* git://git.infradead.org/~dwmw2/rbtree-2.6:
[RBTREE] Switch rb_colour() et al to en_US spelling of 'color' for consistency
Update UML kernel/physmem.c to use rb_parent() accessor macro
[RBTREE] Update hrtimers to use rb_parent() accessor macro.
[RBTREE] Add explicit alignment to sizeof(long) for struct rb_node.
[RBTREE] Merge colour and parent fields of struct rb_node.
[RBTREE] Remove dead code in rb_erase()
[RBTREE] Update JFFS2 to use rb_parent() accessor macro.
[RBTREE] Update eventpoll.c to use rb_parent() accessor macro.
[RBTREE] Update key.c to use rb_parent() accessor macro.
[RBTREE] Update ext3 to use rb_parent() accessor macro.
[RBTREE] Change rbtree off-tree marking in I/O schedulers.
[RBTREE] Add accessor macros for colour and parent fields of rb_node
Some places in ext3 multiple block allocation code (in 2.6.17-rc3) don't
handle the little endian well. This was resulting in *wrong* block numbers
being assigned to in-memory block variables and then stored on disk
eventually. The following patch has been verified to fix an ext3
filesystem failure when run ltp test on a 64 bit machine.
Signed-off-by; Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
All modifications of ->i_flags in inodes that might be visible to
somebody else must be under ->i_mutex. That patch fixes ext3 ioctl()
setting S_APPEND and friends.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
sbi->s_group_desc is an array of pointers to buffer_head. memcpy() of
buffer size from address of buffer_head is a bad idea - it will generate
junk in any case, may oops if buffer_head is close to the end of slab
page and next page is not mapped and isn't what was intended there.
IOW, ->b_data is missing in that call. Fortunately, result doesn't go
into the primary on-disk data structures, so only backup ones get crap
written to them; that had allowed this bug to remain unnoticed until
now.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This adds support for the sys_splice system call. Using a pipe as a
transport, it can connect to files or sockets (latter as output only).
From the splice.c comments:
"splice": joining two ropes together by interweaving their strands.
This is the "extended pipe" functionality, where a pipe is used as
an arbitrary in-memory buffer. Think of a pipe as a small kernel
buffer that you can use to transfer data from one end to the other.
The traditional unix read/write is extended with a "splice()" operation
that transfers data buffers to or from a pipe buffer.
Named by Larry McVoy, original implementation from Linus, extended by
Jens to support splicing to files and fixing the initial implementation
bugs.
Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This is a conversion to make the various file_operations structs in fs/
const. Basically a regexp job, with a few manual fixups
The goal is both to increase correctness (harder to accidentally write to
shared datastructures) and reducing the false sharing of cachelines with
things that get dirty in .data (while .rodata is nicely read only and thus
cache clean)
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
There is no valid reason why we can't support "nobh" option for filesystems
with blocksize != PAGESIZE.
This patch lets them use "nobh" option for writeback mode for blocksize <
pagesize.
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Mingming Cao recently added multi-block allocation support for ext3,
currently used only by DIO. I added support to map multiple blocks for
mpage_readpages(). This patch add support for ext3_get_block() to deal
with multi-block mapping. Basically it renames ext3_direct_io_get_blocks()
as ext3_get_block().
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
- Clean up a few little layout things and comments.
- Add a WARN_ON to a case which I was wondering about.
- Tune up some inlines.
Cc: Mingming Cao <cmm@us.ibm.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Now that get_block() can handle mapping multiple disk blocks, no need to have
->get_blocks(). This patch removes fs specific ->get_blocks() added for DIO
and makes it users use get_block() instead.
