Pull first batch of ARC changes from Vineet Gupta:
"There's a second bunch to follow next week - which depends on commits
on other trees (irq/net). I'd have preferred the accompanying ARC
change via respective trees, but it didn't workout somehow.
Highlights of changes:
- Continuation of ARC MM changes from 3.10 including
zero page optimization
Setting pagecache pages dirty by default
Non executable stack by default
Reducing dcache flushes for aliasing VIPT config
- Long overdue rework of pt_regs machinery - removing the unused word
gutters and adding ECR register to baseline (helps cleanup lot of
low level code)
- Support for ARC gcc 4.8
- Few other preventive fixes, cosmetics, usage of Kconfig helper..
The diffstat is larger than normal primarily because of arcregs.h
header split as well as beautification of macros in entry.h"
* tag 'arc-v3.11-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (32 commits)
ARC: warn on improper stack unwind FDE entries
arc: delete __cpuinit usage from all arc files
ARC: [tlb-miss] Fix bug with CONFIG_ARC_DBG_TLB_MISS_COUNT
ARC: [tlb-miss] Extraneous PTE bit testing/setting
ARC: Adjustments for gcc 4.8
ARC: Setup Vector Table Base in early boot
ARC: Remove explicit passing around of ECR
ARC: pt_regs update #5: Use real ECR for pt_regs->event vs. synth values
ARC: stop using pt_regs->orig_r8
ARC: pt_regs update #4: r25 saved/restored unconditionally
ARC: K/U SP saved from one location in stack switching macro
ARC: Entry Handler tweaks: Simplify branch for in-kernel preemption
ARC: Entry Handler tweaks: Avoid hardcoded LIMMS for ECR values
ARC: Increase readability of entry handlers
ARC: pt_regs update #3: Remove unused gutter at start of callee_regs
ARC: pt_regs update #2: Remove unused gutter at start of pt_regs
ARC: pt_regs update #1: Align pt_regs end with end of kernel stack page
ARC: pt_regs update #0: remove kernel stack canary
ARC: [mm] Remove @write argument to do_page_fault()
ARC: [mm] Make stack/heap Non-executable by default
...
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings. In any case, they are temporary and harmless.
This removes all the arch/arc uses of the __cpuinit macros from
all C files. Currently arc does not have any __CPUINIT used in
assembly files.
[1] https://lkml.org/lkml/2013/5/20/589
Cc: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
* DWARF unwinder related
+ Force DWARF2 compliant .debug_frame (gcc 4.8 defaults to DWARF4
which kernel unwinder can't grok).
+ Discard the additional .eh_frame generated
+ Discard the dwarf4 debug info generated by -gdwarf-2 for normal
no debug case
* 4.8 already uses arc600 multilibs for -mno-mpy
* switch to using uclibc compiler (to get -mmedium-calls and -mno-sdata)
and also since buildroot can only use 1 toolchain
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Otherwise early boot exceptions such as instructions errors due to
configuration mismatch between kernel and hardware go off to la-la land,
as opposed to hitting the handler and panic()'ing properly.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
With ECR now part of pt_regs
* No need to propagate from lowest asm handlers as arg
* No need to save it in tsk->thread.cause_code
* Avoid bit chopping to access the bit-fields
More code consolidation, cleanup
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
pt_regs->event was set with artificial values to identify the low level
system event (syscall trap / breakpoint trap / exceptions / interrupts)
With r8 saving out of the way, the full word can be used to save real
ECR (Exception Cause Register) which helps idenify the event naturally,
including additional info such as cause code, param.
Only for Interrupts, where ECR is not applicable, do we resort to
synthetic non ECR values.
SAVE_ALL_TRAP/EXCEPTIONS can now be merged as they both use ECR with
different runtime values.
The ptrace helpers now use the sub-fields of ECR to distinguish the
events (e.g. vector 0x25 is trap, param 0 is syscall...)
