
  module: signature checking hook
  X.509: Add a crypto key parser for binary (DER) X.509 certificates
  MPILIB: Provide a function to read raw data into an MPI
  X.509: Add an ASN.1 decoder
  X.509: Add simple ASN.1 grammar compiler
  ...
2012-10-14 13:39:34 -07:00
David Daney
c87728ca82 vmlinux.lds.h: Allow architectures to add sections to the front of .bss
Follow-on MIPS patch will put an object here that needs 64K alignment
to minimize padding.

For those architectures that don't define BSS_FIRST_SECTIONS, there is
no change.

Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: linux-arch@vger.kernel.org,
Cc: linux-kernel@vger.kernel.org
Acked-by: Arnd Bergmann <arnd@arndb.de>
Patchwork: https://patchwork.linux-mips.org/patch/4221/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-10-11 11:02:37 +02:00
Linus Torvalds
9e2d8656f5 Merge branch 'akpm' (Andrew's patch-bomb)
Merge patches from Andrew Morton:
 "A few misc things and very nearly all of the MM tree.  A tremendous
  amount of stuff (again), including a significant rbtree library
  rework."

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (160 commits)
  sparc64: Support transparent huge pages.
  mm: thp: Use more portable PMD clearing sequenece in zap_huge_pmd().
  mm: Add and use update_mmu_cache_pmd() in transparent huge page code.
  sparc64: Document PGD and PMD layout.
  sparc64: Eliminate PTE table memory wastage.
  sparc64: Halve the size of PTE tables
  sparc64: Only support 4MB huge pages and 8KB base pages.
  memory-hotplug: suppress "Trying to free nonexistent resource <XXXXXXXXXXXXXXXX-YYYYYYYYYYYYYYYY>" warning
  mm: memcg: clean up mm_match_cgroup() signature
  mm: document PageHuge somewhat
  mm: use %pK for /proc/vmallocinfo
  mm, thp: fix mlock statistics
  mm, thp: fix mapped pages avoiding unevictable list on mlock
  memory-hotplug: update memory block's state and notify userspace
  memory-hotplug: preparation to notify memory block's state at memory hot remove
  mm: avoid section mismatch warning for memblock_type_name
  make GFP_NOTRACK definition unconditional
  cma: decrease cc.nr_migratepages after reclaiming pagelist
  CMA: migrate mlocked pages
  kpageflags: fix wrong KPF_THP on non-huge compound pages
  ...
2012-10-09 16:23:15 +09:00
Catalin Marinas
2d28a2275c mm: thp: fix the pmd_clear() arguments in pmdp_get_and_clear()
The CONFIG_TRANSPARENT_HUGEPAGE implementation of pmdp_get_and_clear()
calls pmd_clear() with 3 arguments instead of 1.

This happens only for !__HAVE_ARCH_PMDP_GET_AND_CLEAR which doesn't seem
to happen because x86 defines this and it uses pmd_update.

[mhocko@suse.cz: changelog addition]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 16:22:53 +09:00
Gerald Schaefer
46dcde735c thp: introduce pmdp_invalidate()
On s390, a valid page table entry must not be changed while it is attached
to any CPU.  So instead of pmd_mknotpresent() and set_pmd_at(), an IDTE
operation would be necessary there.  This patch introduces the
pmdp_invalidate() function, to allow architecture-specific
implementations.

Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 16:22:29 +09:00
Gerald Schaefer
e3ebcf6438 thp: remove assumptions on pgtable_t type
The thp page table pre-allocation code currently assumes that pgtable_t is
of type "struct page *".  This may not be true for all architectures, so
this patch removes that assumption by replacing the functions
prepare_pmd_huge_pte() and get_pmd_huge_pte() with two new functions that
can be defined architecture-specific.

It also removes two VM_BUG_ON checks for page_count() and page_mapcount()
operating on a pgtable_t.  Apart from the VM_BUG_ON removal, there will be
no functional change introduced by this patch.

Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 16:22:29 +09:00
Konstantin Khlebnikov
b3b9c2932c mm, x86, pat: rework linear pfn-mmap tracking
Replace the generic vma-flag VM_PFN_AT_MMAP with x86-only VM_PAT.

We can toss mapping address from remap_pfn_range() into
track_pfn_vma_new(), and collect all PAT-related logic together in
arch/x86/.