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Optimize the block reservation and the multiple block allocation: with the
knowledge of the total number of blocks ahead, set or adjust the reservation
window size properly (based on the number of blocks needed) before block
allocation happens: if there isn't any reservation yet, make sure the
reservation window equals to or greater than the number of blocks needed,
before create an reservation window; if a reservation window is already
exists, try to extends the window size to match the number of blocks to
allocate. This could increase the possibility of completing multiple blocks
allocation in a single request, as blocks are only allocated in the range of
the inode's reservation window.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Update accounting information (quota, boundary checks, free blocks number etc)
in ext3_new_blocks().
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Change ext3_try_to_allocate() (called via ext3_new_blocks()) to try to
allocate the requested number of blocks on a best effort basis: After
allocated the first block, it will always attempt to allocate the next few(up
to the requested size and not beyond the reservation window) adjacent blocks
at the same time.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add support for multiple block allocation in ext3-get-blocks().
Look up the disk block mapping and count the total number of blocks to
allocate, then pass it to ext3_new_block(), where the real block allocation is
performed. Once multiple blocks are allocated, prepare the branch with those
just allocated blocks info and finally splice the whole branch into the block
mapping tree.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Currently ext3_get_block() only maps or allocates one block at a time. This
is quite inefficient for sequential IO workload.
I have posted a early implements a simply multiple block map and allocation
with current ext3. The basic idea is allocating the 1st block in the existing
way, and attempting to allocate the next adjacent blocks on a best effort
basis. More description about the implementation could be found here:
http://marc.theaimsgroup.com/?l=ext2-devel&m=112162230003522&w=2
The following the latest version of the patch: break the original patch into 5
patches, re-worked some logicals, and fixed some bugs. The break ups are:
[patch 1] Adding map multiple blocks at a time in ext3_get_blocks()
[patch 2] Extend ext3_get_blocks() to support multiple block allocation
[patch 3] Implement multiple block allocation in ext3-try-to-allocate
(called via ext3_new_block()).
[patch 4] Proper accounting updates in ext3_new_blocks()
[patch 5] Adjust reservation window size properly (by the given number
of blocks to allocate) before block allocation to increase the
possibility of allocating multiple blocks in a single call.
Tests done so far includes fsx,tiobench and dbench. The following numbers
collected from Direct IO tests (1G file creation/read) shows the system time
have been greatly reduced (more than 50% on my 8 cpu system) with the patches.
1G file DIO write:
2.6.15 2.6.15+patches
real 0m31.275s 0m31.161s
user 0m0.000s 0m0.000s
sys 0m3.384s 0m0.564s
1G file DIO read:
2.6.15 2.6.15+patches
real 0m30.733s 0m30.624s
user 0m0.000s 0m0.004s
sys 0m0.748s 0m0.380s
Some previous test we did on buffered IO with using multiple blocks allocation
and delayed allocation shows noticeable improvement on throughput and system
time.
This patch:
Add support of mapping multiple blocks in one call.
This is useful for DIO reads and re-writes (where blocks are already
allocated), also is in line with Christoph's proposal of using getblocks() in
mpage_readpage() or mpage_readpages().
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The return value of this function is never used, so let's be honest and
declare it as void.
Some places where invalidatepage returned 0, I have inserted comments
suggesting a BUG_ON.
[akpm@osdl.org: JBD BUG fix]
[akpm@osdl.org: rework for git-nfs]
[akpm@osdl.org: don't go BUG in block_invalidate_page()]
Signed-off-by: Neil Brown <neilb@suse.de>
Acked-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When EXT3FS_DEBUG is #define-d, the compile breaks due to #include file
issues.
Signed-off-by: Kirk True <kernel@kirkandsheila.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
In filesystems with the meta block group flag on, ext3_bg_num_gdb() fails
to report the correct number of blocks used to store the group descriptor
backups in a given group. It happens because meta_bg follows a different
logic from the original ext3 backup placement in groups multiples of 3, 5
and 7.
