commit 203cbf77de59fc8f13502dcfd11350c6d4a5c95f upstream.
If CONFIG_TIME_LOW_RES is enabled we add a jiffie to the relative timeout to
prevent short sleeps, but we do not account for that in interfaces which
retrieve the remaining time.
Helge observed that timerfd can return a remaining time larger than the
relative timeout. That's not expected and breaks userland test programs.
Store the information that the timer was armed relative and provide functions
to adjust the remaining time. To avoid bloating the hrtimer struct make state
a u8, which as a bonus results in better code on x86 at least.
Reported-and-tested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: linux-m68k@lists.linux-m68k.org
Cc: dhowells@redhat.com
Link: http://lkml.kernel.org/r/20160114164159.273328486@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8d91f8b15361dfb438ab6eb3b319e2ded43458ff upstream.
@console_may_schedule tracks whether console_sem was acquired through
lock or trylock. If the former, we're inside a sleepable context and
console_conditional_schedule() performs cond_resched(). This allows
console drivers which use console_lock for synchronization to yield
while performing time-consuming operations such as scrolling.
However, the actual console outputting is performed while holding
irq-safe logbuf_lock, so console_unlock() clears @console_may_schedule
before starting outputting lines. Also, only a few drivers call
console_conditional_schedule() to begin with. This means that when a
lot of lines need to be output by console_unlock(), for example on a
console registration, the task doing console_unlock() may not yield for
a long time on a non-preemptible kernel.
If this happens with a slow console devices, for example a serial
console, the outputting task may occupy the cpu for a very long time.
Long enough to trigger softlockup and/or RCU stall warnings, which in
turn pile more messages, sometimes enough to trigger the next cycle of
warnings incapacitating the system.
Fix it by making console_unlock() insert cond_resched() between lines if
@console_may_schedule.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Calvin Owens <calvinowens@fb.com>
Acked-by: Jan Kara <jack@suse.com>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Kyle McMartin <kyle@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6ccd83714a009ee301b50c15f6c3a5dc1f30164c upstream.
When a max stack trace is discovered, the stack dump is saved. In order to
not record the overhead of the stack tracer, the ip of the traced function
is looked for within the dump. The trace is started from the location of
that function. But if for some reason the ip is not found, the entire stack
trace is then truncated. That's not very useful. Instead, print everything
if the ip of the traced function is not found within the trace.
This issue showed up on s390.
Link: http://lkml.kernel.org/r/20160129102241.1b3c9c04@gandalf.local.home
Fixes: 72ac426a5b ("tracing: Clean up stack tracing and fix fentry updates")
Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Emulate NMIs on systems where they are not available by using timer
interrupts on other cpus. Each cpu will use its softlockup hrtimer
to check that the next cpu is processing hrtimer interrupts by
verifying that a counter is increasing.
This patch is useful on systems where the hardlockup detector is not
available due to a lack of NMIs, for example most ARM SoCs.
Without this patch any cpu stuck with interrupts disabled can
cause a hardware watchdog reset with no debugging information,
but with this patch the kernel can detect the lockup and panic,
which can result in useful debugging info.
Change-Id: Ia5faf50243e19c1755201212e04c8892d929785a
Signed-off-by: Colin Cross <ccross@android.com>
(cherry picked from commit https://lkml.org/lkml/2015/12/21/337)
ASLR only uses as few as 8 bits to generate the random offset for the
mmap base address on 32 bit architectures. This value was chosen to
prevent a poorly chosen value from dividing the address space in such
a way as to prevent large allocations. This may not be an issue on all
platforms. Allow the specification of a minimum number of bits so that
platforms desiring greater ASLR protection may determine where to place
the trade-off.
Bug: 24047224
Signed-off-by: Daniel Cashman <dcashman@android.com>
Signed-off-by: Daniel Cashman <dcashman@google.com>
Change-Id: Ibf9ed3d4390e9686f5cc34f605d509a20d40e6c2
Update vma_merge() call in private anonymous memory prctl,
introduced in AOSP commit ee8c5f78f09a
"mm: add a field to store names for private anonymous memory",
so as to align with changes from upstream commit 19a809afe2
"userfaultfd: teach vma_merge to merge across vma->vm_userfaultfd_ctx".
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Userspace processes often have multiple allocators that each do
anonymous mmaps to get memory. When examining memory usage of
individual processes or systems as a whole, it is useful to be
able to break down the various heaps that were allocated by
each layer and examine their size, RSS, and physical memory
usage.
This patch adds a user pointer to the shared union in
vm_area_struct that points to a null terminated string inside
the user process containing a name for the vma. vmas that
point to the same address will be merged, but vmas that
point to equivalent strings at different addresses will
not be merged.
Userspace can set the name for a region of memory by calling
prctl(PR_SET_VMA, PR_SET_VMA_ANON_NAME, start, len, (unsigned long)name);
Setting the name to NULL clears it.
The names of named anonymous vmas are shown in /proc/pid/maps
as [anon:<name>] and in /proc/pid/smaps in a new "Name" field
that is only present for named vmas. If the userspace pointer
is no longer valid all or part of the name will be replaced
with "<fault>".
The idea to store a userspace pointer to reduce the complexity
within mm (at the expense of the complexity of reading
/proc/pid/mem) came from Dave Hansen. This results in no
runtime overhead in the mm subsystem other than comparing
the anon_name pointers when considering vma merging. The pointer
is stored in a union with fieds that are only used on file-backed
mappings, so it does not increase memory usage.