The following benefits will follow:
(1) This centralizes the location of where ECR is saved and will allow
the cleanup of task->thread.cause_code ECR placeholder which is set
in non-uniform way. Then ARC VM code can safely rely on it being
there for purpose of finer grained VM_EXEC dcache flush (based on
exec fault: I-TLB Miss)
(2) Further, ECR being passed around from low level handlers as arg can
be eliminated as it is part of standard reg-file in pt_regs
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
(This is a VERY IMP change for low level interrupt/exception handling)
-----------------------------------------------------------------------
WHAT
-----------------------------------------------------------------------
* User 25 now saved in pt_regs->user_r25 (vs. tsk->thread_info.user_r25)
* This allows Low level interrupt code to unconditionally save r25
(vs. the prev version which would only do it for U->K transition).
Ofcourse for nested interrupts, only the pt_regs->user_r25 of
bottom-most frame is useful.
* simplifies the interrupt prologue/epilogue
* Needed for ARCv2 ISA code and done here to keep design similar with
ARCompact event handling
-----------------------------------------------------------------------
WHY
-------------------------------------------------------------------------
With CONFIG_ARC_CURR_IN_REG, r25 is used to cache "current" task pointer
in kernel mode. So when entering kernel mode from User Mode
- user r25 is specially safe-kept (it being a callee reg is NOT part of
pt_regs which are saved by default on each interrupt/trap/exception)
- r25 loaded with current task pointer.
Further, if interrupt was taken in kernel mode, this is skipped since we
know that r25 already has valid "current" pointer.
With 2 level of interrupts in ARCompact ISA, detecting this is difficult
but still possible, since we could be in kernel mode but r25 not already saved
(in fact the stack itself might not have been switched).
A. User mode
B. L1 IRQ taken
C. L2 IRQ taken (while on 1st line of L1 ISR)
So in #C, although in kernel mode, r25 not saved (infact SP not
switched at all)
Given that ARcompact has manual stack switching, we could use a bit of
trickey - The low level code would make sure that SP is only set to kernel
mode value at the very end (after saving r25). So a non kernel mode SP,
even if in kernel mode, meant r25 was NOT saved.
The same paradigm won't work in ARCv2 ISA since SP is auto-switched so
it's setting can't be delayed/constrained.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
* use artificial PUSH/POP contructs for CORE Reg save/restore to stack
* use artificial PUSHAX/POPAX contructs for Auxiliary Space regs
* macro'ize multiple copies of callee-reg-save/restore (SAVE_R13_TO_R24)
* use BIC insn for inverse-and operation
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
This is trickier than prev two:
* context switching code saves kernel mode callee regs in the format of
struct callee_regs thus needs adjustment. This also reduces the height
of topmost kernel stack frame by 1 word.
* Since kernel stack unwinder is sensitive to height of topmost kernel
stack frame, that needs a word of adjustment too.
ptrace needs a bit of updating since pt_regs now diverges from
user_regs_struct.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Historically, pt_regs would end at offset of 1 word from end of stack
page.
----------------- -> START of page (task->stack)
| |
| thread_info |
-----------------
| |
^ ~ ~
| ~ ~
| | |
| | | <---- pt_regs used to END here
-----------------
| 1 word GUTTER |
----------------- -> End of page (START of kernel stack)
This required special "one-off" considerations in low level code.
The root cause is very likely assumption of "empty" SP by the original
ARC kernel hackers, despite ARC700 always been "full" SP.
So finally RIP one word gutter !
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
This can be ascertained within do_page_fault() since it gets the full
ECR (Exception Cause Register).
Further, for both the callers of do_page_fault(): Prot-V / D-TLB-Miss,
the cause sub-fields in ECR are same for same type of access, making the
code much more simpler.
