The IR-Drop is always different between different boards, so we
need know the IR-Drop to adjust opp-table to guarantee stably
for the board.
Change-Id: I8ad05d30e15a7e62910a952cc6fa199d70129660
Signed-off-by: Liang Chen <cl@rock-chips.com>
Some chips need adjust opp level by different chip-process, add
common functions to select opp level from device-tree, so modules
can select opp level easy.
Change-Id: Ifbd5f720e6a52a68f13697bbb37ac01ff4a87e3e
Signed-off-by: Liang Chen <cl@rock-chips.com>
This adds the necessary data for handling dmcfreq on the rk3328
Change-Id: If4cff5cc372f80b6776a7272a1bff54abef2cf33
Signed-off-by: CanYang He <hcy@rock-chips.com>
There is a frequency map table between vop bandwidth and dmc, when vop
bandwidth is changed, the dmc frequency will also be changed to specified
frequency.
If new request frequency is greater than old request frequency, update dmc
target frequency immediately. If new request frequency is less than old
request frequency, only update min_freq and max_freq.
Change-Id: Ib5bf098faf5ffa72e60c34aa686431352420e69b
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
This makes dmc driver possible to register a system status notifier and
other drivers possible to call the notifier call-back easily, so that
the dmc driver can change frequency according to different system status.
Change-Id: I1a4fb4649366d75310d2e29f87775bb2d9ca3d67
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
This function registers a notifier to dmc devfreq, devfreq thread will
lock the mutex of vop when scaling frequency, so vop_crtc will not be
disabled when it is waiting for line flag.
Change-Id: I886e5dc5d36a0f14f35662cec3423a2c5550a7a6
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
This function registers a notifier to dmc devfreq, it will lock the mutex
of pmu when scaling frequency, so that pd driver and dmc driver will not
assess register PMU_BUS_IDLE_REQ at the same time.
Change-Id: I0ba96599d9050d11924d032146e6b4d415629614
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
1. amend return frequency for scpi_ddr_set_clk_rate.
2. add scpi_ddr_dclk_mode function for rk3368.
Change-Id: I0f3c42d74e34ccb740f2a9e68ef12bba98b7aab7
Signed-off-by: Tang Yun ping <typ@rock-chips.com>
This adds fixed below errors when compiled rockchip_defconfig without
CONFIG_RK3368_SCPI_PROTOCOL select:
In file included from drivers/clk/rockchip/clk-ddr.c:23:0:
include/soc/rockchip/scpi.h:89:12: warning:
'scpi_sys_set_jtagmux_on_off' defined but not used [-Wunused-function]
error, forbidden warning: scpi.h:89
scripts/Makefile.build:258: recipe for target
'drivers/clk/rockchip/clk-ddr.o' failed
make[3]: *** [drivers/clk/rockchip/clk-ddr.o] Error 1
Change-Id: I5abc184554dcfc3697be82aede8dec27da2fcdd9
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
This adds move rk3368-mbox related *.h files from linux/rockchip
to soc/rockchip.
Change-Id: I2d57b6baa64d531e89766a5384d8c217cf347ebf
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
LSK 17.03 v4.4-android
* tag 'lsk-v4.4-17.03-android': (166 commits)
Linux 4.4.55
ext4: don't BUG when truncating encrypted inodes on the orphan list
dm: flush queued bios when process blocks to avoid deadlock
nfit, libnvdimm: fix interleave set cookie calculation
s390/kdump: Use "LINUX" ELF note name instead of "CORE"
KVM: s390: Fix guest migration for huge guests resulting in panic
mvsas: fix misleading indentation
serial: samsung: Continue to work if DMA request fails
USB: serial: io_ti: fix information leak in completion handler
USB: serial: io_ti: fix NULL-deref in interrupt callback
USB: iowarrior: fix NULL-deref in write
USB: iowarrior: fix NULL-deref at probe
USB: serial: omninet: fix reference leaks at open
USB: serial: safe_serial: fix information leak in completion handler
usb: host: xhci-plat: Fix timeout on removal of hot pluggable xhci controllers
usb: host: xhci-dbg: HCIVERSION should be a binary number
usb: gadget: function: f_fs: pass companion descriptor along
usb: dwc3: gadget: make Set Endpoint Configuration macros safe
usb: gadget: dummy_hcd: clear usb_gadget region before registration
powerpc: Emulation support for load/store instructions on LE
...
Change-Id: I4db95bbe5b2523e19ddf22b3f65863f7f6d46632
On new rockchip platform(rk3399 etc), there have dcf controller to
do ddr frequency scaling, and this controller will implement in
arm-trust-firmware. We add a special clock-type to handle that.