Includes fix from Jed Davis <jld@mozilla.com> for typo in
prctl_set_vma_anon_name, which could attempt to set the name
across two vmas at the same time due to a typo, which might
corrupt the vma list. Fix it to use tmp instead of end to limit
the name setting to a single vma at a time.
Change-Id: I9aa7b6b5ef536cd780599ba4e2fba8ceebe8b59f
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
Add a userspace visible knob to tell the VM to keep an extra amount
of memory free, by increasing the gap between each zone's min and
low watermarks.
This is useful for realtime applications that call system
calls and have a bound on the number of allocations that happen
in any short time period. In this application, extra_free_kbytes
would be left at an amount equal to or larger than than the
maximum number of allocations that happen in any burst.
It may also be useful to reduce the memory use of virtual
machines (temporarily?), in a way that does not cause memory
fragmentation like ballooning does.
[ccross]
Revived for use on old kernels where no other solution exists.
The tunable will be removed on kernels that do better at avoiding
direct reclaim.
Change-Id: I765a42be8e964bfd3e2886d1ca85a29d60c3bb3e
Signed-off-by: Rik van Riel<riel@redhat.com>
Signed-off-by: Colin Cross <ccross@android.com>
At times, it is necessary for boards to provide some additional information
as part of panic logs. Provide information on the board hardware as part
of panic logs.
It is safer to print this information at the very end in case something
bad happens as part of the information retrieval itself.
To use this, set global mach_panic_string to an appropriate string in the
board file.
Change-Id: Id12cdda87b0cd2940dd01d52db97e6162f671b4d
Signed-off-by: Nishanth Menon <nm@ti.com>
Make PR_SET_TIMERSLACK_PID consider pid namespace and resolve the
target pid in the caller's namespace. Otherwise, calls from pid
namespace other than init would fail or affect the wrong task.
Change-Id: I1da15196abc4096536713ce03714e99d2e63820a
Signed-off-by: Micha Kalfon <micha@cellrox.com>
Acked-by: Oren Laadan <orenl@cellrox.com>
The case clause for the PR_SET_TIMERSLACK_PID option was placed inside
the an internal switch statement for PR_MCE_KILL (see commits 37a591d4
and 8ae872f1) . This commit moves it to the right place.
Change-Id: I63251669d7e2f2aa843d1b0900e7df61518c3dea
Signed-off-by: Micha Kalfon <micha@cellrox.com>
Acked-by: Oren Laadan <orenl@cellrox.com>
Adds a capable() check to make sure that arbitary apps do not change the
timer slack for other apps.
Bug: 15000427
Change-Id: I558a2551a0e3579c7f7e7aae54b28aa9d982b209
Signed-off-by: Ruchi Kandoi <kandoiruchi@google.com>
Second argument is similar to PR_SET_TIMERSLACK, if non-zero then the
slack is set to that value otherwise sets it to the default for the thread.
Takes PID of the thread as the third argument.
This allows power/performance management software to set timer slack for
other threads according to its policy for the thread (such as when the
thread is designated foreground vs. background activity)
Change-Id: I744d451ff4e60dae69f38f53948ff36c51c14a3f
Signed-off-by: Ruchi Kandoi <kandoiruchi@google.com>
Refactor *allow_attach() handler to align it with the changes
from mainline commit 1f7dd3e5a6 "cgroup: fix handling of
multi-destination migration from subtree_control enabling".
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
In 53b5e2f generic cgroup subsystem permission checks have been added.
When this is been done within procs_write an empty taskset is added to
the tasks css set. When a task later on migrates to a new group we see a
dmesg warning cause the mg_node isn't empty (cgroup.c:2086). Cause this
happens all the time this spams dmesg.
I am not really familiar with this code, but it looks to me like adding
the taskset is just a temporary action in this context. Therefore this
taskset should be removed after the actual check. This is what this fix
does.
This problem was seen and the fix tested on x86 using l-mr1 and master.
Change-Id: I9894d39e8b5692ef65149002b07e65a84a33ffea
Signed-off-by: Christian Poetzsch <christian.potzsch@imgtec.com>
- Return -EINVAL when cgroups support isn't enabled
- Add allow_attach callback in CPU cgroups
Change-Id: Id3360b4a39919524fc4b6fcbd44fa2050009f000
Signed-off-by: Rom Lemarchand <romlem@android.com>
Rather than using explicit euid == 0 checks when trying to move
tasks into a cgroup via CFS, move permission checks into each
specific cgroup subsystem. If a subsystem does not specify a
'allow_attach' handler, then we fall back to doing our checks
the old way.
Use the 'allow_attach' handler for the 'cpu' cgroup to allow
non-root processes to add arbitrary processes to a 'cpu' cgroup
if it has the CAP_SYS_NICE capability set.
This version of the patch adds a 'allow_attach' handler instead
of reusing the 'can_attach' handler. If the 'can_attach' handler
is reused, a new cgroup that implements 'can_attach' but not
the permission checks could end up with no permission checks
at all.
Change-Id: Icfa950aa9321d1ceba362061d32dc7dfa2c64f0c
Original-Author: San Mehat <san@google.com>
Signed-off-by: Colin Cross <ccross@android.com>
