This is to get the USB fixes that were merged in the 3.5-rc4 tree into usb-next
so that everyone can sync up properly.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the environment variable LOCALMODCONFIG_DEBUG is set, then debug output
will appear in the make localmodconfig. This will simplify debugging what
people get with their output, as I can just tell people to do:
LOCALMODCONFIG_DEBUG=1 make localmodconfig 2>out.txt
and have them send me the out.txt. I'll be able to see why things are not
working as they think it should be.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There are some cases that a required module does not have a prompt
and needs to have another module enabled that selects it to be set.
As localmodconfig is conservative and tries to make the minimum config
without breaking the user's kernel, or keeping the user from using
devices that were loaded when the lsmod was done, all modules that
select this module will also be enabled.
If you needed module A, but module A did not have a prompt but needed
module B to be selected, localmodconfig would make sure B was still
enabled. If not only B selected A, but C, D, E, F, and G also
selected A, then all of those would also be included, as well as the
modules they depend on. This ballooned the number of configs that
localmodconfig would keep.
The fix here is to process the depends first, and then record those
configs that did not have a prompt and needed to be selected.
After the depends are done, check what configs are needed to select
the configs in the list, and if a config that selects it is already
set, then we don't need to do anything else.
If no config that selects the config is set, then just pick one and
try again.
This change brought down the number of selected modules from 290
to 67! Both before and after were run against a config that had 3095
modules enabled.
Tested-by: John David Yost <johnyost@ptd.net> # AlleyTrotter
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Read in the entire config file. If there's a config that we depend on
that happens to be in the core set (not a module) then we do not need
to process it as a module.
Currently, we follow the entire depend and selects even if they
are enabled as core and not modules. By checking to make sure that we
only look at modules we can drop the count a little.
From one of my tests, localmodconfig went from taking 3095 set modules
down to 356 before this patch, and down to 290 modules after the change.
Tested-by: John David Yost <johnyost@ptd.net> # AlleyTrotter
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Added some more comments and cleaned up part of the the code to use
a named variable instead of one of the special $1 perl variables.
No functional changes.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Functions used for PCI fixups (like DECLARE_PCI_FIXUP_HEADER) are often
marked __init. This is okay as long as nobody is using PCI hotplug.
However if one does execute
| echo 1 > /sys/bus/pci/rescan
and we hit a module which is marked __init istead of __devinit then we
go boom because the code is removed after the kernel booted. This patch
help to see those section mismatches.
Cc: Michal Marek <mmarek@suse.cz>
Cc: linux-kbuild@vger.kernel.org
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Some composite USB devices provide multiple interfaces
with different functions, all using "vendor-specific"
for class/subclass/protocol. Another OS use interface
numbers to match the driver and interface. It seems
these devices are designed with that in mind - using
static interface numbers for the different functions.
This adds support for matching against the
bInterfaceNumber, allowing such devices to be supported
without having to resort to testing against interface
number whitelists and/or blacklists in the probe.
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Requires --strict option during invocation:
~/linux$ scripts/checkpatch --strict foo.patch
This tests for a bad habits of mine like this:
return 0 ;
Note that it does allow a special case of a bare semicolon
for empty loops:
while (foo())
;
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull misc kbuild changes from Michal Marek:
"The non-critical part of kbuild for 3.5 includes
- two new coccinelle checks
- fix for make deb-pkg to include generated headers in arch/*/include
I have more make-deb-pkg fixes in the backlog, but these will likely
have to wait for 3.6."
* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
builddeb: include autogenerated header files
scripts/coccinelle: sizeof of pointer
scripts/coccinelle: address test is always true
Pull kconfig changes from Michal Marek:
- Error handling for make KCONFIG_ALLCONFIG=<...> all*config plus a fix
for a bug that was exposed by this
- Fix for the script/config utility.
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
scripts/config: properly report and set string options
kbuild: all{no,yes,mod,def,rand}config only read files when instructed to.
kconfig: Add error handling to KCONFIG_ALLCONFIG
Pull kbuild updates from Michal Marek.
Fixed up nontrivial merge conflict in Makefile as per Stephen Rothwell
and linux-next (and trivial arch/sparc/Makefile changes due to removed
sparc32 logic).
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
mips: Fix KBUILD_CPPFLAGS definition
kbuild: fix ia64 link
kbuild: document KBUILD_LDS, KBUILD_VMLINUX_{INIT,MAIN} and LDFLAGS_vmlinux
kbuild: link of vmlinux moved to a script
kbuild: refactor final link of sparc32
kbuild: drop unused KBUILD_VMLINUX_OBJS from top-level Makefile
kbuild: Makefile: remove unnecessary check for m68knommu ARCH
After 303395ac3b, some headers are
autogenerated. Include these autogenerated headers (mainly
unistd_32_ia32.h) in out-of-tree builds to allow DKMS modules to be
built succesfully.