This patch also restores orignal frustration-free is_cow_mapping() check
in remap_pfn_range(), as it was before commit v2.6.28-rc8-88-g3c8bb73
("x86: PAT: store vm_pgoff for all linear_over_vma_region mappings - v3")

is_linear_pfn_mapping() checks can be removed from mm/huge_memory.c,
because it already handled by VM_PFNMAP in VM_NO_THP bit-mask.

[suresh.b.siddha@intel.com: Reset the VM_PAT flag as part of untrack_pfn_vma()]
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Venkatesh Pallipadi <venki@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Venkatesh Pallipadi <venki@google.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 16:22:16 +09:00
Suresh Siddha
5180da410d x86, pat: separate the pfn attribute tracking for remap_pfn_range and vm_insert_pfn
With PAT enabled, vm_insert_pfn() looks up the existing pfn memory
attribute and uses it.  Expectation is that the driver reserves the
memory attributes for the pfn before calling vm_insert_pfn().

remap_pfn_range() (when called for the whole vma) will setup a new
attribute (based on the prot argument) for the specified pfn range.
This addresses the legacy usage which typically calls remap_pfn_range()
with a desired memory attribute.  For ranges smaller than the vma size
(which is typically not the case), remap_pfn_range() will use the
existing memory attribute for the pfn range.

Expose two different API's for these different behaviors.
track_pfn_insert() for tracking the pfn attribute set by vm_insert_pfn()
and track_pfn_remap() for the remap_pfn_range().

This cleanup also prepares the ground for the track/untrack pfn vma
routines to take over the ownership of setting PAT specific vm_flag in
the 'vma'.

[khlebnikov@openvz.org: Clear checks in track_pfn_remap()]
[akpm@linux-foundation.org: tweak a few comments]
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Venkatesh Pallipadi <venki@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 16:22:16 +09:00
Linus Torvalds
50e0d10232 Merge tag 'asm-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
 "This has three changes for asm-generic that did not really fit into
  any other branch as normal asm-generic changes do.  One is a fix for a
  build warning, the other two are more interesting:

   * A patch from Mark Brown to allow using the common clock
     infrastructure on all architectures, so we can use the clock API in
     architecture independent device drivers.

   * The UAPI split patches from David Howells for the asm-generic
     files.  There are other architecture specific series that are going
     through the arch maintainer tree and that depend on this one.

  There may be a few small merge conflicts between Mark's patch and the
  following arch header file split patches.  In each case the solution
  will be to keep the new "generic-y += clkdev.h" line, even if it ends
  up being the only line in the Kbuild file."

* tag 'asm-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  UAPI: (Scripted) Disintegrate include/asm-generic
  asm-generic: Add default clkdev.h
  asm-generic: xor: mark static functions as __maybe_unused
2012-10-09 15:58:38 +09:00
David Howells
aacf29bf1b MPILIB: Provide count_leading/trailing_zeros() based on arch functions
Provide count_leading/trailing_zeros() macros based on extant arch bit scanning
functions rather than reimplementing from scratch in MPILIB.

Whilst we're at it, turn count_foo_zeros(n, x) into n = count_foo_zeros(x).

Also move the definition to asm-generic as other people may be interested in
using it.

Signed-off-by: David Howells <dhowells@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Cc: Arnd Bergmann <arnd@arndb.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-10-08 13:50:11 +10:30
Linus Torvalds
ed5062ddaa Merge branch 'uapi-prep' of git://git.infradead.org/users/dhowells/linux-headers
Pull UAPI disintegration fixes from David Howells:
 "There are three main parts:

 (1) I found I needed some more fixups in the wake of testing Arm64
     (some asm/unistd.h files had weird guards that caused problems -
     mostly in arches for which I don't have a compiler) and some
     __KERNEL__ splitting needed to take place in Arm64.

 (2) I found that c6x was missing some __KERNEL__ guards in its
     asm/signal.h.  Mark Salter pointed me at a tree with a patch to
     remove that file entirely and use the asm-generic variant instead.

 (3) Lastly, m68k turned out to have a header installation problem due
     to it lacking a kvm_para.h file.

     The conditional installation bits for linux/kvm_para.h, linux/kvm.h
     and linux/a.out.h weren't very well specified - and didn't work if
     an arch didn't have the asm/ version of that file, but there *was*
     an asm-generic/ version.

     It seems the "ifneq $((wildcard ...),)" for each of those three
     headers in include/kernel/Kbuild is invoked twice during header
     installation, and the second time it matches on the just installed
     asm-generic/kvm_para.h file and thus incorrectly installs
     linux/kvm_para.h as well.

