This pulls in the staging tree fixes in 3.6-rc6 into our branch to resolve the
merge issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steve Rostedt asked for the merge of a single commit, into both
the RCU and the perf/tracing tree:
| Josh made a change to the tracing code that affects both the
| work Paul McKenney and I are currently doing. At the last
| Kernel Summit back in August, Linus said when such a case
| exists, it is best to make a separate branch based off of his
| tree and place the change there. This way, the repositories
| that need to share the change can both pull them in and the
| SHA1 will match for both. Whichever branch is pulled in first
| by Linus will also pull in the necessary change for the other
| branch as well.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull blackfin updates from Bob Liu:
"One kbuild and a smp build fix."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfin:
kbuild: add symbol prefix arg to kallsyms
blackfin: smp: adapt to generic smp helpers
Commit 1f2bfbd00e ("kbuild: link of
vmlinux moved to a script") introduced in v3.5-rc1 broke kallsyms on
architectures which have symbol prefixes.
The --symbol-prefix argument used to be added to the KALLSYMS command
line from the architecture Makefile, however this isn't picked up by the
new scripts/link-vmlinux.sh. This resulted in symbols like
kallsyms_addresses being added which weren't correctly overriding the
weak symbols such as _kallsyms_addresses. These could then trigger
BUG_ONs in kallsyms code.
This is fixed by removing the KALLSYMS addition from the architecture
Makefile, and using CONFIG_SYMBOL_PREFIX in the link-vmlinux.sh script
to determine whether to add the --symbol-prefix argument.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
~0 can not be casted to u8. Instead of using the IPACK_ANY_ID for the format
field we introduce a new IPACK_ANY_FORMAT specifically for that field and
defined as 0xff.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull kbuild fixes from Michal Marek:
"These are two fixes that should go into 3.6. The link-vmlinux.sh one
is obvious.
The other one fixes make firmware_install with certain configurations,
where a file in the toplevel firmware tree gets installed first, and
$(INSTALL_FW_PATH)/$$(dir <file>) results in /lib/firmware/./, which
confuses make 3.82 for some reason."
* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
firmware: fix directory creation rule matching with make 3.82
link-vmlinux.sh: Fix stray "echo" in error message
The modaliases look like ipack:fXvNdM, where X is the format version (8
bit) and N and M are the vendor and device ID represented as 32 bit
hexadecimal numbers each. Using 32 bits allows us to define IPACK_ANY_ID
as (~0) without interfering with the valid ids.
The resulting modalias string for ipoctal.ko looks like this (once
ipoctal provides a device table):
alias: ipack:f01v000000F0d00000048*
alias: ipack:f01v000000F0d0000002A*
alias: ipack:f01v000000F0d00000022*
(output from modinfo)
Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This error may happen when the user's id or path includes .ko string.
For example, user's id is xxx.ko and building test.ko module,
the test.mod file lists ko name and all object files.
/home/xxx.ko/kernel_dev/device/drivers/test.ko
/home/xxx.ko/kernel_dev/device/drivers/test_main.o
/home/xxx.ko/kernel_dev/device/drivers/test_io.o ...
Current Makefile.modpost and Makefile.modinst find and list up not
only test.ko but also other object files.
because all of object file's path includes .ko string.
This is a patch to fix it.
Signed-off-by: Gunho Lee <gunho.lee@lge.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
scripts/tags.sh: Add magic for pci access functions
Make [ce]tags find the pci_bus_read_config_* and pci_bus_write_config_*
definitions
Signed-off-by: Kirill Tkhai <tkhai@yandex.ru>
Signed-off-by: Michal Marek <mmarek@suse.cz>
As 67d34a6a39 said, the make target
'oldnoconfig' is a misnomer. It doesn't set new symbols to 'n', but
instead sets it to their default values.
This patch fixes the document in conf.c, and will submit another patch
to replace 'oldnoconfig' to 'olddefconfig'
Signed-off-by: Adam Lee <adam8157@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Add a ternary operator version of the open-coded PTR_RET().
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
New output option html5 writes validating HTML5 and adds
CSS classes ready to be selected by third-party stylesheets.
HTML ids have been added to block-level elements "article" for
direct reference of particular objects via URL.
Signed-off-by: Dan Luedtke <mail@danrl.de>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Attempting to run 'firmware_install' with CONFIG_USB_SERIAL_TI=y when
using make 3.82 results in an error
make[2]: *** No rule to make target `/lib/firmware/./', needed by
`/lib/firmware/ti_3410.fw'. Stop.
It turns out make 3.82 is picky when matching directory names with
trailing slashes as a result, where make 3.81 would handle this
correctly make 3.82 does not find the rule needed to create the
directory.
The './' seen in the error is added by $(dir) for firmware which
resides in the base firmware src directory, such as
ti_3410.fw.ihex. By performing $(dir) after we prepend the
$(INSTALL_FW_PATH) we can ensure we don't end up with a './' in the
middle of the path and the directory will be properly created.
This change works with make 3.81 and should work with previous
versions as well.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Since commit d0e1e09568 initscr() is called twice in mconf.
Do it only in init_dialog() in util.c and there also save the
cursor position for the signal handler in mconf.c.
Signed-off-by: Dirk Gouders <gouders@et.bocholt.fh-gelsenkirchen.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Commit b13edf7ff2 ("checkpatch: add checks for do {} while (0) macro
misuses") added a test that is overly simplistic for single statement
macros.
Macros that start with control tests should be enclosed in a do {} while
(0) loop.
Add the necessary control tests to the check.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Andy Whitcroft <apw@canonical.com>
Tested-by: Franz Schrober <franzschrober@yahoo.de>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
perlcritic complains about $kconfig being reused in the foreach loop
at the end of read_kconfig. Change it to a my variable.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Convert remaining open calls to use the perl's preferred 3 parameter
open.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Change find_config function to read_config. It now finds the config,
reads the config into an array, and returns the array. This makes it
a little cleaner and changes the open to use perl's 3 option open.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Running streamline_config.pl as it's shown it in the comment header,
you will get a warning about $ksource being uninitialized. This is
because $ksource is set to ARGV[0], but the examples don't require any
arguments. Fix by setting ksource to . if no ARGV[0] is given.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When dumping "Code: " sections from an oops, the trapping instruction
%rip points to can be a string copy
2b:* f3 a5 rep movsl %ds:(%rsi),%es:(%rdi)
and the line contain a bunch of ":". Current "cut" selects only the and
the second field output looks funnily overlaid this:
2b:* f3 a5 rep movsl %ds <-- trapping instruction:(%rsi),%es:(%rdi
Fix this by selecting the remaining fields too.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
