commit 21a3c96 uses node_start/end_pfn(nid) for detection start/end
of nodes. But, it's not defined in linux/mmzone.h but defined in
/arch/???/include/mmzone.h which is included only under
CONFIG_NEED_MULTIPLE_NODES=y.
Then, we see
mm/page_cgroup.c: In function 'page_cgroup_init':
mm/page_cgroup.c:308: error: implicit declaration of function 'node_start_pfn'
mm/page_cgroup.c:309: error: implicit declaration of function 'node_end_pfn'
So, fixiing page_cgroup.c is an idea...
But node_start_pfn()/node_end_pfn() is a very generic macro and
should be implemented in the same manner for all archs.
(m32r has different implementation...)
This patch removes definitions of node_start/end_pfn() in each archs
and defines a unified one in linux/mmzone.h. It's not under
CONFIG_NEED_MULTIPLE_NODES, now.
A result of macro expansion is here (mm/page_cgroup.c)
for !NUMA
start_pfn = ((&contig_page_data)->node_start_pfn);
end_pfn = ({ pg_data_t *__pgdat = (&contig_page_data); __pgdat->node_start_pfn + __pgdat->node_spanned_pages;});
for NUMA (x86-64)
start_pfn = ((node_data[nid])->node_start_pfn);
end_pfn = ({ pg_data_t *__pgdat = (node_data[nid]); __pgdat->node_start_pfn + __pgdat->node_spanned_pages;});
Changelog:
- fixed to avoid using "nid" twice in node_end_pfn() macro.
Reported-and-acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Reported-and-tested-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This change introduces a few of the less controversial /proc and
/proc/sys interfaces for tile, along with sysfs attributes for
various things that were originally proposed as /proc/tile files.
It also adjusts the "hardwall" proc API.
Arnd Bergmann reviewed the initial arch/tile submission, which
included a complete set of all the /proc/tile and /proc/sys/tile
knobs that we had added in a somewhat ad hoc way during initial
development, and provided feedback on where most of them should go.
One knob turned out to be similar enough to the existing
/proc/sys/debug/exception-trace that it was re-implemented to use
that model instead.
Another knob was /proc/tile/grid, which reported the "grid" dimensions
of a tile chip (e.g. 8x8 processors = 64-core chip). Arnd suggested
looking at sysfs for that, so this change moves that information
to a pair of sysfs attributes (chip_width and chip_height) in the
/sys/devices/system/cpu directory. We also put the "chip_serial"
and "chip_revision" information from our old /proc/tile/board file
as attributes in /sys/devices/system/cpu.
Other information collected via hypervisor APIs is now placed in
/sys/hypervisor. We create a /sys/hypervisor/type file (holding the
constant string "tilera") to be parallel with the Xen use of
/sys/hypervisor/type holding "xen". We create three top-level files,
"version" (the hypervisor's own version), "config_version" (the
version of the configuration file), and "hvconfig" (the contents of
the configuration file). The remaining information from our old
/proc/tile/board and /proc/tile/switch files becomes an attribute
group appearing under /sys/hypervisor/board/.
Finally, after some feedback from Arnd Bergmann for the previous
version of this patch, the /proc/tile/hardwall file is split up into
two conceptual parts. First, a directory /proc/tile/hardwall/ which
contains one file per active hardwall, each file named after the
hardwall's ID and holding a cpulist that says which cpus are enclosed by
the hardwall. Second, a /proc/PID file "hardwall" that is either
empty (for non-hardwall-using processes) or contains the hardwall ID.