     Most arches actually have an asm/kvm_para.h, so this wasn't
     detectable in those."

* 'uapi-prep' of git://git.infradead.org/users/dhowells/linux-headers:
  UAPI: Fix conditional header installation handling (notably kvm_para.h on m68k)
  c6x: remove c6x signal.h
  UAPI: Split compound conditionals containing __KERNEL__ in Arm64
  UAPI: Fix the guards on various asm/unistd.h files
  c6x: make dsk6455 the default config
2012-10-07 07:55:10 +09:00
Takuya Yoshikawa
b9034bf1e9 bitops: introduce generic {clear,set}_bit_le()
Needed to replace test_and_set_bit_le() in virt/kvm/kvm_main.c which is
being used for this missing function.

Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Avi Kivity <avi@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-06 03:04:55 +09:00
Arnd Bergmann
c37d6154c0 Merge branch 'disintegrate-asm-generic' of git://git.infradead.org/users/dhowells/linux-headers into asm-generic
Patches from David Howells <dhowells@redhat.com>:

This is to complete part of the UAPI disintegration for which the
preparatory patches were pulled recently.

Note that there are some fixup patches which are at the base of the
branch aimed at you, plus all arches get the asm-generic branch merged in too.

* 'disintegrate-asm-generic' of git://git.infradead.org/users/dhowells/linux-headers:
  UAPI: (Scripted) Disintegrate include/asm-generic
  UAPI: Fix conditional header installation handling (notably kvm_para.h on m68k)
  c6x: remove c6x signal.h
  UAPI: Split compound conditionals containing __KERNEL__ in Arm64
  UAPI: Fix the guards on various asm/unistd.h files

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-10-04 22:57:51 +02:00
David Howells
8a1ab3155c UAPI: (Scripted) Disintegrate include/asm-generic
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
2012-10-04 18:20:15 +01:00
David Howells
890139529d UAPI: Fix the guards on various asm/unistd.h files
asm-generic/unistd.h and a number of asm/unistd.h files have been given
reinclusion guards that allow the guard to be overridden if __SYSCALL is
defined.  Unfortunately, these files define __SYSCALL and don't undefine it
when they've finished with it, thus rendering the guard ineffective.

The reason for this override is to allow the file to be #included multiple
times with different settings on __SYSCALL for purposes like generating syscall
tables.

The following guards are problematic:

arch/arm64/include/asm/unistd.h:#if !defined(__ASM_UNISTD_H) || defined(__SYSCALL)
arch/arm64/include/asm/unistd32.h:#if !defined(__ASM_UNISTD32_H) || defined(__SYSCALL)
arch/c6x/include/asm/unistd.h:#if !defined(_ASM_C6X_UNISTD_H) || defined(__SYSCALL)
arch/hexagon/include/asm/unistd.h:#if !defined(_ASM_HEXAGON_UNISTD_H) || defined(__SYSCALL)
arch/openrisc/include/asm/unistd.h:#if !defined(__ASM_OPENRISC_UNISTD_H) || defined(__SYSCALL)
arch/score/include/asm/unistd.h:#if !defined(_ASM_SCORE_UNISTD_H) || defined(__SYSCALL)
arch/tile/include/asm/unistd.h:#if !defined(_ASM_TILE_UNISTD_H) || defined(__SYSCALL)
arch/unicore32/include/asm/unistd.h:#if !defined(__UNICORE_UNISTD_H__) || defined(__SYSCALL)
include/asm-generic/unistd.h:#if !defined(_ASM_GENERIC_UNISTD_H) || defined(__SYSCALL)

On the assumption that the guards' ineffectiveness has passed unnoticed, just
remove these guards entirely.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
2012-10-04 12:10:18 +01:00
Linus Torvalds
9b2e077c42 Merge tag 'uapi-prep-20121002' of git://git.infradead.org/users/dhowells/linux-headers
Pull preparatory patches for user API disintegration from David Howells:
 "The patches herein prepare for the extraction of the Userspace API
  bits from the various header files named in the Kbuild files.

  New subdirectories are created under either include/uapi/ or
  arch/x/include/uapi/ that correspond to the subdirectory containing
  that file under include/ or arch/x/include/.

  The new subdirs under the uapi/ directory are populated with Kbuild
  files that mostly do nothing at this time.  Further patches will
  disintegrate the headers in each original directory and fill in the
  Kbuild files as they do it.

  These patches also:

   (1) fix up #inclusions of "foo.h" rather than <foo.h>.

