* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next: (30 commits)
Use macros for .data.page_aligned section.
Use macros for .bss.page_aligned section.
Use new __init_task_data macro in arch init_task.c files.
kbuild: Don't define ALIGN and ENTRY when preprocessing linker scripts.
arm, cris, mips, sparc, powerpc, um, xtensa: fix build with bash 4.0
kbuild: add static to prototypes
kbuild: fail build if recordmcount.pl fails
kbuild: set -fconserve-stack option for gcc 4.5
kbuild: echo the record_mcount command
gconfig: disable "typeahead find" search in treeviews
kbuild: fix cc1 options check to ensure we do not use -fPIC when compiling
checkincludes.pl: add option to remove duplicates in place
markup_oops: use modinfo to avoid confusion with underscored module names
checkincludes.pl: provide usage helper
checkincludes.pl: close file as soon as we're done with it
ctags: usability fix
kernel hacking: move STRIP_ASM_SYMS from General
gitignore usr/initramfs_data.cpio.bz2 and usr/initramfs_data.cpio.lzma
kbuild: Check if linker supports the -X option
kbuild: introduce ld-option
...
Fix trivial conflict in scripts/basic/fixdep.c
With this patch spi drivers can use standard spi_driver.id_table and
MODULE_DEVICE_TABLE() mechanisms to bind against the devices. Just like
we do with I2C drivers.
This is useful when a single driver supports several variants of devices
but it is not possible to detect them in run-time (like non-JEDEC chips
probing in drivers/mtd/devices/m25p80.c), and when platform_data usage is
overkill.
This patch also makes life a lot easier on OpenFirmware platforms, since
with OF we extensively use proper device IDs in modaliases.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit b478b782e1 "kallsyms, tracing: output
more proper symbol name" introduces a "bugfix" that introduces a segfault
in kallsyms in my configurations.
The cause is the introduction of prefix_underscores_count() which attempts
to count underscores, even in symbols that do not have them. As a result,
it just uselessly runs past the end of the buffer until it crashes:
CC init/version.o
LD init/built-in.o
LD .tmp_vmlinux1
KSYM .tmp_kallsyms1.S
/bin/sh: line 1: 16934 Done sh-linux-gnu-nm -n .tmp_vmlinux1
16935 Segmentation fault | scripts/kallsyms > .tmp_kallsyms1.S
make: *** [.tmp_kallsyms1.S] Error 139
This simplifies the logic and just does a straightforward count.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Paulo Marques <pmarques@grupopie.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: <stable@kernel.org> [2.6.30.x, 2.6.31.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits)
trivial: fix typo in aic7xxx comment
trivial: fix comment typo in drivers/ata/pata_hpt37x.c
trivial: typo in kernel-parameters.txt
trivial: fix typo in tracing documentation
trivial: add __init/__exit macros in drivers/gpio/bt8xxgpio.c
trivial: add __init macro/ fix of __exit macro location in ipmi_poweroff.c
trivial: remove unnecessary semicolons
trivial: Fix duplicated word "options" in comment
trivial: kbuild: remove extraneous blank line after declaration of usage()
trivial: improve help text for mm debug config options
trivial: doc: hpfall: accept disk device to unload as argument
trivial: doc: hpfall: reduce risk that hpfall can do harm
trivial: SubmittingPatches: Fix reference to renumbered step
trivial: fix typos "man[ae]g?ment" -> "management"
trivial: media/video/cx88: add __init/__exit macros to cx88 drivers
trivial: fix typo in CONFIG_DEBUG_FS in gcov doc
trivial: fix missing printk space in amd_k7_smp_check
trivial: fix typo s/ketymap/keymap/ in comment
trivial: fix typo "to to" in multiple files
trivial: fix typos in comments s/DGBU/DBGU/
...
Add checks for Blackfin-specific issues that seem to crop up from time to
time. In particular, we have helper macros to break a 32bit address into
the hi/lo parts, and we want to make sure people use the csync/ssync
variant that includes fun anomaly workarounds.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Limit our type matcher to the s/u/le/be etc sizes that actually exist to
prevent miss categorising s2 as a type. Fix up the spelling of the error
also.
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We should not recommend braces for the following:
#define pr_fmt(fmt) "%s: " fmt, __func__
allow things with double quotes round them to avoid this check.
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Impact:
- More verbose help/usage message.
- Make the option -f an alias for --file.
- On -h, --help, and --version display help message and exit(0).
- With no FILE(s) given, exit(1) with "no input files".
- On invalid options display help/usage and exit(1).
Based on a patch by Pavel Machek.
Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This fixes the sanitation process in checkpatch.pl so that it blocks out
the text after a C99 style comment the same way it does with block style
comments. This prevents the text from getting processed as regular code.
Signed-off-by: Daniel Walker <dwalker@fifo99.com>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
An else cannot start a type, it would have to be within a block after the
else. This can trigger false modifier matching.
