The translation from the X driver to the KMS one typo'ed a couple
of array indices, causing the HW cursor to look weird (blocky with
leaking edge colors). This fixes it.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
fixups for nouveau and fencing
* 'for-airlied-next' of git://people.freedesktop.org/~mlankhorst/linux:
drm/nouveau: export reservation_object from dmabuf to ttm
drm/ttm: add reservation_object as argument to ttm_bo_init
drm: Pass dma-buf as argument to gem_prime_import_sg_table
drm/nouveau: assign fence_chan->name correctly
drm/nouveau: specify if interruptible wait is desired in nouveau_fence_sync
drm/nouveau: bump driver patchlevel to 1.2.1
Use container_of instead of casting first structure member.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Pull in first set of changes from Ben for ast on ppc.
I've done a quick boot test on x86 and it still seems to boot.
* 'drm-next-ast-fixes' of ssh://people.freedesktop.org/~/linux:
drm/ast: Cleanup analog init code path
drm/ast: Don't assume DVO enabled means SIL164 on uninitialized chips
drm/ast: Properly initialize P2A base before using it in ast_init_3rdtx()
drm/ast: POST chip at probe time if VGA not enabled
drm/ast: Try to use MMIO registers when PIO isn't supported
Move the MMIO mangling to a separate routine and actually
disable the DVO output when using pure analog.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
It looks like the AST2400 comes up with the DVO enable bit set,
which causes us to incorrectly assume we have a SIL164 regardless
of the value of the scratch registers setup by the BMC firmware.
So let's limit that test to the case where the chip has already
been setup by a BIOS.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
If the P2A has been used to target other SOC registers before that
call, we're going to hit the wrong place so make sure we set the
base address up properly before using it.
(P2A stands for PCIe to AHB bridge and is the bride that allows
accessing the AST's internal AHB bus using a relocatable 64k
window in the second half of the PCIe MMIO BAR)
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
We need to do it on machines without a BIOS such as POWER8. Also
for detection to work without triggering PCIe errors, we need
to enable VGA early on, inside ast_detect_chip().
While touching those files, replace a few hard coded register
numbers with the corresponding symbolic constant.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
If the PIO resources haven't been assigned, then we have no choice
but try to use the MMIO version. This is the case for example on
POWER8 which doesn't support PIO at all.
Chips rev 0x20 or later have MMIO decoding enabled by default.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This fixes problems on ppc64 platforms, where we could end up using
a WC mapping for migrating BOs with memcpy, when really we want to
use cached memory.
Tested-by: Ben Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
One step closer to dropping all the drm_bus_* code:
Add a driver->set_busid() callback and make all drivers use the generic
helpers. Nouveau is the only driver that uses two different bus-types with
the same drm_driver. This is totally broken if both buses are available on
the same machine (unlikely, but lets be safe). Therefore, we create two
different drivers for each platform during module_init() and set the
set_busid() callback respectively.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This allows us to more fine grained specify where to place the buffer object.
v2: rebased on drm-next, add bochs changes as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to
meet kernel coding style guidelines. This issue was reported by checkpatch.
A simplified version of the semantic patch that makes this change is as
follows (http://coccinelle.lip6.fr/):
// <smpl>
@@
identifier i;
declarer name DEFINE_PCI_DEVICE_TABLE;
initializer z;
@@
- DEFINE_PCI_DEVICE_TABLE(i)
+ const struct pci_device_id i[]
= z;
// </smpl>
[bhelgaas: add semantic patch]
Signed-off-by: Benoit Taine <benoit.taine@lip6.fr>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The final parameter to ttm_bo_reserve() is a pointer, therefore callers
should use NULL instead of 0.
Fixes a bunch of sparse warnings of this type:
warning: Using plain integer as NULL pointer
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
To implement hotplug detection in a race-free manner, drivers must call
drm_kms_helper_poll_init() before hotplug events can be triggered. Such
events can be triggered right after any of the encoders or connectors
are initialized. At the same time, if the drm_fb_helper_hotplug_event()
helper is used by a driver, then the poll helper requires some parts of
the FB helper to be initialized to prevent a crash.
At the same time, drm_fb_helper_init() requires information that is not
necessarily available at such an early stage (number of CRTCs and
connectors), so it cannot be used yet.
Add a new helper, drm_fb_helper_prepare(), that initializes the bare
minimum needed to allow drm_kms_helper_poll_init() to execute and any
subsequent hotplug events to be processed properly.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