Signed-off-by: Peter Lekensteyn <lekensteyn@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Pull module patches from Rusty Russell, who really sells them:
"Three trivial patches of no real utility. Modules are boring."
But to make things slightly more exciting, he adds:
"Fortunately David Howells is looking to change this, with his module
signing patchset. But that's for next merge window...
Cheers,
Rusty."
* tag 'module-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
Guard check in module loader against integer overflow
modpost: use proper kernel style for autogenerated files
modpost: Stop grab_file() from leaking filedescriptors if fstat() fails
Pull the MCA deletion branch from Paul Gortmaker:
"It was good that we could support MCA machines back in the day, but
realistically, nobody is using them anymore. They were mostly limited
to 386-sx 16MHz CPU and some 486 class machines and never more than
64MB of RAM. Even the enthusiast hobbyist community seems to have
dried up close to ten years ago, based on what you can find searching
various websites dedicated to the relatively short lived hardware.
So lets remove the support relating to CONFIG_MCA. There is no point
carrying this forward, wasting cycles doing routine maintenance on it;
wasting allyesconfig build time on validating it, wasting I/O on git
grep'ping over it, and so on."
Let's see if anybody screams. It generally has compiled, and James
Bottomley pointed out that there was a MCA extension from NCR that
allowed for up to 4GB of memory and PPro-class machines. So in *theory*
there may be users out there.
But even James (technically listed as a maintainer) doesn't actually
have a system, and while Alan Cox claims to have a machine in his cellar
that he offered to anybody who wants to take it off his hands, he didn't
argue for keeping MCA support either.
So we could bring it back. But somebody had better speak up and talk
about how they have actually been using said MCA hardware with modern
kernels for us to do that. And David already took the patch to delete
all the networking driver code (commit a5e371f61a: "drivers/net:
delete all code/drivers depending on CONFIG_MCA").
* 'delete-mca' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
MCA: delete all remaining traces of microchannel bus support.
scsi: delete the MCA specific drivers and driver code
serial: delete the MCA specific 8250 support.
arm: remove ability to select CONFIG_MCA
Pull exception table generation updates from Ingo Molnar:
"The biggest change here is to allow the build-time sorting of the
exception table, to speed up booting. This is achieved by the
architecture enabling BUILDTIME_EXTABLE_SORT. This option is enabled
for x86 and MIPS currently.
On x86 a number of fixes and changes were needed to allow build-time
sorting of the exception table, in particular a relocation invariant
exception table format was needed. This required the abstracting out
of exception table protocol and the removal of 20 years of accumulated
assumptions about the x86 exception table format.
While at it, this tree also cleans up various other aspects of
exception handling, such as early(er) exception handling for
rdmsr_safe() et al.
All in one, as the result of these changes the x86 exception code is
now pretty nice and modern. As an added bonus any regressions in this
code will be early and violent crashes, so if you see any of those,
you'll know whom to blame!"
Fix up trivial conflicts in arch/{mips,x86}/Kconfig files due to nearby
modifications of other core architecture options.
* 'x86-extable-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (35 commits)
Revert "x86, extable: Disable presorted exception table for now"
scripts/sortextable: Handle relative entries, and other cleanups
x86, extable: Switch to relative exception table entries
x86, extable: Disable presorted exception table for now
x86, extable: Add _ASM_EXTABLE_EX() macro
x86, extable: Remove open-coded exception table entries in arch/x86/ia32/ia32entry.S
x86, extable: Remove open-coded exception table entries in arch/x86/include/asm/xsave.h
x86, extable: Remove open-coded exception table entries in arch/x86/include/asm/kvm_host.h
x86, extable: Remove the now-unused __ASM_EX_SEC macros
x86, extable: Remove open-coded exception table entries in arch/x86/xen/xen-asm_32.S
x86, extable: Remove open-coded exception table entries in arch/x86/um/checksum_32.S
x86, extable: Remove open-coded exception table entries in arch/x86/lib/usercopy_32.c
x86, extable: Remove open-coded exception table entries in arch/x86/lib/putuser.S
x86, extable: Remove open-coded exception table entries in arch/x86/lib/getuser.S
x86, extable: Remove open-coded exception table entries in arch/x86/lib/csum-copy_64.S
x86, extable: Remove open-coded exception table entries in arch/x86/lib/copy_user_nocache_64.S
x86, extable: Remove open-coded exception table entries in arch/x86/lib/copy_user_64.S
x86, extable: Remove open-coded exception table entries in arch/x86/lib/checksum_32.S
x86, extable: Remove open-coded exception table entries in arch/x86/kernel/test_rodata.c
x86, extable: Remove open-coded exception table entries in arch/x86/kernel/entry_64.S
...