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Previous behavior was "bottom-up" in each section from the pattern "F:"
entry that matched. Now information is entered into the various lists in
the "as entered" order for each matched section.
This also allows the F: entry to be put anywhere in a section, not just as
the last entries in the section.
And a couple of improvements:
Don't alphabetically sort before outputting the matched scm, status,
subsystem and web sections.
Ignore content after a single email address so these entries are acceptable
M: name <address> whatever other comment
And a fix:
Make an M: entry without a name again use the name from an immediately
preceding P: line if it exists.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If a person sets a separator, it's only used if --nomultiline is set.
Don't make the command line also include --nomultiline in that case.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add reading and using .mailmap file if it exists
Convert address entries in .mailmap to first encountered address
Don't terminate shell commands with \n
Strip characters found after sign-offs by: name <address> [stripped]
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Added format_email and parse_email routines to reduce inline use.
Added email_address_inuse to eliminate multiple maintainer entries
for the same email address, the first name encountered is used.
Used internal perl equivalents of shell cmd use of grep|cut|sort|uniq
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
--pattern-depth is used to control how many levels of directory traversal
should be performed to find maintainers. default is 0 (all directory levels).
For instance:
MAINTAINERS currently has multiple M: and F: entries that match
net/netfilter/ipvs/ip_vs_app.c
IPVS
M: Wensong Zhang <wensong@linux-vs.org>
M: Simon Horman <horms@verge.net.au>
M: Julian Anastasov <ja@ssi.bg>
[...]
F: net/netfilter/ipvs/
NETFILTER/IPTABLES/IPCHAINS
[...]
M: Patrick McHardy <kaber@trash.net>
[...]
F: net/netfilter/
NETWORKING [GENERAL]
M: "David S. Miller" <davem@davemloft.net>
[...]
F: net/
THE REST
M: Linus Torvalds <torvalds@linux-foundation.org>
[...]
F: */
Using this command will return all of those maintainers:
(except Linus unless --git-chief-maintainers is specified)
$ ./scripts/get_maintainer.pl --nogit -nol \
-f net/netfilter/ipvs/ip_vs_app.c
Julian Anastasov <ja@ssi.bg>
Simon Horman <horms@verge.net.au>
Wensong Zhang <wensong@linux-vs.org>
Patrick McHardy <kaber@trash.net>
David S. Miller <davem@davemloft.net>
Adding --pattern-depth=1 will match at the deepest level
$ ./scripts/get_maintainer.pl --nogit -nol --pattern-depth=1 \
-f net/netfilter/ipvs/ip_vs_app.c
Julian Anastasov <ja@ssi.bg>
Simon Horman <horms@verge.net.au>
Wensong Zhang <wensong@linux-vs.org>
Adding --pattern-depth=2 will match at the deepest level and 1 higher
$ ./scripts/get_maintainer.pl --nogit -nol --pattern-depth=2 \
-f net/netfilter/ipvs/ip_vs_app.c
Julian Anastasov <ja@ssi.bg>
Simon Horman <horms@verge.net.au>
Wensong Zhang <wensong@linux-vs.org>
Patrick McHardy <kaber@trash.net>
and so on.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Before this change, matched sections were added in the order
of appearance in the normally alphabetic section order of
the MAINTAINERS file.
For instance, finding the maintainer for drivers/scsi/wd7000.c
would first find "SCSI SUBSYSTEM", then "WD7000 SCSI SUBSYSTEM",
then "THE REST".
before patch:
$ ./scripts/get_maintainer.pl --nogit -f drivers/scsi/wd7000.c
James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Miroslav Zagorac <zaga@fly.cc.fer.hr>
linux-scsi@vger.kernel.orglinux-kernel@vger.kernel.org
get_maintainer.pl now selects matched sections by longest pattern match.
Longest is the number of "/"s and any specific file pattern.
This changes the example output order of MAINTAINERS to whatever is
selected in "WD7000 SUBSYSTEM", then "SCSI SYSTEM", then "THE REST".
after patch:
$ ./scripts/get_maintainer.pl --nogit -f drivers/scsi/wd7000.c
Miroslav Zagorac <zaga@fly.cc.fer.hr>
James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
linux-scsi@vger.kernel.orglinux-kernel@vger.kernel.org
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Julia Lawall suggested that get_maintainers.pl should have the
ability to include signatories of commits that are modified by
a particular patch.
Vegard Nossum did something similar once.
http://lkml.org/lkml/2008/5/29/449
The modified script looks the commits for all lines in the
patch, and includes the "-by:" signatories for those commits.
It uses the same git-min-percent, git-max-maintainers, and
git-min-signatures options. git-since is ignored.
It can be used independently from the --git default, so
./scripts/get_maintainers.pl --nogit --git-blame <patch>
or
./scripts/get_maintainers.pl --nogit --git-blame -f <file>
is acceptable.
If used with -f <file>, all lines/commits for the file are
checked.
--git-blame can be slow if used with -f <file>
--git-blame does not work with -f <directory>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
