Currently new system call kexec_file_load() and all the associated code
compiles if CONFIG_KEXEC=y. But new syscall also compiles purgatory
code which currently uses gcc option -mcmodel=large. This option seems
to be available only gcc 4.4 onwards.
Hiding new functionality behind a new config option will not break
existing users of old gcc. Those who wish to enable new functionality
will require new gcc. Having said that, I am trying to figure out how
can I move away from using -mcmodel=large but that can take a while.
I think there are other advantages of introducing this new config
option. As this option will be enabled only on x86_64, other arches
don't have to compile generic kexec code which will never be used. This
new code selects CRYPTO=y and CRYPTO_SHA256=y. And all other arches had
to do this for CONFIG_KEXEC. Now with introduction of new config
option, we can remove crypto dependency from other arches.
Now CONFIG_KEXEC_FILE is available only on x86_64. So whereever I had
CONFIG_X86_64 defined, I got rid of that.
For CONFIG_KEXEC_FILE, instead of doing select CRYPTO=y, I changed it to
"depends on CRYPTO=y". This should be safer as "select" is not
recursive.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Tested-by: Shaun Ruffell <sruffell@digium.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Richard and Daniel reported that UML is broken due to changes to
resource traversal functions. Problem is that iomem_resource.child can
be null and new code does not consider that possibility. Old code used
a for loop and that loop will not even execute if p was null.
Revert back to for() loop logic and bail out if p is null.
I also moved sibling_only check out of resource_lock. There is no
reason to keep it inside the lock.
Following is backtrace of the UML crash.
RIP: 0033:[<0000000060039b9f>]
RSP: 0000000081459da0 EFLAGS: 00010202
RAX: 0000000000000000 RBX: 00000000219b3fff RCX: 000000006010d1d9
RDX: 0000000000000001 RSI: 00000000602dfb94 RDI: 0000000081459df8
RBP: 0000000081459de0 R08: 00000000601b59f4 R09: ffffffff0000ff00
R10: ffffffff0000ff00 R11: 0000000081459e88 R12: 0000000081459df8
R13: 00000000219b3fff R14: 00000000602dfb94 R15: 0000000000000000
Kernel panic - not syncing: Segfault with no mm
CPU: 0 PID: 1 Comm: swapper Not tainted 3.16.0-10454-g58d08e3 #13
Stack:
00000000 000080d0 81459df0 219b3fff
81459e70 6010d1d9 ffffffff 6033e010
81459e50 6003a269 81459e30 00000000
Call Trace:
[<6010d1d9>] ? kclist_add_private+0x0/0xe7
[<6003a269>] walk_system_ram_range+0x61/0xb7
[<6000e859>] ? proc_kcore_init+0x0/0xf1
[<6010d574>] kcore_update_ram+0x4c/0x168
[<6010d72e>] ? kclist_add+0x0/0x2e
[<6000e943>] proc_kcore_init+0xea/0xf1
[<6000e859>] ? proc_kcore_init+0x0/0xf1
[<6000e859>] ? proc_kcore_init+0x0/0xf1
[<600189f0>] do_one_initcall+0x13c/0x204
[<6004ca46>] ? parse_args+0x1df/0x2e0
[<6004c82d>] ? parameq+0x0/0x3a
[<601b5990>] ? strcpy+0x0/0x18
[<60001e1a>] kernel_init_freeable+0x240/0x31e
[<6026f1c0>] kernel_init+0x12/0x148
[<60019fad>] new_thread_handler+0x81/0xa3
Fixes 8c86e70ace ("resource: provide new functions to walk
through resources").
Reported-by: Daniel Walter <sahne@0x90.at>
Tested-by: Richard Weinberger <richard@nod.at>
Tested-by: Toralf Förster <toralf.foerster@gmx.de>
Tested-by: Daniel Walter <sahne@0x90.at>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It should be request_threaded_irq, not request_irq
[jkosina@suse.cz: not that it would matter, as both have the same
set of arguments anyway, but for sake of consistency ...]