Signed-off-by: Glauber de Oliveira Costa <glommer@br.ibm.com>
Cc: Andreas Dilger <adilger@clusterfs.com>
Cc: "Stephen C. Tweedie" <sct@redhat.com>
Cc: Alex Tomas <alex@clusterfs.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Under I/O load it may take up to a dozen seconds to read all group
descriptors. This is what ext3_statfs() does. At the same time, we already
maintain global numbers of free inodes/blocks. Why don't we use them instead
of group reading and summing?
Cc: Ravikiran G Thirumalai <kiran@scalex86.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Rewrap the overly long source code lines resulting from the previous
patch's addition of the slab cache flag SLAB_MEM_SPREAD. This patch
contains only formatting changes, and no function change.
Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Mark file system inode and similar slab caches subject to SLAB_MEM_SPREAD
memory spreading.
If a slab cache is marked SLAB_MEM_SPREAD, then anytime that a task that's
in a cpuset with the 'memory_spread_slab' option enabled goes to allocate
from such a slab cache, the allocations are spread evenly over all the
memory nodes (task->mems_allowed) allowed to that task, instead of favoring
allocation on the node local to the current cpu.
The following inode and similar caches are marked SLAB_MEM_SPREAD:
file cache
==== =====
fs/adfs/super.c adfs_inode_cache
fs/affs/super.c affs_inode_cache
fs/befs/linuxvfs.c befs_inode_cache
fs/bfs/inode.c bfs_inode_cache
fs/block_dev.c bdev_cache
fs/cifs/cifsfs.c cifs_inode_cache
fs/coda/inode.c coda_inode_cache
fs/dquot.c dquot
fs/efs/super.c efs_inode_cache
fs/ext2/super.c ext2_inode_cache
fs/ext2/xattr.c (fs/mbcache.c) ext2_xattr
fs/ext3/super.c ext3_inode_cache
fs/ext3/xattr.c (fs/mbcache.c) ext3_xattr
fs/fat/cache.c fat_cache
fs/fat/inode.c fat_inode_cache
fs/freevxfs/vxfs_super.c vxfs_inode
fs/hpfs/super.c hpfs_inode_cache
fs/isofs/inode.c isofs_inode_cache
fs/jffs/inode-v23.c jffs_fm
fs/jffs2/super.c jffs2_i
fs/jfs/super.c jfs_ip
fs/minix/inode.c minix_inode_cache
fs/ncpfs/inode.c ncp_inode_cache
fs/nfs/direct.c nfs_direct_cache
fs/nfs/inode.c nfs_inode_cache
fs/ntfs/super.c ntfs_big_inode_cache_name
fs/ntfs/super.c ntfs_inode_cache
fs/ocfs2/dlm/dlmfs.c dlmfs_inode_cache
fs/ocfs2/super.c ocfs2_inode_cache
fs/proc/inode.c proc_inode_cache
fs/qnx4/inode.c qnx4_inode_cache
fs/reiserfs/super.c reiser_inode_cache
fs/romfs/inode.c romfs_inode_cache
fs/smbfs/inode.c smb_inode_cache
fs/sysv/inode.c sysv_inode_cache
fs/udf/super.c udf_inode_cache
fs/ufs/super.c ufs_inode_cache
net/socket.c sock_inode_cache
net/sunrpc/rpc_pipe.c rpc_inode_cache
The choice of which slab caches to so mark was quite simple. I marked
those already marked SLAB_RECLAIM_ACCOUNT, except for fs/xfs, dentry_cache,
inode_cache, and buffer_head, which were marked in a previous patch. Even
though SLAB_RECLAIM_ACCOUNT is for a different purpose, it marks the same
potentially large file system i/o related slab caches as we need for memory
spreading.
Given that the rule now becomes "wherever you would have used a
SLAB_RECLAIM_ACCOUNT slab cache flag before (usually the inode cache), use
the SLAB_MEM_SPREAD flag too", this should be easy enough to maintain.
Future file system writers will just copy one of the existing file system
slab cache setups and tend to get it right without thinking.
Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