Change-Id: I9e15dd9e01ab1c51a639a6a59391cd5e0de383b7
Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Pull ARM SoC driver updates from Olof Johansson:
"As we've enabled multiplatform kernels on ARM, and greatly done away
with the contents under arch/arm/mach-*, there's still need for
SoC-related drivers to go somewhere.
Many of them go in through other driver trees, but we still have
drivers/soc to hold some of the "doesn't fit anywhere" lowlevel code
that might be shared between ARM and ARM64 (or just in general makes
sense to not have under the architecture directory).
This branch contains mostly such code:
- Drivers for qualcomm SoCs for SMEM, SMD and SMD-RPM, used to
communicate with power management blocks on these SoCs for use by
clock, regulator and bus frequency drivers.
- Allwinner Reduced Serial Bus driver, again used to communicate with
PMICs.
- Drivers for ARM's SCPI (System Control Processor). Not to be
confused with PSCI (Power State Coordination Interface). SCPI is
used to communicate with the assistant embedded cores doing power
management, and we have yet to see how many of them will implement
this for their hardware vs abstracting in other ways (or not at all
like in the past).
- To make confusion between SCPI and PSCI more likely, this release
also includes an update of PSCI to interface version 1.0.
- Rockchip support for power domains.
- A driver to talk to the firmware on Raspberry Pi"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (57 commits)
soc: qcom: smd-rpm: Correct size of outgoing message
bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus
bus: sunxi-rsb: Add Allwinner Reduced Serial Bus (RSB) controller bindings
ARM: bcm2835: add mutual inclusion protection
drivers: psci: make PSCI 1.0 functions initialization version dependent
dt-bindings: Correct paths in Rockchip power domains binding document
soc: rockchip: power-domain: don't try to print the clock name in error case
soc: qcom/smem: add HWSPINLOCK dependency
clk: berlin: add cpuclk
ARM: berlin: dts: add CLKID_CPU for BG2Q
ARM: bcm2835: Add the Raspberry Pi firmware driver
soc: qcom: smem: Move RPM message ram out of smem DT node
soc: qcom: smd-rpm: Correct the active vs sleep state flagging
soc: qcom: smd: delete unneeded of_node_put
firmware: qcom-scm: build for correct architecture level
soc: qcom: smd: Correct SMEM items for upper channels
qcom-scm: add missing prototype for qcom_scm_is_available()
qcom-scm: fix endianess issue in __qcom_scm_is_call_available
soc: qcom: smd: Reject send of too big packets
soc: qcom: smd: Handle big endian CPUs
...
This gives us a function for making mailbox property channel requests
of the firmware, which is most notable in that it will let us get and
set clock rates.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Pull iommu updates for from Joerg Roedel:
"This time the IOMMU updates are mostly cleanups or fixes. No big new
features or drivers this time. In particular the changes include:
- Bigger cleanup of the Domain<->IOMMU data structures and the code
that manages them in the Intel VT-d driver. This makes the code
easier to understand and maintain, and also easier to keep the data
structures in sync. It is also a preparation step to make use of
default domains from the IOMMU core in the Intel VT-d driver.
- Fixes for a couple of DMA-API misuses in ARM IOMMU drivers, namely
in the ARM and Tegra SMMU drivers.
- Fix for a potential buffer overflow in the OMAP iommu driver's
debug code
- A couple of smaller fixes and cleanups in various drivers
- One small new feature: Report domain-id usage in the Intel VT-d
driver to easier detect bugs where these are leaked"
* tag 'iommu-updates-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (83 commits)
iommu/vt-d: Really use upper context table when necessary
x86/vt-d: Fix documentation of DRHD
iommu/fsl: Really fix init section(s) content
iommu/io-pgtable-arm: Unmap and free table when overwriting with block
iommu/io-pgtable-arm: Move init-fn declarations to io-pgtable.h
iommu/msm: Use BUG_ON instead of if () BUG()
iommu/vt-d: Access iomem correctly
iommu/vt-d: Make two functions static
iommu/vt-d: Use BUG_ON instead of if () BUG()
iommu/vt-d: Return false instead of 0 in irq_remapping_cap()
iommu/amd: Use BUG_ON instead of if () BUG()
iommu/amd: Make a symbol static
iommu/amd: Simplify allocation in irq_remapping_alloc()
iommu/tegra-smmu: Parameterize number of TLB lines
iommu/tegra-smmu: Factor out tegra_smmu_set_pde()
iommu/tegra-smmu: Extract tegra_smmu_pte_get_use()
iommu/tegra-smmu: Use __GFP_ZERO to allocate zeroed pages
iommu/tegra-smmu: Remove PageReserved manipulation
iommu/tegra-smmu: Convert to use DMA API
iommu/tegra-smmu: smmu_flush_ptc() wants device addresses
...