   (2) Remove some redundant #includes from the DRM code.

   (3) Make the kernel build infrastructure handle Kbuild files both in
       the old places and the new UAPI place that both specify headers
       to be exported.

   (4) Fix some kernel tools that #include kernel headers during their
       build.

  I have compile tested this with allyesconfig against x86_64,
  allmodconfig against i386 and a scattering of additional defconfigs of
  other arches.  Prepared for main script

  Signed-off-by: David Howells <dhowells@redhat.com>
  Acked-by: Arnd Bergmann <arnd@arndb.de>
  Acked-by: Thomas Gleixner <tglx@linutronix.de>
  Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
  Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
  Acked-by: Dave Jones <davej@redhat.com>
  Acked-by: H. Peter Anvin <hpa@zytor.com>"

* tag 'uapi-prep-20121002' of git://git.infradead.org/users/dhowells/linux-headers:
  UAPI: Plumb the UAPI Kbuilds into the user header installation and checking
  UAPI: x86: Differentiate the generated UAPI and internal headers
  UAPI: Remove the objhdr-y export list
  UAPI: Move linux/version.h
  UAPI: Set up uapi/asm/Kbuild.asm
  UAPI: x86: Fix insn_sanity build failure after UAPI split
  UAPI: x86: Fix the test_get_len tool
  UAPI: (Scripted) Set up UAPI Kbuild files
  UAPI: Partition the header include path sets and add uapi/ header directories
  UAPI: (Scripted) Convert #include "..." to #include <path/...> in kernel system headers
  UAPI: (Scripted) Convert #include "..." to #include <path/...> in drivers/gpu/
  UAPI: (Scripted) Remove redundant DRM UAPI header #inclusions from drivers/gpu/.
  UAPI: Refer to the DRM UAPI headers with <...> and from certain headers only
2012-10-03 13:45:43 -07:00
Mark Brown
e7a570ff7d asm-generic: Add default clkdev.h
Ease the deployment of clkdev by providing a default asm/clkdev.h for
use if the arch does not have an include/asm/clkdev.h.

Due to limitations in Kbuild we manually add clkdev.h to all
architectures that don't have one rather than having the header appear
by default.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Reviewed-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-10-03 21:33:53 +02:00
Arnd Bergmann
720fb1976d asm-generic: xor: mark static functions as __maybe_unused
The asm-generic/xor.h header file is nasty and defines static functions
that are not inline. The header file is include by the ARM version of
asm/xor.h, which uses some but not all of the symbols defined there.

Marking the extraneous functions as __maybe_unused lets gcc drop them
without complaining.

Without this patch, building iop13xx_defconfig results in:

include/asm-generic/xor.h:696:34: warning: 'xor_block_8regs_p' defined but not used [-Wunused-variable]
include/asm-generic/xor.h:704:34: warning: 'xor_block_32regs_p' defined but not used [-Wunused-variable]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Dan Williams <dan.j.williams@gmail.com>
Cc: Neil Brown <neilb@suse.de>
2012-10-03 21:21:06 +02:00
Linus Torvalds
dff8360a4a Merge tag 'gpio-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO changes from Linus Walleij:
 "So this is the LW GPIO patch stack for v3.7:
   - refactoring from Thierry Redding at Arnd Bergmann's request to use
     the seq_file iterator interface in gpiolib.
   - A new driver for Avionic Design's N-bit GPIO expander.
   - Two instances of mutexes replaced by spinlocks from Axel Lin to
     code that is supposed to be fastpath compliant.
   - IRQ demuxer and gpio_to_irq() support for pcf857x by Kuninori
     Morimoto.
   - Dynamic GPIO numbers, device tree support, daisy chaining and some
     other fixes for the 74x164 driver by Maxime Ripard.
   - IRQ domain and device tree support for the tc3589x driver by Lee
     Jones.
   - Some conversion to use managed resources devm_* code.
   - Some instances of clk_prepare() or clk_prepare_enable() added to
     support the new, stricter common clock framework.
   - Some for_each_set_bit() simplifications.
   - Then a lot of fixes as we fixed up all of the above tripping over
     our own shoelaces and that kind of thing."

