Interrupts with the IRQF_FORCE_RESUME flag set have also the
IRQF_NO_SUSPEND flag set. They are not disabled in the suspend path, but
must be forcefully resumed. That's used by XEN to keep IPIs enabled beyond
the suspension of device irqs. Force resume works by pretending that the
interrupt was disabled and then calling __irq_enable().
Incrementing the disabled depth counter was enough to do that, but with the
recent changes which use state flags to avoid unnecessary hardware access,
this is not longer sufficient. If the state flags are not set, then the
hardware callbacks are not invoked and the interrupt line stays disabled in
"hardware".
Set the disabled and masked state when pretending that an interrupt got
disabled by suspend.
Fixes: bf22ff45bed6 ("genirq: Avoid unnecessary low level irq function calls")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: xen-devel@lists.xenproject.org
Cc: boris.ostrovsky@oracle.com
Link: http://lkml.kernel.org/r/20170717174703.4603-2-jgross@suse.com
(cherry picked from commit a696712c3dd54eb58d2c5a807b4aaa27782d80d6)
Conflicts:
kernel/irq/internals.h
[due to missing upstream patch: b354286effa5 irq: Privatize irq_common_data::state_use_accessors]
Change-Id: I94d230ff1a7ccac1234432384685b5ef9d116b0a
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Shared interrupts do not go well with disabling auto enable:
1) The sharing interrupt might request it while it's still disabled and
then wait for interrupts forever.
2) The interrupt might have been requested by the driver sharing the line
before IRQ_NOAUTOEN has been set. So the driver which expects that
disabled state after calling request_irq() will not get what it wants.
Even worse, when it calls enable_irq() later, it will trigger the
unbalanced enable_irq() warning.
Reported-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: dianders@chromium.org
Cc: jeffy <jeffy.chen@rock-chips.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: tfiga@chromium.org
Link: http://lkml.kernel.org/r/20170531100212.210682135@linutronix.de
(cherry picked from commit 04c848d398797a626608ff48804d809ae6687163)
Change-Id: I89711656f22e15697c76a4dcb9c60c8b0c8052d2
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
If an interrupt is marked NOAUTOEN then request_irq() installs the action,
but does not enable the interrupt via startup_irq(). The interrupt is
enabled via enable_irq() later from the driver. enable_irq() calls
irq_enable().
That means that for interrupts which have a irq_startup() callback this
callback is never invoked. Neither is irq_domain_activate_irq() invoked for
such interrupts.
If an interrupt depends on irq_startup() or irq_domain_activate_irq() then
the enable via irq_enable() is not enough.
Add a status flag IRQD_IRQ_STARTED_UP and use this to select the proper
mechanism in enable_irq(). Use the flag also to avoid pointless calls into
the low level functions.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: dianders@chromium.org
Cc: jeffy <jeffy.chen@rock-chips.com>
Cc: Brian Norris <briannorris@chromium.org>
Cc: tfiga@chromium.org
Link: http://lkml.kernel.org/r/20170531100212.130986205@linutronix.de
(cherry picked from commit 201d7f47f34bd7cb19161d0426f13b141e381f30)
Conflicts:
include/linux/irq.h
[due to missing upstream patches:
08d85f3 irqdomain: Avoid activating interrupts more than once
1a3d28a UPSTREAM: genirq: Introduce IRQD_AFFINITY_MANAGED flag
6297714 UPSTREAM: irq: Privatize irq_common_data::state_use_accessors]
Change-Id: Ie8d492c694171fa81e3df61e8561bec160ad37bb
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
* linux-linaro-lsk-v4.4-android: (510 commits)
Linux 4.4.103
Revert "sctp: do not peel off an assoc from one netns to another one"
xen: xenbus driver must not accept invalid transaction ids
s390/kbuild: enable modversions for symbols exported from asm
ASoC: wm_adsp: Don't overrun firmware file buffer when reading region data
btrfs: return the actual error value from from btrfs_uuid_tree_iterate
ASoC: rsnd: don't double free kctrl
netfilter: nf_tables: fix oob access
netfilter: nft_queue: use raw_smp_processor_id()
spi: SPI_FSL_DSPI should depend on HAS_DMA
staging: iio: cdc: fix improper return value
iio: light: fix improper return value
mac80211: Suppress NEW_PEER_CANDIDATE event if no room
mac80211: Remove invalid flag operations in mesh TSF synchronization
drm: Apply range restriction after color adjustment when allocation
ALSA: hda - Apply ALC269_FIXUP_NO_SHUTUP on HDA_FIXUP_ACT_PROBE
ath10k: set CTS protection VDEV param only if VDEV is up
ath10k: fix potential memory leak in ath10k_wmi_tlv_op_pull_fw_stats()
ath10k: ignore configuring the incorrect board_id
ath10k: fix incorrect txpower set by P2P_DEVICE interface
...