Finally, this change pushes the /proc/sys/tile/unaligned_fixup/
directory, with knobs controlling the kernel code for handling the
fixup of unaligned exceptions.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: (26 commits)
arch/tile: prefer "tilepro" as the name of the 32-bit architecture
compat: include aio_abi.h for aio_context_t
arch/tile: cleanups for tilegx compat mode
arch/tile: allocate PCI IRQs later in boot
arch/tile: support signal "exception-trace" hook
arch/tile: use better definitions of xchg() and cmpxchg()
include/linux/compat.h: coding-style fixes
tile: add an RTC driver for the Tilera hypervisor
arch/tile: finish enabling support for TILE-Gx 64-bit chip
compat: fixes to allow working with tile arch
arch/tile: update defconfig file to something more useful
tile: do_hardwall_trap: do not play with task->sighand
tile: replace mm->cpu_vm_mask with mm_cpumask()
tile,mn10300: add device parameter to dma_cache_sync()
audit: support the "standard" <asm-generic/unistd.h>
arch/tile: clarify flush_buffer()/finv_buffer() function names
arch/tile: kernel-related cleanups from removing static page size
arch/tile: various header improvements for building drivers
arch/tile: disable GX prefetcher during cache flush
arch/tile: tolerate disabling CONFIG_BLK_DEV_INITRD
...
With this change, you can (and should) build with ARCH=tilepro for the
current 32-bit chips. Building with ARCH=tile continues to work, but
we've renamed the defconfig file to tilepro_defconfig for consistency.
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
* 'for-2.6.40' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
percpu: Unify input section names
percpu: Avoid extra NOP in percpu_cmpxchg16b_double
percpu: Cast away printk format warning
percpu: Always align percpu output section to PAGE_SIZE
Fix up fairly trivial conflict in arch/x86/include/asm/percpu.h as per Tejun
These changes make the syscall table line up correctly for
tilegx compat mode, and remove the stale sys32_fadvise64() function,
which isn't actually used by any syscall table.
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
This change became required due to some recent reworking in the
platform-independent IRQ code. It is required for 2.6.38 and later.
Cc: stable@kernel.org
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
This change adds support for /proc/sys/debug/exception-trace to tile.
Like x86 and sparc, by default it is set to "1", generating a one-line
printk whenever a user process crashes. By setting it to "2", we get
a much more complete userspace diagnostic at crash time, including
a user-space backtrace, register dump, and memory dump around the
address of the crash.
Some vestiges of the Tilera-internal version of this support are
removed with this patch (the show_crashinfo variable and the
arch_coredump_signal function). We retain a "crashinfo" boot parameter
which allows you to set the boot-time value of exception-trace.
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
These definitions use a ({}) construct to avoid some cases where
we were getting warnings about unused return values. We also
promote the definition to the common <asm/atomic.h>, since it applies
to both the 32- and 64-bit atomics.
In addition, define __HAVE_ARCH_CMPXCHG for TILE-Gx since it has
efficient direct atomic instructions.
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
This is a simple RTC driver that lets Tilera hardware boot up and
set the clock correctly.
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
This support was partially present in the existing code (look for
"__tilegx__" ifdefs) but with this change you can build a working
kernel using the TILE-Gx toolchain and ARCH=tilegx.
Most of these files are new, generally adding a foo_64.c file
where previously there was just a foo_32.c file.
The ARCH=tilegx directive redirects to arch/tile, not arch/tilegx,
using the existing SRCARCH mechanism in the top-level Makefile.
Changes to existing files:
- <asm/bitops.h> and <asm/bitops_32.h> changed to factor the
include of <asm-generic/bitops/non-atomic.h> in the common header.
- <asm/compat.h> and arch/tile/kernel/compat.c changed to remove
the "const" markers I had put on compat_sys_execve() when trying
to match some recent similar changes to the non-compat execve.
It turns out the compat version wasn't "upgraded" to use const.
- <asm/opcode-tile_64.h> and <asm/opcode_constants_64.h> were
previously included accidentally, with the 32-bit contents. Now
they have the proper 64-bit contents.
Finally, I had to hack the existing hacky drivers/input/input-compat.h
to add yet another "#ifdef" for INPUT_COMPAT_TEST (same as x86_64).
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> [drivers/input]
The existing <asm-generic/unistd.h> mechanism doesn't really provide
enough to create the 64-bit "compat" ABI properly in a generic way,
since the compat ABI is a mix of things were you can re-use the 64-bit
versions of syscalls and things where you need a compat wrapper.