D-TLB-Miss [LD] 0x00_21_01_00
Prot-V [LD] 0x00_23_01_00
^^
D-TLB-Miss [ST] 0x00_21_02_00
Prot-V [ST] 0x00_23_02_00
^^
D-TLB-Miss [EX] 0x00_21_03_00
Prot-V [EX] 0x00_23_03_00
^^
This helps code consolidation, which is even better when moving code from
assembler to "C".
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
* Move the various sub-system defines/types into relevant files/functions
(reduces compilation time)
* move CPU specific stuff out of asm/tlb.h into asm/mmu.h
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Pull ARC port updates from Vineet Gupta:
"Support for two new platforms based on ARC700:
- Abilis TB10x SoC [Chritisian/Pierrick]
- Simulator only System-C Model [Mischa]
ARC specific MM improvements:
- Avoid full TLB flush (ASID increment) on munmap (even single page)
- VIPT Cache Flushing improvements
+ Delayed dcache flush for non-aliasing dcache (big performance boost)
+ icache flush aliasing agnostic (no need to kill all possible aliases)
Others:
- Avoid needless rebuild of DTB files for every kernel build
- Remove builtin cmdline as that is already provided by DeviceTree/bootargs
- Fixing unaligned access emulation corner case
- checkpatch fixes [Sachin]
- Various fixlets [Noam]
- Minor build failures/cleanups"
* tag 'arc-v3.10-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (35 commits)
ARC: [mm] Lazy D-cache flush (non aliasing VIPT)
ARC: [mm] micro-optimize page size icache invalidate
ARC: [mm] remove the pessimistic all-alias-invalidate icache helpers
ARC: [mm] consolidate icache/dcache sync code
ARC: [mm] optimise icache flush for kernel mappings
ARC: [mm] optimise icache flush for user mappings
ARC: [mm] optimize needless full mm TLB flush on munmap
ARC: Add support for nSIM OSCI System C model
ARC: [TB10x] Adapt device tree to new compatible string
ARC: [TB10x] Add support for TB10x platform
ARC: [TB10x] Device tree of TB100 and TB101 Development Kits
ARC: Prepare interrupt code for external controllers
ARC: Allow embedded arc-intc to be properly placed in DT intc hierarchy
ARC: [cmdline] Don't overwrite u-boot provided bootargs
ARC: [cmdline] Remove CONFIG_CMDLINE
ARC: [plat-arcfpga] defconfig update
ARC: unaligned access emulation broken if callee-reg dest of LD/ST
ARC: unaligned access emulation error handling consolidation
ARC: Debug/crash-printing Improvements
ARC: fix typo with clock speed
...
This patch adds some room for CPU-external interrupt controllers in the
Linux interrupt space. Until now, only the 32 CPU internal interrupt lines
were supported which does not allow for external interrupt controllers such
as GPIO modules etc.
Signed-off-by: Christian Ruppert <christian.ruppert@abilis.com>
Signed-off-by: Pierrick Hascoet <pierrick.hascoet@abilis.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
arc-intc is initialized in arc common code as it is applicable to all
platforms. However platforms with their own external intc still need to
refer to it for correct DT interrupt tree hierarchy setup,
e.g.
static struct of_device_id __initdata tb10x_irq_ids[] = {
{ .compatible = "snps,arc700-intc", .data = dummy_init_irq },
{ .compatible = "abilis,tb10x_ictl", .data = tb10x_init_irq },
{},
};
The fix is to use the generic irqchip framework to tie all irqchips in
a special linker section and then call irqchip_init() which calls the
DT of_irq_init() for all the intc in one go.
That way the platform code need not be aware of arc-intc at all.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
The existing code was wrong on several counts:
* uboot provided bootargs were copied into @boot_command_line, only to
be over-written by setup_machine_fdt(), effectively lost
* @cmdline_p returned by setup_arch() to start_kernel() didn't include
the DT /bootargs
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Given that DeviceTree /bootargs can provide similar functionality,
no point in providing duplicate infrastructure.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