Conflicts:
drivers/media/v4l2-core/v4l2-ctrls.c
kernel/sched/fair.c
Change-Id: I48152b2a0ab1f9f07e1da7823119b94f9b9e1751
commit 4bdced5c9a2922521e325896a7bbbf0132c94e56 upstream.
When a CPU lowers its priority (schedules out a high priority task for a
lower priority one), a check is made to see if any other CPU has overloaded
RT tasks (more than one). It checks the rto_mask to determine this and if so
it will request to pull one of those tasks to itself if the non running RT
task is of higher priority than the new priority of the next task to run on
the current CPU.
When we deal with large number of CPUs, the original pull logic suffered
from large lock contention on a single CPU run queue, which caused a huge
latency across all CPUs. This was caused by only having one CPU having
overloaded RT tasks and a bunch of other CPUs lowering their priority. To
solve this issue, commit:
b6366f048e ("sched/rt: Use IPI to trigger RT task push migration instead of pulling")
changed the way to request a pull. Instead of grabbing the lock of the
overloaded CPU's runqueue, it simply sent an IPI to that CPU to do the work.
Although the IPI logic worked very well in removing the large latency build
up, it still could suffer from a large number of IPIs being sent to a single
CPU. On a 80 CPU box, I measured over 200us of processing IPIs. Worse yet,
when I tested this on a 120 CPU box, with a stress test that had lots of
RT tasks scheduling on all CPUs, it actually triggered the hard lockup
detector! One CPU had so many IPIs sent to it, and due to the restart
mechanism that is triggered when the source run queue has a priority status
change, the CPU spent minutes! processing the IPIs.
Thinking about this further, I realized there's no reason for each run queue
to send its own IPI. As all CPUs with overloaded tasks must be scanned
regardless if there's one or many CPUs lowering their priority, because
there's no current way to find the CPU with the highest priority task that
can schedule to one of these CPUs, there really only needs to be one IPI
being sent around at a time.
This greatly simplifies the code!
The new approach is to have each root domain have its own irq work, as the
rto_mask is per root domain. The root domain has the following fields
attached to it:
rto_push_work - the irq work to process each CPU set in rto_mask
rto_lock - the lock to protect some of the other rto fields
rto_loop_start - an atomic that keeps contention down on rto_lock
the first CPU scheduling in a lower priority task
is the one to kick off the process.
rto_loop_next - an atomic that gets incremented for each CPU that
schedules in a lower priority task.
rto_loop - a variable protected by rto_lock that is used to
compare against rto_loop_next
rto_cpu - The cpu to send the next IPI to, also protected by
the rto_lock.
When a CPU schedules in a lower priority task and wants to make sure
overloaded CPUs know about it. It increments the rto_loop_next. Then it
atomically sets rto_loop_start with a cmpxchg. If the old value is not "0",
then it is done, as another CPU is kicking off the IPI loop. If the old
value is "0", then it will take the rto_lock to synchronize with a possible
IPI being sent around to the overloaded CPUs.
If rto_cpu is greater than or equal to nr_cpu_ids, then there's either no
IPI being sent around, or one is about to finish. Then rto_cpu is set to the
first CPU in rto_mask and an IPI is sent to that CPU. If there's no CPUs set
in rto_mask, then there's nothing to be done.
When the CPU receives the IPI, it will first try to push any RT tasks that is
queued on the CPU but can't run because a higher priority RT task is
currently running on that CPU.
Then it takes the rto_lock and looks for the next CPU in the rto_mask. If it
finds one, it simply sends an IPI to that CPU and the process continues.