In case the open() call succeeds but the subsequent fstat() call
fails, then we'll return without close()'ing the filedescriptor.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Pull HID subsystem updates from Jiri Kosina:
"Apart from various driver updates and added support for a number of
new devices (mostly multitouch ones, but not limited to), there is one
change that is worth pointing out explicitly: creation of HID device
groups and proper autoloading of hid-multitouch, implemented by Henrik
Rydberg."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (50 commits)
HID: wacom: fix build breakage without CONFIG_LEDS_CLASS
HID: waltop: Extend barrel button fix
HID: hyperv: Set the hid drvdata correctly
HID: wacom: Unify speed setting
HID: wacom: Add speed setting for Intuos4 WL
HID: wacom: Move Graphire raport header check.
HID: uclogic: Add support for UC-Logic TWHL850
HID: explain the signed/unsigned handling in hid_add_field()
HID: handle logical min/max signedness properly in parser
HID: logitech: read all 32 bits of report type bitfield
HID: wacom: Add LED selector control for Wacom Intuos4 WL
HID: hid-multitouch: fix wrong protocol detection
HID: wiimote: Fix IR data parser
HID: wacom: Add tilt reporting for Intuos4 WL
HID: multitouch: MT interface matching for Baanto
HID: hid-multitouch: Only match MT interfaces
HID: Create a common generic driver
HID: hid-multitouch: Switch to device groups
HID: Create a generic device group
HID: Allow bus wildcard matching
...
A new option is added to the relocs tool called '--realmode'.
This option causes the generation of 16-bit segment relocations
and 32-bit linear relocations for the real-mode code. When
the real-mode code is moved to the low-memory during kernel
initialization, these relocation entries can be used to
relocate the code properly.
In the assembly code 16-bit segment relocations must be relative
to the 'real_mode_seg' absolute symbol. Linear relocations must be
relative to a symbol prefixed with 'pa_'.
16-bit segment relocation is used to load cs:ip in 16-bit code.
Linear relocations are used in the 32-bit code for relocatable
data references. They are declared in the linker script of the
real-mode code.
The relocs tool is moved to arch/x86/tools/relocs.c, and added new
target archscripts that can be used to build scripts needed building
an architecture. be compiled before building the arch/x86 tree.
[ hpa: accelerating this because it detects invalid absolute
relocations, a serious bug in binutils 2.22.52.0.x which currently
produces bad kernels. ]
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/r/1336501366-28617-2-git-send-email-jarkko.sakkinen@intel.com
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: <stable@vger.kernel.org>
Hardware with MCA bus is limited to 386 and 486 class machines
that are now 20+ years old and typically with less than 32MB
of memory. A quick search on the internet, and you see that
even the MCA hobbyist/enthusiast community has lost interest
in the early 2000 era and never really even moved ahead from
the 2.4 kernels to the 2.6 series.
This deletes anything remaining related to CONFIG_MCA from core
kernel code and from the x86 architecture. There is no point in
carrying this any further into the future.
One complication to watch for is inadvertently scooping up
stuff relating to machine check, since there is overlap in
the TLA name space (e.g. arch/x86/boot/mca.c).
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: x86@kernel.org
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Currently, scripts/config removes the leading double-quote from
string options, but leaves the trailing double-quote.
Also, double-quotes in a string are escaped, but scripts/config
does not unescape those when printing
Finally, scripts/config does not escape double-quotes when setting
string options.
Eg. the current behavior:
$ grep -E '^CONFIG_FOO=' .config
CONFIG_FOO="Bar \"Buz\" Meh"
$ ./scripts/config -s FOO
Bar \"Buz\" Meh"
$ ./scripts/config --set-str FOO 'Alpha "Bravo" Charlie'
$ grep -E '^CONFIG_FOO=' .config
CONFIG_FOO="Alpha "Bravo" Charlie"
Fix those three, giving this new behavior:
$ grep -E '^CONFIG_FOO=' .config
CONFIG_FOO="Bar \"Buz\" Meh"
$ ./scripts/config -s FOO
Bar "Buz" Meh
$ ./scripts/config --set-str FOO 'Alpha "Bravo" Charlie'
$ grep -E '^CONFIG_FOO=' .config
CONFIG_FOO="Alpha \"Bravo\" Charlie"
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