Signed-off-by: Emilio López <emilio@elopez.com.ar>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The nocb callbacks generated before the nocb kthreads are spawned are
enqueued in the nocb queue for later processing. Commit fbce7497ee ("rcu:
Parallelize and economize NOCB kthread wakeups") introduced nocb leader kthreads
which checked the nocb_leader_wake flag to see if there were any such pending
callbacks. A case was reported in which newly spawned leader kthreads were not
processing the pending callbacks as this flag was not set, which led to a boot
hang.
The following commit ensures that the newly spawned nocb kthreads process the
pending callbacks by allowing the kthreads to run immediately after spawning
instead of waiting. This is done by inverting the logic of nocb_leader_wake
tests to nocb_leader_sleep which allows us to use the default initialization of
this flag to 0 to let the kthreads run.
Reported-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Link: http://www.spinics.net/lists/kernel/msg1802899.html
[ paulmck: Backported to v3.17-rc2. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Amit Shah <amit.shah@redhat.com>
__get_cpu_var can paper over differences in the definitions of
cpumask_var_t and either use the address of the cpumask variable
directly or perform a fetch of the address of the struct cpumask
allocated elsewhere. This is important particularly when using per cpu
cpumask_var_t declarations because in one case we have an offset into
a per cpu area to handle and in the other case we need to fetch a
pointer from the offset.
This patch introduces a new macro
this_cpu_cpumask_var_ptr()
that is defined where cpumask_var_t is defined and performs the proper
actions. All use cases where __get_cpu_var is used with cpumask_var_t
are converted to the use of this_cpu_cpumask_var_ptr().
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull trace buffer epoll hang fix from Steven Rostedt:
"Josef Bacik found a bug in the ring_buffer_poll_wait() where the
condition variable (waiters_pending) was set before being added to the
poll queue via poll_wait(). This allowed for a small race window to
happen where an event could come in, check the condition variable see
it set to true, clear it, and then wake all the waiters. But because
the waiter set the variable before adding itself to the queue, the
waker could have cleared the variable after it was set and then miss
waking it up as it wasn't added to the queue yet.
Discussing this bug, we realized that a memory barrier needed to be
added too, for the rare case that something polls for a single trace
event to happen (and just one, no more to come in), and miss the
wakeup due to memory ordering. Ideally, a memory barrier needs to be
added on the writer side too, but as that will kill tracing
performance and this is for a situation that tracing wasn't even
designed for (who traces one instance of an event, use a printk
instead!), this isn't worth adding the barrier. But we can in the
future add the barrier for when the buffer goes from empty to the
first event, as that would cover this case"
* tag 'trace-fixes-v3.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
trace: Fix epoll hang when we race with new entries
Pull nohz fixes from Frederic Weisbecker:
" The tick reschedules itself unconditionally. It's relevant in periodic
mode but not in dynticks mode where it results in spurious double clock
writes and even spurious periodic behaviour for low-res case.
This set fixes that:
* 1st patch removes low-res periodic tick rescheduling in nohz mode.
This fixes spurious periodic behaviour.
* 2nd patch does the same for high-res mode. Here there is no such
spurious periodic behaviour but it still spares a double clock write
in some cases. "
Signed-off-by: Ingo Molnar <mingo@kernel.org>
[ARM specific]
These are generally replaced with raw_cpu_ptr. However, in
gic_get_percpu_base() we immediately dereference the pointer. This is
equivalent to a raw_cpu_read. So use that operation there.
Cc: nicolas.pitre@linaro.org
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Most of these are the uses of &__raw_get_cpu_var for address calculation.
touch_softlockup_watchdog_sync() uses __raw_get_cpu_var to write to
per cpu variables. Use __this_cpu_write instead.
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: linux-watchdog@vger.kernel.org
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Convert all uses of __get_cpu_var for address calculation to use
this_cpu_ptr instead.
