This patch fixes the usage of the perf_event.h header file
between command modules and the supporting code in util.
It is necessary to ensure that ALL files use the SAME
perf_event.h header from the kernel source tree.
There were a couple of #include <linux/perf_event.h> mixed
with #include "../../perf_event.h".
This caused issues on some distros because of mismatch
in the layout of struct perf_event_attr. That eventually
led perf stat to segfault.
Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@gmail.com>
LKML-Reference: <4d233cf0.2308e30a.7b00.ffffc187@mx.google.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
builtin-timechart must only pass -e power:xy events if they are supported by
the running kernel, otherwise try to fetch the old power:power{start,end}
events.
For this I added the tiny helper function:
int is_valid_tracepoint(const char *event_string)
to parse-events.[hc], which could be more generic as an interface and support
hardware/software/... events, not only tracepoints, but someone else could
extend that if needed...
Signed-off-by: Thomas Renninger <trenn@suse.de>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Jean Pihet <j-pihet@ti.com>
LKML-Reference: <1294073445-14812-4-git-send-email-trenn@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
While writing the first user of the routines created from the ad-hoc
routines in the existing builtins I noticed that the resulting set of
calls was too long, reduce it by doing some best effort allocations.
Tools that need to operate on multiple threads and cpus should pre-allocate
enough resources by explicitely calling the perf_evsel__alloc_{fd,counters}
methods.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that later, we can pass the thread_map instance instead of
(thread_num, thread_map) for things like perf_evsel__open and friends,
just like was done with cpu_map.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Abstracting away the loops needed to create the various event fd handlers.
The users have to pass a confiruged perf->evsel.attr field, which is already
usable after perf_evsel__new (constructor) time, using defaults.
Comes out of the ad-hoc routines in builtin-stat, that now uses it.
Fixed a small silly bug where we were die()ing before killing our
children, dysfunctional family this one 8-)
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Out of ad-hoc code and global arrays with hard coded sizes.
This is the first step on having a library that will be first
used on regression tests in the 'perf test' tool.
[acme@felicio linux]$ size /tmp/perf.before
text data bss dec hex filename
1273776 97384 5104416 6475576 62cf38 /tmp/perf.before
[acme@felicio linux]$ size /tmp/perf.new
text data bss dec hex filename
1275422 97416 1392416 2765254 2a31c6 /tmp/perf.new
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
ipchain__fprintf_graph() casts the number of hits in a branch as an
int, which means we lose its highests bits.
This results in meaningless number of callchain hits in perf.data
that have a high number of hits recorded, typically those that have
callchain branches hits appearing more than INT_MAX. This happens
easily as those are pondered by the event period.
Reported-by: Nick Piggin <npiggin@kernel.dk>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
After adding probes, perf-probe(1) reports the probes locations which include
filenames for certain cases.
But for short file names (whose length < 32), perf-probe didn't display the
name correctly. It actually skipped the first character.
Here's an example where 'icmp.c' was screwed:
$ perf probe -n -a "icmp.c;sk=*"
Add new events:
probe:icmp_push_reply (on @cmp.c)
probe:icmp_reply (on @cmp.c)
probe:icmp_reply_1 (on @cmp.c)
probe:icmp_send (on @cmp.c)
probe:icmp_send_1 (on @cmp.c)
probe:icmp_error (on @cmp.c)
probe:icmp_error_1 (on @cmp.c)
probe:icmp_error_2 (on @cmp.c)
probe:icmp_error_3 (on @cmp.c)
This patch fixes this bug in synthesize_perf_probe_point().
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
LKML-Reference: <m31v588r9k.fsf@gmail.com>
Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For kallsyms we don't have the symbol address end, so we do an extra pass and
set the symbol end addr as being the start of the next minus one.
But this was being done just after we filtered the symbols of a
particular type (functions, variables), so the symbol end was sometimes
after what it really is.
Fixing up symbol end also was falling apart when we have symbol aliases,
then the end address of all but the last alias was being set to be
before its start.
Fix it up by checking for symbol aliases and making the kallsyms__parse
routine use the next symbol, whatever its type, as the limit for the
previous symbol, passing that end address to the callback.
This was detected by the 'perf test' synthetic paranoid regression
tests, fix it up so that even that case doesn't mislead us.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When listing a whole file or a function which is located at the end,
perf-probe -L output wrongly: "Source file is shorter than expected.".
This is because show_one_line() always consider EOF as an error.
This patch fixes this by not considering EOF as an error when dumping
the trailing lines. Otherwise it's still an error and perf-probe still
outputs its warning.
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
LKML-Reference: <1292854685-8230-6-git-send-email-fbuihuu@gmail.com>
Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
