Remove the runtime BUG_ON and change to a compile-time check in
the macro that calls the hex format routine
[Noticed by Joe Perches]
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix the output of ftrace in hex mode as the hi/lo nibbles are output in
reverse order. Without this patch, the output of ftrace is:
raw mode : 6474 0 141531612444 0 140 + 6402 120 S
hex mode : 000091a4 00000000 000000023f1f50c1 00000000 c8 000000b2 00009120 87 ffff00c8 00000035
There is an inversion on ouput hex(6474) is 194a
[based on a patch by Philippe Reynes <tremyfr@yahoo.fr>]
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When printing nanoseconds, the right printk format string is %09 not %06...
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Frédéric Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When one try to set a nonexistent tracer, no error is returned
as if the name of the tracer was correct.
We should return -EINVAL.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Now that the ring buffer is reentrant, some of the ftrace tracers
(sched_swich, debugging traces) can also be reentrant.
Note: Never make the function tracer reentrant, that can cause
recursion problems all over the kernel. The function tracer
must disable reentrancy.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch replaces the local_irq_save/restore with preempt_disable/
enable. This allows for interrupts to enter while recording.
To write to the ring buffer, you must reserve data, and then
commit it. During this time, an interrupt may call a trace function
that will also record into the buffer before the commit is made.
The interrupt will reserve its entry after the first entry, even
though the first entry did not finish yet.
The time stamp delta of the interrupt entry will be zero, since
in the view of the trace, the interrupt happened during the
first field anyway.
Locking still takes place when the tail/write moves from one page
to the next. The reader always takes the locks.
A new page pointer is added, called the commit. The write/tail will
always point to the end of all entries. The commit field will
point to the last committed entry. Only this commit entry may
update the write time stamp.
The reader can only go up to the commit. It cannot go past it.
If a lot of interrupts come in during a commit that fills up the
buffer, and it happens to make it all the way around the buffer
back to the commit, then a warning is printed and new events will
be dropped.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Remove the global head and tail indexes and move them into the
page header. Each page will now keep track of where the last
write and read was made. We also rename the head and tail to read
and write for better clarification.
This patch is needed for future enhancements to move the ring buffer
to a lockless solution.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
At this time, only built-in initcalls interest us.
We can't really produce a relevant graph if we include
the modules initcall too.
I had good results after this patch (see svg in attachment).
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The assigning of the pc counter is in the wrong spot in the
check_critical_timing function. The pc variable is used in the
out jump.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
My original patch had a compile bug when NUMA was configured. I
referenced cpu when it should have been cpu_buffer->cpu.
Ingo quickly fixed this bug by replacing cpu with 'i' because that
was the loop counter. Unfortunately, the 'i' was the counter of
pages, not CPUs. This caused a crash when the number of pages allocated
for the buffers exceeded the number of pages, which would usually
be the case.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
After some initcall traces, some initcall names may be inconsistent.
That's because these functions will disappear from the .init section
and also their name from the symbols table.
So we have to copy the name of the function in a buffer large enough
during the trace appending. It is not costly for the ring_buffer because
the number of initcall entries is commonly not really large.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Change the boot tracer printing to make it parsable for
the scripts/bootgraph.pl script.
We have now to output two lines for each initcall, according to the
printk in do_one_initcall() in init/main.c
We need now the call's time and the return's time.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
fix:
kernel/trace/ring_buffer.c: In function ‘rb_allocate_pages’:
kernel/trace/ring_buffer.c:235: error: ‘cpu’ undeclared (first use in this function)
kernel/trace/ring_buffer.c:235: error: (Each undeclared identifier is reported only once
kernel/trace/ring_buffer.c:235: error: for each function it appears in.)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
With the new ring buffer infrastructure in ftrace, I'm trying to make
ftrace a little more light weight.
This patch converts a lot of the local_irq_save/restore into
preempt_disable/enable. The original preempt count in a lot of cases
has to be sent in as a parameter so that it can be recorded correctly.
Some places were recording it incorrectly before anyway.
This is also laying the ground work to make ftrace a little bit
more reentrant, and remove all locking. The function tracers must
still protect from reentrancy.
Note: All the function tracers must be careful when using preempt_disable.
It must do the following:
resched = need_resched();
preempt_disable_notrace();
[...]
if (resched)
preempt_enable_no_resched_notrace();
else
preempt_enable_notrace();
The reason is that if this function traces schedule() itself, the
preempt_enable_notrace() will cause a schedule, which will lead
us into a recursive failure.
If we needed to reschedule before calling preempt_disable, we
should have already scheduled. Since we did not, this is most
likely that we should not and are probably inside a schedule
function.
If resched was not set, we still need to catch the need resched
flag being set when preemption was off and the if case at the
end will catch that for us.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The current method of overlaying the page frame as the buffer page pointer
can be very dangerous and limits our ability to do other things with
a page from the buffer, like send it off to disk.
This patch allocates the buffer_page instead of overlaying the page's
page frame. The use of the buffer_page has hardly changed due to this.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The mmiotrace map had a bug that would typecast the entry from
the trace to the wrong type. That is a known danger of C typecasts,
there's absolutely zero checking done on them.
Help that problem a bit by using a GCC extension to implement a
type filter that restricts the types that a trace record can be
cast into, and by adding a dynamic check (in debug mode) to verify
the type of the entry.
This patch adds a macro to assign all entries of ftrace using the type
of the variable and checking the entry id. The typecasts are now done
in the macro for only those types that it knows about, which should
be all the types that are allowed to be read from the tracer.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The old "lock always" scheme had issues with lockdep, and was not very
efficient anyways.
This patch does a new design to be partially lockless on writes.
Writes will add new entries to the per cpu pages by simply disabling
interrupts. When a write needs to go to another page than it will
grab the lock.
A new "read page" has been added so that the reader can pull out a page
from the ring buffer to read without worrying about the writer writing over
it. This allows us to not take the lock for all reads. The lock is
now only taken when a read needs to go to a new page.
This is far from lockless, and interrupts still need to be disabled,
but it is a step towards a more lockless solution, and it also
solves a lot of the issues that were noticed by the first conversion
of ftrace to the ring buffers.
Note: the ring_buffer_{un}lock API has been removed.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The raw_local_irq_save causes issues with lockdep. We don't need it
so replace them with local_irq_save.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adapts the boot tracer to the new type of the
print_line callback.
It still relays entries it doesn't support to default output
functions.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Adapt mmiotrace to the new print_line type.
By default, it ignores (and consumes) types it doesn't support.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch fixes a bug which break the pipe when the seq is empty.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We need a kind of disambiguation when a print_line callback
returns 0.
_There is not enough space to print all the entry.
Please flush the seq and retry.
_I can't handle this type of entry
This patch changes the type of this callback for better information.
Also some changes have been made in this V2.
_ Only relay to default functions after the print_line callback fails.
_ This patch doesn't fix the issue with the broken pipe (see patch 2/4 for that)
Some things are still in discussion:
_ Find better names for the enum print_line_t values
_ Change the type of print_trace_line into boolean.
Patches to change that can be sent later.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