If there's no more CPUs in the rto_mask, then rto_loop is compared with
rto_loop_next. If they match, everything is done and the process is over. If
they do not match, then a CPU scheduled in a lower priority task as the IPI
was being passed around, and the process needs to start again. The first CPU
in rto_mask is sent the IPI.
This change removes this duplication of work in the IPI logic, and greatly
lowers the latency caused by the IPIs. This removed the lockup happening on
the 120 CPU machine. It also simplifies the code tremendously. What else
could anyone ask for?
Thanks to Peter Zijlstra for simplifying the rto_loop_start atomic logic and
supplying me with the rto_start_trylock() and rto_start_unlock() helper
functions.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Clark Williams <williams@redhat.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott Wood <swood@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170424114732.1aac6dc4@gandalf.local.home
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7c2102e56a3f7d85b5d8f33efbd7aecc1f36fdd8 upstream.
The current implementation of synchronize_sched_expedited() incorrectly
assumes that resched_cpu() is unconditional, which it is not. This means
that synchronize_sched_expedited() can hang when resched_cpu()'s trylock
fails as follows (analysis by Neeraj Upadhyay):
o CPU1 is waiting for expedited wait to complete:
sync_rcu_exp_select_cpus
rdp->exp_dynticks_snap & 0x1 // returns 1 for CPU5
IPI sent to CPU5
synchronize_sched_expedited_wait
ret = swait_event_timeout(rsp->expedited_wq,
sync_rcu_preempt_exp_done(rnp_root),
jiffies_stall);
expmask = 0x20, CPU 5 in idle path (in cpuidle_enter())
o CPU5 handles IPI and fails to acquire rq lock.
Handles IPI
sync_sched_exp_handler
resched_cpu
returns while failing to try lock acquire rq->lock
need_resched is not set
o CPU5 calls rcu_idle_enter() and as need_resched is not set, goes to
idle (schedule() is not called).
o CPU 1 reports RCU stall.
Given that resched_cpu() is now used only by RCU, this commit fixes the
assumption by making resched_cpu() unconditional.
Reported-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Suggested-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0d0e57697f162da4aa218b5feafe614fb666db07 upstream.
The patch fixes two things at once:
1) It checks the env->allow_ptr_leaks and only prints the map address to
the log if we have the privileges to do so, otherwise it just dumps 0
as we would when kptr_restrict is enabled on %pK. Given the latter is
off by default and not every distro sets it, I don't want to rely on
this, hence the 0 by default for unprivileged.
2) Printing of ldimm64 in the verifier log is currently broken in that
we don't print the full immediate, but only the 32 bit part of the
first insn part for ldimm64. Thus, fix this up as well; it's okay to
access, since we verified all ldimm64 earlier already (including just
constants) through replace_map_fd_with_map_ptr().
Fixes: 1be7f75d16 ("bpf: enable non-root eBPF programs")
Fixes: cbd3570086 ("bpf: verifier (add ability to receive verification log)")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 4.4: s/bpf_verifier_env/verifier_env/]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit d194ba5d712f051ff6c025f3484bb72f219764e3.
Reason for revert: Broke some builds. Will fix and resubmit.
Change-Id: I4e6fa1562346eda1bbf058f1d5ace5ba6256ce07
Boosted RT tasks can be deboosted quickly, this makes boost usless
for RT tasks and causes lots of glitching. Use timers to prevent
de-boost too soon and wait for long enough such that next enqueue
happens after a threshold.
While this can be solved in the governor, there are following
advantages:
- The approach used is governor-independent
- Reduces boost group lock contention for frequently sleepers/wakers
- Works with schedfreq without any other schedfreq hacks.
Bug: 30210506
Change-Id: I41788b235586988be446505deb7c0529758a9898
Signed-off-by: Joel Fernandes <joelaf@google.com>
We all should be using (and improving) the schedutil governor now. Get
rid of the non-upstream governor.
Tested on Hikey.
Change-Id: Ic660756536e5da51952738c3c18b94e31f58cd57
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This patch adds schedtune enqueue/dequeue to RT scheduling class.
Change-Id: If416e64319d62191f3aedd675d3e9a21fe2102fb
Signed-off-by: Joel Fernandes <joelaf@google.com>
util_delta becomes not zero in eenv_before, which will affect the
calculation of grp_util in group_idle_state(). Fix it under the
new condition.
