Compute the IPC and the basic block cycles for the annotate display.
IPC is computed by counting the instructions, and then dividing the
accounted cycles by that count.
The actual IPC computation can only be done at annotate time, because we
need to parse the objdump output first to know the number of
instructions in the basic block.
The cycles/IPC are also put into the perf function annotation so that
the display code can show them.
Again basic block overlaps are not handled, with the longest winning,
but there are some heuristics to hide the IPC when the longest is not
the most common.
v2: Compute IPC correctly.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1437233094-12844-6-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This adds the basic infrastructure to keep track of cycle counts per
basic block for annotate. We allocate an array similar to the normal
accounting, and then account branch cycles there.
We handle two cases:
cycles per basic block with start and cycles per branch (these are later
used for either IPC or just cycles per BB)
In the start case we cannot handle overlaps, so always the longest basic
block wins.
For the cycles per branch case everything is accurately accounted.
v2: Remove unnecessary checks. Slight restructure. Move
symbol__get_annotation to another patch. Move histogram allocation.
v3: Merged with current tree
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1437233094-12844-4-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the symbol structure is allocated with symbol_conf.priv_size
to carry sideband information like annotation, map browser on TUI and
sort-by-name tree node. So retrieving these information from symbol
needs to care about the details of such placement.
However the annotation code just assumes that the symbol is placed after
the struct annotation. But actually there's other info between them.
So accessing those struct will lead to an undefined behavior (usually a
crash) after they write their info to the same location.
To reproduce the problem, please follow the steps below:
1. run perf report (TUI of course) with -v option
2. open map browser (by pressing right arrow key for any entry)
3. search any function (by pressing '/' key and input whatever..)
4. return to the hist browser (by pressing 'q' or left arrow key)
5. open annotation window for the same entry (by pressing 'a' key)
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1421234288-22758-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With srcline key/sort'ing it's useful to have line numbers in the
annotate window. This patch implements this.
Use objdump -l to request the line numbers and save them in the line
structure. Then the browser displays them for source lines.
The line numbers are not displayed by default, but can be toggled on
with 'k'
There is one unfortunate problem with this setup. For lines not
containing source and which are outside functions objdump -l reports
line numbers off by a few: it always reports the first line number in
the next function even for lines that are outside the function.
I haven't found a nice way to detect/correct this. Probably objdump has
to be fixed.
See https://sourceware.org/bugzilla/show_bug.cgi?id=16433
The line numbers are still useful even with these problems, as most are
correct and the ones which are not are nearby.
v2: Fix help text. Handle (discriminator...) output in objdump.
Left align the line numbers.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1415844328-4884-9-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The TUI of perf report and top support annotation, but stdio and GTK
don't. So it should be checked before calling hist_entry__inc_addr_
samples() to avoid wasting resources that will never be used.
perf annotate need it regardless of UI and sort keys, so the check
of whether to allocate resources should be on the tools that have
annotate as an option in the TUI, 'report' and 'top', not on the
function called by all of them.
It caused perf annotate on ppc64 to produce zero output, since the
buckets were not being allocated.
Reported-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1392859976-32760-1-git-send-email-namhyung@kernel.org
[ Renamed (report,top)__needs_annotate() to ui__has_annotation() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Dynamically allocate source_line_percent according to a number of group
members and save nr_pcnt to the struct source_line. This way we can
handle multiple events in a general manner.
However since the size of struct source_line is not fixed anymore,
iterating whole source_line should care about its size.
$ perf annotate --group --stdio --print-line
Sorted summary for file /lib/ld-2.11.1.so
----------------------------------------------
33.33 0.00 /build/buildd/eglibc-2.11.1/elf/rtld.c:381
33.33 0.00 /build/buildd/eglibc-2.11.1/elf/dynamic-link.h:128
33.33 0.00 /build/buildd/eglibc-2.11.1/elf/do-rel.h:105
0.00 75.00 /build/buildd/eglibc-2.11.1/elf/dynamic-link.h:137
0.00 25.00 /build/buildd/eglibc-2.11.1/elf/dynamic-link.h:187
...
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1362462812-30885-9-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The --print-line option of perf annotate command shows summary for
each source line. But it didn't merge same lines so that it can
appear multiple times.
* before:
Sorted summary for file /home/namhyung/bin/mcol
----------------------------------------------
21.71 /home/namhyung/tmp/mcol.c:26
20.66 /home/namhyung/tmp/mcol.c:25
9.53 /home/namhyung/tmp/mcol.c:24
7.68 /home/namhyung/tmp/mcol.c:25
7.67 /home/namhyung/tmp/mcol.c:25
7.66 /home/namhyung/tmp/mcol.c:26
7.49 /home/namhyung/tmp/mcol.c:26
6.92 /home/namhyung/tmp/mcol.c:25
6.81 /home/namhyung/tmp/mcol.c:25
1.07 /home/namhyung/tmp/mcol.c:26
0.52 /home/namhyung/tmp/mcol.c:25
0.51 /home/namhyung/tmp/mcol.c:25
0.51 /home/namhyung/tmp/mcol.c:24
* after:
Sorted summary for file /home/namhyung/bin/mcol
----------------------------------------------
50.77 /home/namhyung/tmp/mcol.c:25
37.94 /home/namhyung/tmp/mcol.c:26
10.04 /home/namhyung/tmp/mcol.c:24
To do that, introduce percent_sum field so that the normal
line-by-line output doesn't get changed.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1352440729-21848-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf defines both __used and __unused variables to use for marking
unused variables. The variable __used is defined to
__attribute__((__unused__)), which contradicts the kernel definition to
__attribute__((__used__)) for new gcc versions. On Android, __used is
also defined in system headers and this leads to warnings like: warning:
'__used__' attribute ignored
__unused is not defined in the kernel and is not a standard definition.
If __unused is included everywhere instead of __used, this leads to
conflicts with glibc headers, since glibc has a variables with this name
in its headers.
The best approach is to use __maybe_unused, the definition used in the
kernel for __attribute__((unused)). In this way there is only one
definition in perf sources (instead of 2 definitions that point to the
same thing: __used and __unused) and it works on both Linux and Android.
This patch simply replaces all instances of __used and __unused with
__maybe_unused.
Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1347315303-29906-7-git-send-email-irina.tirdea@intel.com
[ committer note: fixed up conflict with a116e05 in builtin-sched.c ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
