* Theodore Ts'o (tytso@mit.edu) wrote:
>
> I've been playing with adding some markers into ext4 to see if they
> could be useful in solving some problems along with Systemtap. It
> appears, though, that as of 2.6.27-rc8, markers defined in code which is
> compiled directly into the kernel (i.e., not as modules) don't show up
> in Module.markers:
>
> kvm_trace_entryexit arch/x86/kvm/kvm-intel %u %p %u %u %u %u %u %u
> kvm_trace_handler arch/x86/kvm/kvm-intel %u %p %u %u %u %u %u %u
> kvm_trace_entryexit arch/x86/kvm/kvm-amd %u %p %u %u %u %u %u %u
> kvm_trace_handler arch/x86/kvm/kvm-amd %u %p %u %u %u %u %u %u
>
> (Note the lack of any of the kernel_sched_* markers, and the markers I
> added for ext4_* and jbd2_* are missing as wel.)
>
> Systemtap apparently depends on in-kernel trace_mark being recorded in
> Module.markers, and apparently it's been claimed that it used to be
> there. Is this a bug in systemtap, or in how Module.markers is getting
> built? And is there a file that contains the equivalent information
> for markers located in non-modules code?
I think the problem comes from "markers: fix duplicate modpost entry"
(commit d35cb360c2)
Especially :
- add_marker(mod, marker, fmt);
+ if (!mod->skip)
+ add_marker(mod, marker, fmt);
}
return;
fail:
Here is a fix that should take care if this problem.
Thanks for the bug report!
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Tested-by: "Theodore Ts'o" <tytso@mit.edu>
CC: Greg KH <greg@kroah.com>
CC: David Smith <dsmith@redhat.com>
CC: Roland McGrath <roland@redhat.com>
CC: Sam Ravnborg <sam@ravnborg.org>
CC: Wenji Huang <wenji.huang@oracle.com>
CC: Takashi Nishiie <t-nishiie@np.css.fujitsu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit f072181e64 ("kconfig: drop the
""trying to assign nonexistent symbol" warning") simply dropped the
warnings, but it does a little more than that, it also marks the current
.config as needed saving, so add this back.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Recent changes to oldconfig have mixed up the silentoldconfig handling,
so this fixes that by clearly separating that special mode, e.g.
KCONFIG_NOSILENTUPDATE is only relevant here, the .config is written as
needed.
This will also properly close Bug 11230.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Struct members may be marked as private by using
/* private: */
before them, as noted in Documentation/kernel-doc-nano-HOWTO.txt
Fix kernel-doc to handle structs whose members are all private;
otherwise invalid XML is generated:
xmlto: input does not validate (status 3)
linux-2.6.27-rc6-git4/Documentation/DocBook/debugobjects.xml:146: element variablelist: validity error : Element variablelist content does not follow the DTD, expecting ((title , titleabbrev?)? , varlistentry+), got ()
Document linux-2.6.27-rc6-git4/Documentation/DocBook/debugobjects.xml does not validate
make[1]: *** [Documentation/DocBook/debugobjects.html] Error 3
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Reported-by: Roland McGrath <roland@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In August 2006 I posted a patch generating a minimal SELinux policy. This
week, David P. Quigley posted an updated version of that as a patch against
the kernel. It also had nice logic for auto-installing the policy.
Following is David's original patch intro (preserved especially
bc it has stats on the generated policies):
se interested in the changes there were only two significant
changes. The first is that the iteration through the list of classes
used NULL as a sentinel value. The problem with this is that the
class_to_string array actually has NULL entries in its table as place
holders for the user space object classes.
The second change was that it would seem at some point the initial sids
table was NULL terminated. This is no longer the case so that iteration
has to be done on array length instead of looking for NULL.
Some statistics on the policy that it generates:
The policy consists of 523 lines which contain no blank lines. Of those
523 lines 453 of them are class, permission, and initial sid
definitions. These lines are usually little to no concern to the policy
developer since they will not be adding object classes or permissions.
Of the remaining 70 lines there is one type, one role, and one user
statement. The remaining lines are broken into three portions. The first
group are TE allow rules which make up 29 of the remaining lines, the
second is assignment of labels to the initial sids which consist of 27
lines, and file system labeling statements which are the remaining 11.
In addition to the policy.conf generated there is a single file_contexts
file containing two lines which labels the entire system with base_t.
This policy generates a policy.23 binary that is 7920 bytes.
(then a few versions later...):
The new policy is 587 lines (stripped of blank lines) with 476 of those
lines being the boilerplate that I mentioned last time. The remaining
111 lines have the 3 lines for type, user, and role, 70 lines for the
allow rules (one for each object class including user space object
classes), 27 lines to assign types to the initial sids, and 11 lines for
file system labeling. The policy binary is 9194 bytes.
Changelog:
Aug 26: Added Documentation/SELinux.txt
Aug 26: Incorporated a set of comments by Stephen Smalley:
1. auto-setup SELINUXTYPE=dummy
2. don't auto-install if selinux is enabled with
non-dummy policy
3. don't re-compute policy version
4. /sbin/setfiles not /usr/sbin/setfiles
Aug 22: As per JMorris comments, made sure make distclean
cleans up the mdp directory.
Removed a check for file_contexts which is now
created in the same file as the check, making it
superfluous.
Signed-off-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: David Quigley <dpquigl@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
With 22454cb99f we added only the
first entry of the device table. We need to loop over the whole
device list.
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
scripts/patch-kernel script can't patch a tree, say, from 2.6.25 to
2.6.26.1, because of a wrong comparison in context of patching 2.6.x base.
Fix it.