* tag 'gpio-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (34 commits)
  gpio: pcf857x: select IRQ_DOMAIN
  gpio: Document device_node's det_debounce
  gpio-lpc32xx: Add GPI_28
  gpio: adnp: dt: Reference generic interrupt binding
  gpio: Add Avionic Design N-bit GPIO expander support
  gpio: pxa: using for_each_set_bit to simplify the code
  gpio_msm: using for_each_set_bit to simplify the code
  gpio: Enable the tc3298x GPIO expander driver for Device Tree
  gpio: Provide the tc3589x GPIO expander driver with an IRQ domain
  ARM: shmobile: kzm9g: use gpio-keys instead of gpio-keys-polled
  gpio: pcf857x: fixup smatch WARNING
  gpio: 74x164: Add support for the daisy-chaining
  gpio: 74x164: dts: Add documentation for the dt binding
  dt: Fix incorrect reference in gpio-led documentation
  gpio: 74x164: Add device tree support
  gpio: 74x164: Use dynamic gpio number assignment if no pdata is present
  gpio: 74x164: Use devm_kzalloc
  gpio: 74x164: Use module_spi_driver boiler plate function
  gpio: sx150x: Use irq_data_get_irq_chip_data() at appropriate places
  gpio: em: Use irq_data_get_irq_chip_data() at appropriate places
  ...
2012-10-02 16:05:10 -07:00
David Howells
494b3e1c49 UAPI: Set up uapi/asm/Kbuild.asm
Set up uapi/asm/Kbuild.asm.  This requires the mandatory headers to be
dynamically detected.  The same goes for include/asm/Kbuild.asm.  The problem
is that the header files will be split or moved one at a time, but each header
file in Kbuild.asm's list applies to all arch headers of that name
simultaneously.

The dynamic detection of mandatory files can be undone later.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
2012-10-02 18:01:56 +01:00
Linus Torvalds
81f56e5375 Merge tag 'arm64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64
Pull arm64 support from Catalin Marinas:
 "Linux support for the 64-bit ARM architecture (AArch64)

  Features currently supported:
   - 39-bit address space for user and kernel (each)
   - 4KB and 64KB page configurations
   - Compat (32-bit) user applications (ARMv7, EABI only)
   - Flattened Device Tree (mandated for all AArch64 platforms)
   - ARM generic timers"

* tag 'arm64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: (35 commits)
  arm64: ptrace: remove obsolete ptrace request numbers from user headers
  arm64: Do not set the SMP/nAMP processor bit
  arm64: MAINTAINERS update
  arm64: Build infrastructure
  arm64: Miscellaneous header files
  arm64: Generic timers support
  arm64: Loadable modules
  arm64: Miscellaneous library functions
  arm64: Performance counters support
  arm64: Add support for /proc/sys/debug/exception-trace
  arm64: Debugging support
  arm64: Floating point and SIMD
  arm64: 32-bit (compat) applications support
  arm64: User access library functions
  arm64: Signal handling support
  arm64: VDSO support
  arm64: System calls handling
  arm64: ELF definitions
  arm64: SMP support
  arm64: DMA mapping API
  ...
2012-10-01 11:51:57 -07:00
Roland Stigge
1ae963143e gpio: Document device_node's det_debounce
This patch adds documentation for set_debounce in struct device_node.

Signed-off-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-30 10:27:01 +02:00
David Howells
786d35d45c Make most arch asm/module.h files use asm-generic/module.h
Use the mapping of Elf_[SPE]hdr, Elf_Addr, Elf_Sym, Elf_Dyn, Elf_Rel/Rela,
ELF_R_TYPE() and ELF_R_SYM() to either the 32-bit version or the 64-bit version
into asm-generic/module.h for all arches bar MIPS.

Also, use the generic definition mod_arch_specific where possible.

To this end, I've defined three new config bools:

 (*) HAVE_MOD_ARCH_SPECIFIC

     Arches define this if they don't want to use the empty generic
     mod_arch_specific struct.

 (*) MODULES_USE_ELF_RELA

     Arches define this if their modules can contain RELA records.  This causes
     the Elf_Rela mapping to be emitted and allows apply_relocate_add() to be
     defined by the arch rather than have the core emit an error message.

 (*) MODULES_USE_ELF_REL

     Arches define this if their modules can contain REL records.  This causes
     the Elf_Rel mapping to be emitted and allows apply_relocate() to be
     defined by the arch rather than have the core emit an error message.

Note that it is possible to allow both REL and RELA records: m68k and mips are
two arches that do this.

With this, some arch asm/module.h files can be deleted entirely and replaced
with a generic-y marker in the arch Kbuild file.

Additionally, I have removed the bits from m32r and score that handle the
unsupported type of relocation record as that's now handled centrally.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-28 14:31:03 +09:30