Commit Graph

2226 Commits

Author SHA1 Message Date
Dmitry Kunilov
c045542c68 usb: serial: zte_ev: move support for ZTE AC2726 from zte_ev back to option
commit 52d0dc7597 upstream.

ZTE AC2726 EVDO modem drops ppp connection every minute when driven by
zte_ev but works fine when driven by option. Move the support for AC2726
back to option driver.

Signed-off-by: Dmitry Kunilov <dmitry.kunilov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-09 12:24:20 -08:00
Johan Hovold
d07732a871 USB: serial: fix race in generic write
commit 6f6485463a upstream.

Fix race in generic write implementation, which could lead to
temporarily degraded throughput.

The current generic write implementation introduced by commit
27c7acf220 ("USB: serial: reimplement generic fifo-based writes") has
always had this bug, although it's fairly hard to trigger and the
consequences are not likely to be noticed.

Specifically, a write() on one CPU while the completion handler is
running on another could result in only one of the two write urbs being
utilised to empty the remainder of the write fifo (unless there is a
second write() that doesn't race during that time).

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-09 12:24:19 -08:00
Fangxiaozhi (Franko)
50721ffc36 USB: option: support new huawei devices
commit 2bf308d7bc upstream.

Add new supporting declarations to option.c, to support Huawei new
devices with new bInterfaceProtocol value.

Signed-off-by: fangxiaozhi <huananhu@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-20 07:45:08 -08:00
Gustavo Zacarias
472387193e USB: serial: option: blacklist interface 1 for Huawei E173s-6
commit 8f173e22ab upstream.

Interface 1 on this device isn't for option to bind to otherwise an oops
on usb_wwan with log flooding will happen when accessing the port:

tty_release: ttyUSB1: read/write wait queue active!

It doesn't seem to respond to QMI if it's added to qmi_wwan so don't add
it there - it's likely used by the card reader.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-20 07:45:08 -08:00
Colin Leitner
7724c31ae1 USB: spcp8x5: correct handling of CS5 setting
commit 711fbdfbf2 upstream.

This patch removes an erroneous check of CSIZE, which made it impossible to set
CS5.

Compiles clean, but couldn't test against hardware.

Signed-off-by: Colin Leitner <colin.leitner@gmail.com>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-11 22:36:28 -08:00
Colin Leitner
d410cf277e USB: mos7840: correct handling of CS5 setting
commit 78692cc338 upstream.

This patch removes an erroneous check of CSIZE, which made it impossible to set
CS5.

Compiles clean, but couldn't test against hardware.

Signed-off-by: Colin Leitner <colin.leitner@gmail.com>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-11 22:36:28 -08:00
Colin Leitner
536169b1c9 USB: ftdi_sio: fixed handling of unsupported CSIZE setting
commit 8704211f65 upstream.

FTDI UARTs support only 7 or 8 data bits. Until now the ftdi_sio driver would
only report this limitation for CS6 to dmesg and fail to reflect this fact to
tcgetattr.

This patch reverts the unsupported CSIZE setting and reports the fact with less
severance to dmesg for both CS5 and CS6.

To test the patch it's sufficient to call

    stty -F /dev/ttyUSB0 cs5

which will succeed without the patch and report an error with the patch
applied.

As an additional fix this patch ensures that the control request will always
include a data bit size.

Signed-off-by: Colin Leitner <colin.leitner@gmail.com>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-11 22:36:28 -08:00
Colin Leitner
98e0cc7766 USB: pl2303: fixed handling of CS5 setting
commit a313249937 upstream.

This patch fixes the CS5 setting on the PL2303 USB-to-serial devices. CS5 has a
value of 0 and the CSIZE setting has been skipped altogether by the enclosing
if. Tested on 3.11.6 and the scope shows the correct output after the fix has
been applied.

Tagged to be added to stable, because it fixes a user visible driver bug and is
simple enough to backport easily.

Signed-off-by: Colin Leitner <colin.leitner@gmail.com>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-11 22:36:28 -08:00
Johan Hovold
7471b5f424 USB: mos7840: fix tiocmget error handling
commit a91ccd26e7 upstream.

Make sure to return errors from tiocmget rather than rely on
uninitialised stack data.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-29 11:11:40 -08:00
Rui li
e70bfcc02c USB: add new zte 3g-dongle's pid to option.c
commit 0636fc507a upstream.

Signed-off-by: Rui li <li.rui27@zte.com.cn>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-20 12:27:47 -08:00
Алексей Крамаренко
a73e47ff52 USB: serial: ftdi_sio: add id for Z3X Box device
commit e1466ad5b1 upstream.

Custom VID/PID for Z3X Box device, popular tool for cellphone flashing.

Signed-off-by: Alexey E. Kramarenko <alexeyk13@yandex.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-13 12:05:30 +09:00
Fangxiaozhi (Franko)
75094c77c2 USB: support new huawei devices in option.c
commit d544db293a upstream.

Add new supporting declarations to option.c, to support Huawei new
devices with new bInterfaceSubClass value.