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Fix handling of nested structs or unions. The regex to strip (eliminate)
nested structs or unions was limited to only 0 or 1 matches. This can
cause an uneven number of left/right braces to be stripped, which causes
this:
Warning(linux-2.6.27-rc1-git2//include/net/mac80211.h:336): No description found for parameter '}'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
kconfig: drop the ""trying to assign nonexistent symbol" warning
kconfig: always write out .config
They really stand out now that make *config is less chatty - and
they are generally ignored - so drop them.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Adrian Bunk <bunk@kernel.org>
People don't like them and think they're errors.
Leave the __fw_install one though; when 'make firmware_install' does
nothing, it's best to have a 'Nothing to be done for...' message rather
than just doing nothing.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
It would have saved both a bug submitter and me a few hours if
scripts/ver_linux had picked the same gcc as the build.
Since I can't see any reason why it fiddles with PATH at all this patch
therefore removes the PATH setting.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The extern flag currently is not included in type dump files
(genksyms --dump-types). Include that flag there for completeness.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
We are having two kinds of problems with genksyms today: fake checksum
changes without actual ABI changes, and changes which we would rather like
to ignore (such as an additional field at the end of a structure that
modules are not supposed to touch, for example).
I have thought about ways to improve genksyms and compute checksums
differently to avoid those problems, but in the end I don't see a
fundamentally better way. So here are some genksyms patches for at least
making the checksums more easily manageable, if we cannot fully fix them.
In addition to the bugfixes (the first two patches), this allows genksyms
to track checksum changes and report why a checksum changed (third patch),
and to selectively ignore changes (fourth patch).
This patch:
Gcc __attribute__ definitions may occur repeatedly, e.g.,
static int foo __attribute__((__used__))
__attribute__((aligned (16)));
The genksyms parser does not understand this, and generates a syntax error.
Fix this case.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
gcc 4.3 correctly determines that input() is unused and gives the
following warning:
<-- snip -->
...
HOSTCC scripts/genksyms/lex.o
scripts/genksyms/lex.c:1487: warning: ‘input’ defined but not used
...
<-- snip -->
Fix it by adding %option noinput to scripts/genksyms/lex.l and
regeneration of scripts/genksyms/lex.c_shipped.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
gcc 4.3 correctly determines that input() is unused and gives the
following warning:
<-- snip -->
...
HOSTCC scripts/kconfig/zconf.tab.o
scripts/kconfig/lex.zconf.c:1628: warning: ‘input’ defined but not used
...
<-- snip -->
Fix it by adding %option noinput to scripts/kconfig/zconf.l and
regeneration of scripts/kconfig/lex.zconf.c_shipped.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next: (25 commits)
setlocalversion: do not describe if there is nothing to describe
kconfig: fix typos: "Suport" -> "Support"
kconfig: make defconfig is no longer chatty
kconfig: make oldconfig is now less chatty
kconfig: speed up all*config + randconfig
kconfig: set all new symbols automatically
kconfig: add diffconfig utility
kbuild: remove Module.markers during mrproper
kbuild: sparse needs CF not CHECKFLAGS
kernel-doc: handle/strip __init
vmlinux.lds: move __attribute__((__cold__)) functions back into final .text section
init: fix URL of "The GNU Accounting Utilities"
kbuild: add arch/$ARCH/include to search path
kbuild: asm symlink support for arch/$ARCH/include
kbuild: support arch/$ARCH/include for tags, cscope
kbuild: prepare headers_* for arch/$ARCH/include
kbuild: install all headers when arch is changed
kbuild: make clean removes *.o.* as well
kbuild: optimize headers_* targets
kbuild: only one call for include/ in make headers_*
...
Jan Engelhardt wrote:
> Just a note that when you run git-describe, you should probably quiten it.
>
> fatal: cannot describe 'bd7364a0fd5a4a2878fe4a224be1b142a4e6698e'
>
> This happens when tags are not present, which can happen if Linus's tree
> is sent upwards again, IOW:
>
> machine1$ git-clone torvalds/linux-2.6.git
> machine1$ git push elsewhere master
>
> machine2$ git-clone elsewhere:/linux
> machine2$ git-describe HEAD
> fatal: cannot describe that
Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Acked-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
make defconfig generated a lot of output
then noone actually read.
Use conf_set_all_new_symbols() to generate the default
configuration and avoid the chatty output.
A typical run now looks like this:
$ make defconfig
*** Default configuration is based on 'i386_defconfig'
arch/x86/configs/i386_defconfig:13:warning: trying to assign nonexistent symbol SEMAPHORE_SLEEPERS
arch/x86/configs/i386_defconfig:176:warning: trying to assign nonexistent symbol PREEMPT_BKL
...
arch/x86/configs/i386_defconfig:1386:warning: trying to assign nonexistent symbol INSTRUMENTATION
$
As an added benefit we now clearly see the warnings generated
in the start of the process.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Previously when running "make oldconfig" we saw all the propmt lines
from kconfig and noone actully read this.
With this patch the user will only see output if there is new symbols.
This will be seen as "make oldconfig" runs which does not generate any output.
A typical run now looks like this:
$ make oldconfig
scripts/kconfig/conf -o arch/x86/Kconfig
$
If a new symbol is found then we restart the config process like this:
$ make oldconfig
scripts/kconfig/conf -o arch/x86/Kconfig
*
* Restart config...
*
*
* General setup
*
Prompt for development and/or incomplete code/drivers (EXPERIMENTAL) [Y/n/?] y
Local version - append to kernel release (LOCALVERSION) []
...
The bahaviour is similar to what we know when running the implicit
oldconfig target "make silentoldconfig".
"make silentoldconfig" are run as part of the kernel build process
if the configuration has changed.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