[Uses of __get_cpu_var with cpumask_var_t are no longer
handled by this patch]
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Convert uses of __get_cpu_var for creating a address from a percpu
offset to this_cpu_ptr.
The two cases where get_cpu_var is used to actually access a percpu
variable are changed to use this_cpu_read/raw_cpu_read.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Epoll on trace_pipe can sometimes hang in a weird case. If the ring buffer is
empty when we set waiters_pending but an event shows up exactly at that moment
we can miss being woken up by the ring buffers irq work. Since
ring_buffer_empty() is inherently racey we will sometimes think that the buffer
is not empty. So we don't get woken up and we don't think there are any events
even though there were some ready when we added the watch, which makes us hang.
This patch fixes this by making sure that we are actually on the wait list
before we set waiters_pending, and add a memory barrier to make sure
ring_buffer_empty() is going to be correct.
Link: http://lkml.kernel.org/p/1408989581-23727-1-git-send-email-jbacik@fb.com
Cc: stable@vger.kernel.org # 3.10+
Cc: Martin Lau <kafai@fb.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In order to make is_kdump_kernel() accessible from modules, need to
make elfcorehdr_addr exported.
This was rejected in the past [1] because reset_devices was prefered in
that context (reseting the device in kdump kernel), but now there are
some network drivers that need to reduce memory usage when loaded from
a kdump kernel. And in that context, is_kdump_kernel() suits better.
[1] - https://lkml.org/lkml/2011/1/27/341
CC: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull fix for ftrace function tracer/profiler conflict from Steven Rostedt:
"The rewrite of the ftrace code that makes it possible to allow for
separate trampolines had a design flaw with the interaction between
the function and function_graph tracers.
The main flaw was the simplification of the use of multiple tracers
having the same filter (like function and function_graph, that use the
set_ftrace_filter file to filter their code). The design assumed that
the two tracers could never run simultaneously as only one tracer can
be used at a time. The problem with this assumption was that the
function profiler could be implemented on top of the function graph
tracer, and the function profiler could run at the same time as the
function tracer. This caused the assumption to be broken and when
ftrace detected this failed assumpiton it would spit out a nasty
warning and shut itself down.
Instead of using a single ftrace_ops that switches between the
function and function_graph callbacks, the two tracers can again use
their own ftrace_ops. But instead of having a complex hierarchy of
ftrace_ops, the filter fields are placed in its own structure and the
ftrace_ops can carefully use the same filter. This change took a bit
to be able to allow for this and currently only the global_ops can
share the same filter, but this new design can easily be modified to
allow for any ftrace_ops to share its filter with another ftrace_ops.
The first four patches deal with the change of allowing the ftrace_ops
to share the filter (and this needs to go to 3.16 as well).
The fifth patch fixes a bug that was also caused by the new changes
but only for archs other than x86, and only if those archs implement a
direct call to the function_graph tracer which they do not do yet but
will in the future. It does not need to go to stable, but needs to be
fixed before the other archs update their code to allow direct calls
to the function_graph trampoline"
* tag 'trace-fixes-v3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Use current addr when converting to nop in __ftrace_replace_code()
ftrace: Fix function_profiler and function tracer together
ftrace: Fix up trampoline accounting with looping on hash ops
ftrace: Update all ftrace_ops for a ftrace_hash_ops update
ftrace: Allow ftrace_ops to use the hashes from other ops
There is no function named cgroup_enable_task_cg_links().
Instead, the correct function name in this comment should
be cgroup_enabled_task_cg_lists().
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This function will help an async task processing batched jobs from
workqueue decide if it wants to keep processing on more chunks of batched
work that can be delayed, or to accumulate more work for more efficient
batched processing later.
If no other tasks are running on the cpu, the batching process can take
advantgae of the available cpu cycles to a make decision to continue
processing the existing accumulated work to minimize delay,
otherwise it will yield.
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull perf fixes from Ingo Molnar:
"A kprobes and a perf compat ioctl fix"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Handle compat ioctl
kprobes: Skip kretprobe hit in NMI context to avoid deadlock