Signed-off-by: fangxiaozhi <huananhu@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-13 12:05:30 +09:00
Enrico Mioso
adc6b15872 usb: serial: option: blacklist Olivetti Olicard200
commit fd8573f582 upstream.

Interface 6 of this device speaks QMI as per tests done by us.
Credits go to Antonella for providing the hardware.

Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com>
Signed-off-by: Antonella Pellizzari <anto.pellizzari83@gmail.com>
Tested-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-04 04:31:07 -08:00
Greg Kroah-Hartman
961e551e0f USB: serial: option: add support for Inovia SEW858 device
commit f4c19b8e16 upstream.

This patch adds the device id for the Inovia SEW858 device to the option driver.

Reported-by: Pavel Parkhomenko <ra85551@gmail.com>
Tested-by: Pavel Parkhomenko <ra85551@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-04 04:31:06 -08:00
Diego Elio Pettenò
e81e74f120 USB: serial: ti_usb_3410_5052: add Abbott strip port ID to combined table as well.
commit c9d09dc7ad upstream.

Without this change, the USB cable for Freestyle Option and compatible
glucometers will not be detected by the driver.

Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-04 04:31:06 -08:00
Michal Malý
1b069646f5 USB: serial: option: Ignore card reader interface on Huawei E1750
commit eb2addd404 upstream.

Hi,

my Huawei 3G modem has an embedded Smart Card reader which causes
trouble when the modem is being detected (a bunch of "<warn>  (ttyUSBx):
open blocked by driver for more than 7 seconds!" in messages.log). This
trivial patch corrects the problem for me. The modem identifies itself
as "12d1:1406 Huawei Technologies Co., Ltd. E1750" in lsusb although the
description on the body says "Model E173u-1"

Signed-off-by: Michal Malý <madcatxster@prifuk.cz>
Cc: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-13 16:08:33 -07:00
Johan Hovold
7965eef853 USB: mos7720: fix big-endian control requests
commit 3b716caf19 upstream.

Fix endianess bugs in parallel-port code which caused corrupt
control-requests to be issued on big-endian machines.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26 17:18:06 -07:00
Dan Carpenter
3765762187 USB: mos7720: use GFP_ATOMIC under spinlock
commit d0bd9a4118 upstream.

The write_parport_reg_nonblock() function shouldn't sleep because it's
called with spinlocks held.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26 17:18:06 -07:00
Matt Burtch
237e015319 USB-Serial: Fix error handling of usb_wwan
commit 6c1ee66a0b upstream.

This fixes an issue where the bulk-in urb used for incoming data transfer
is not resubmitted if the packet recieved contains an error status.  This
results in the driver locking until the port is closed and re-opened.

Tested on a custom board with a Cinterion GSM module.

Signed-off-by: Matt Burtch <matt@grid-net.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-20 08:43:05 -07:00
Johan Hovold
91508a9ae0 USB: keyspan: fix null-deref at disconnect and release
commit ff8a43c10f upstream.

Make sure to fail properly if the device is not accepted during attach
in order to avoid null-pointer derefs (of missing interface private
data) at disconnect or release.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-20 08:43:04 -07:00
Johan Hovold
f56852aeaa USB: mos7720: fix broken control requests
commit ef6c8c1d73 upstream.

The parallel-port code of the drivers used a stack allocated
control-request buffer for asynchronous (and possibly deferred) control
requests. This not only violates the no-DMA-from-stack requirement but
could also lead to corrupt control requests being submitted.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-20 08:43:04 -07:00
Johan Hovold
d802afca86 USB: mos7840: fix big-endian probe
commit d551ec9b69 upstream.

Fix bug in device-type detection on big-endian machines originally
introduced by commit 0eafe4de ("USB: serial: mos7840: add support for
MCS7810 devices") which always matched on little-endian product ids.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-20 08:43:04 -07:00
Johan Hovold
0179a37034 USB: ti_usb_3410_5052: fix big-endian firmware handling
commit e877dd2f25 upstream.

Fix endianess bugs in firmware handling introduced by commits cb7a7c6a
("ti_usb_3410_5052: add Multi-Tech modem support") and 05a3d905
("ti_usb_3410_5052: support alternate firmware") which made the driver
use the wrong firmware for certain devices on big-endian machines.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-20 08:43:04 -07:00
Johan Hovold
499c97f9a9 USB: mos7840: fix pointer casts
commit 683a0e4d79 upstream.

Silence compiler warnings on 64-bit systems introduced by commit
05cf0dec ("USB: mos7840: fix race in led handling") which uses the
usb-serial data pointer to temporarily store the device type during
probe but failed to add the required casts.

[gregkh - change uintptr_t to unsigned long]

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-11 18:35:21 -07:00
Johan Hovold
62a2cfc242 USB: mos7840: fix race in led handling
commit 05cf0dec5c upstream.

Fix race in LED handling introduced by commit 0eafe4de ("USB: serial:
mos7840: add support for MCS7810 devices") which reused the port control
urb for manipulating the LED without making sure that the urb is not
already in use. This could lead to the control urb being manipulated
while in flight.

Fix by adding a dedicated LED urb and ctrlrequest along with a LED-busy
flag to handle concurrency.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-11 18:35:21 -07:00