nvec modules do not require other stuff to be build in,
nor does nvec_ps2 require mouse support, only generic
serio support.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This saves us some calls and thus makes the code shorter
and nicer.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The constant I2C_SL_NEWL meant "new slave", but the
S was missing.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This changes the serio type of the nvec_ps2 mouse port to passthrough.
The old 8042 type seems appropiete for keyboards only.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This change makes the touchpad buttons work after suspend/resume.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This can print the mouse traffic which goes over the i2c bus. Make
mouse debugging messages configurable and disable them by default.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This packet size used on most modern touchpads. Ideally, this should
be configurable or autodetected.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Instead of executing these commands during open/close, the start/stop
event of the serio device seem to be more appropiete.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This adds suspend and resume functions to the nvec_ps2 mouse driver.
During suspend the nvec sends a "Cancel all mouse events" command. If
this is missed, there will be still some bytes in the received buffer
after resume which make the mouse go out of sync.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This adds device tree support to the nvec driver. By using this method
it is no longer necessary to specify platform data through a board
file.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Acked-by: Stephen Warren <swarren@nvidia.com>
Cc: Julian Andres Klode <jak@jak-linux.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes a compilation error in nvec.c due to the missing module.h include.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Cc: Julian Andres Klode <jak@jak-linux.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The suspend commands need to be sent using the
synchronous method, otherwise the power gets
disabled before the messages are transferred.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
[jak@jak-linux.org: Rewrote commit message]
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As the comment indicates, adding that udelay seems to
improve the stability of the communication, although
it is not known why this is the case.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add the includes that are currently missing in nvec.h
and nvec.c and reorder them alphabetically.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The nvec_power system polls nvec for battery information. In some
cases, that part seems to be overloaded and unable to respond
fast in which case it sends an incomplete response. We need to
mark the transfer as completed, though, in order to prevent
endless retries which can kill nvec.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Get 4 bytes of data from nvec at once instead of just a single
byte. This makes the driver more similar to nvidias and might
improve reliability.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Return the return value of nvec_write_async() in the methods
returning an int.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Reject incomplete messages, causing the request to be
transmitted again. This should fix various problems
out there.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
If no RX buffer is available in state 1, jump to state
0 again. This will produce an incredible amount of
warnings, but it is not supposed to happen anyway.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Allow TX buffers to be allocated only in the upper 75% of the pool
to avoid a completely filled buffer preventing the driver from
processing responses. This also improves performance, as RX
allocations do not require checking buffers allocated for TX
unless there are more than 16 incoming messages -- which is
highly unlikely.
An earlier version used the lower 75% for TX messages, but
that was considered to be not that effective due to the
overlaps of RX and TX buffers mentioned above.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Client code wishing to make use of nvec_write_sync() must
have a way to free the returned pointer, otherwise we run
out of poool memory fairly soon.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Those macros are needed only for implementation purposes and
do not have any use for other code wishing to use nvec.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add kernel-doc comments describing the functions
and structs we currently have.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Change nvec_write_async() to return an integer, 0 by default,
a negative error on failure. Change nvec_write_sync() to
check the return value and abort if it is negative.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