To provide this in the most direct way possible, I added two new macros
to go along with the existing __SYSCALL and __SC_3264 macros: __SC_COMP
and SC_COMP_3264. These macros take an additional argument, typically a
"compat_sys_xxx" function, which is passed to __SYSCALL if you define
__SYSCALL_COMPAT when including the header, resulting in a pointer to
the compat function being placed in the generated syscall table.
The change also adds some missing definitions to <linux/compat.h> so that
it actually has declarations for all the compat syscalls, since the
"[nr] = ##call" approach requires proper C declarations for all the
functions included in the syscall table.
Finally, compat.c defines compat_sys_sigpending() and
compat_sys_sigprocmask() even if the underlying architecture doesn't
request it, which tries to pull in undefined compat_old_sigset_t defines.
We need to guard those compat syscall definitions with appropriate
__ARCH_WANT_SYS_xxx ifdefs.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
1. do_hardwall_trap() checks ->sighand != NULL and then takes ->siglock.
This is unsafe even if the task can't run (I assume it is pinned to
the same CPU), its parent can reap the task and set ->sighand = NULL
right after this check. Even if the compiler dosn't read ->sighand
twice and this memory can't to away __group_send_sig_info() is wrong
after that. Use do_send_sig_info().
2. Send SIGILL to the thread, not to the whole process. Unless it has
the handler or blocked this kills the whole thread-group as before.
IIUC, different threads can be bound to different rect's.
3. Check PF_EXITING instead of ->sighand. A zombie thread can go away
but its ->sighand can be !NULL.
Reported-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
We plan to change mm->cpu_vm_mask definition later. Thus, this patch convert
it into proper macro.
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Since v2.6.20 "Pass struct dev pointer to dma_cache_sync()"
(d3fa72e455), dma_cache_sync() takes a
struct dev pointer, but these appear to be missing from the tile and
mn10300 implementations, so add them.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
[cmetcalf@tilera.com: took only the "tile" portion as I don't maintain mn10300]
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
They are only applicable for locally-homecached memory ranges, so
change their names to {flush,finv}_buffer_local(). Change inv_buffer()
to just do an mf instead of any kind of fancier barrier, since you're
obviously not going to be waiting for anything once the local homecache
is invalidated.
Fix tilepro.c network driver not to bother calling finv_buffer when
stopping the EPP, but just mf after memset to ensure that it will not
see any packet data after we finish stopping; use finv_buffer_remote()
when doing exit-time cleanup.
This also fixes a (not very interesting) generic Linux build failure
where drivers/scsi/st.c declares its own flush_buffer().
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
User space code has been able to discover the static page size
by including a special <hv/pagesize.h> file. In the current release,
that file is now gone, and <asm/page.h> doesn't rely on it. The
getpagesize() API is now the only way for userspace to get the page size.
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
This change adds a number of missing headers in asm (fb.h, parport.h,
serial.h, and vga.h) using the minimal generic versions.
It also adds a number of missing interfaces that showed up as build
failures when trying to build various drivers not normally included in the
"tile" distribution: ioremap_wc(), memset_io(), io{read,write}{16,32}be(),
virt_to_bus(), bus_to_virt(), irq_canonicalize(), __pte(), __pgd(),
and __pmd(). I also added a cast in virt_to_page() since not all callers
pass a pointer.
I fixed <asm/stat.h> to properly include a __KERNEL__ guard for the
__ARCH_WANT_STAT64 symbol, and <asm/swab.h> to use __builtin_bswap32()
even for our 64-bit architecture, since the same code is produced.
I added an export for get_cycles(), since it's used in some modules.
And I made <arch/spr_def.h> properly include the __KERNEL__ guard,
even though it's not yet exported, since it likely will be soon.
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Otherwise, it's possible to end up with the prefetcher pulling
data into cache that the code believes has been flushed.
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