Change-Id: Ic3853bb45876a8e388afcbe4e72d25fc42b1d7b0
Signed-off-by: Ke Wang <ke.wang@spreadtrum.com>
If no energy saving for target_cpu in the calculation of energy_diff(),
backup_cpu will be set as the new dst_cpu for the next calculation. At this
point, we also need update the new trg_cpu as backup_cpu to make sure the
subsequent calculation of energy_diff() is correct.
Signed-off-by: Ke Wang <ke.wang@spreadtrum.com>
Before commit 5f8b3a757d65 ("sched/fair: consider task utilization in
group_norm_util()"), eenv->util_delta is used to distinguish energy
before and energy after in sched_group_energy(). After that commit,
eenv->util_delta can not do that any more.
In this commit, use trg_cpu to distinguish energy before/after in
sched_group_energy().
Before apply this commit, cap_before/cap_delta is not correct:
<idle>-0 [001] 147504.608920: sched_energy_diff: pid=7 comm=rcu_preempt
src_cpu=1 dst_cpu=3 usage_delta=7 nrg_before=250 nrg_after=250 nrg_diff=0
cap_before=0 cap_after=528 cap_delta=1056 nrg_delta=0 nrg_payoff=0
After apply this commit, cap_before/cap_delta retrun to normal:
<idle>-0 [001] 220.494011: sched_energy_diff: pid=7 comm=rcu_preempt
src_cpu=1 dst_cpu=2 usage_delta=3 nrg_before=248 nrg_after=248 nrg_diff=0
cap_before=528 cap_after=528 cap_delta=0 nrg_delta=0 nrg_payoff=0
Signed-off-by: Ke Wang <ke.wang@spreadtrum.com>
Upmigrate misfit current task upon scheduler tick with stopper.
We can kick an random (not necessarily big CPU) NOHZ idle CPU when a
CPU bound task is in need of upmigration. But it's not efficient as that
way needs following unnecessary wakeups:
1. Busy little CPU A to kick idle B
2. B runs idle balancer and enqueue migration/A
3. B goes idle
4. A runs migration/A, enqueues busy task on B.
5. B wakes up again.
This change makes active upmigration more efficiently by doing:
1. Busy little CPU A find target CPU B upon tick.
2. CPU A enqueues migration/A.
Change-Id: Ie865738054ea3296f28e6ba01710635efa7193c0
[joonwoop: The original version had logic to reserve CPU. The logic is
omitted in this version.]
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
Signed-off-by: Vikram Mulukutla <markivx@codeaurora.org>
Currently active_load_balance_cpu_stop is run by cpu stopper and it
pushes running tasks off the busiest CPU onto idle target CPU. But
there is no check to see whether target cpu is offline or not before
pushing the tasks. With the introduction of active migration in the
scheduler tick path (see check_for_migration()) there have been
instances of attempts to migrate tasks to offline CPUs.
Add a check as to whether the target cpu is online or not to prevent
scheduling on offline CPUs.
Change-Id: Ib8ac7f8aeabd3ca7365f3eae977075952dab4f21
Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org>
[rameezmustafa@codeaurora.org]: Port to msm-3.18]
Signed-off-by: Syed Rameez Mustafa <rameezmustafa@codeaurora.org
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
Signed-off-by: Vikram Mulukutla <markivx@codeaurora.org>
Active balance currently picks one task to migrate from busy cpu to
a chosen cpu (push_cpu). This patch extends active load balance to
recognize a particular task ('push_task') that needs to be migrated to
'push_cpu'. This capability will be leveraged by HMP-aware task
placement in a subsequent patch.
Change-Id: If31320111e6cc7044e617b5c3fd6d8e0c0e16952
Signed-off-by: Srivatsa Vaddagiri <vatsa@codeaurora.org>
[rameezmustafa@codeaurora.org]: Port to msm-3.18]
Signed-off-by: Syed Rameez Mustafa <rameezmustafa@codeaurora.org>
This reverts commit a899b9085c8d5d581b214c24dc707466e8cb479f.
Reverting for now due to suspend warning issues.
Change-Id: I9387297b52552a73d5a253b9e8e4467b366479a5
