mirror of
https://github.com/armbian/linux.git
synced 2026-01-06 10:13:00 -08:00
166a2967b45ede2e2e56f3ede3cd32053dc17812
590 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Paul E. McKenney
|
fd4b352687 |
rcu: Update RCU_FAST_NO_HZ tracing for lazy callbacks
In the current code, a short dyntick-idle interval (where there is at least one non-lazy callback on the CPU) and a long dyntick-idle interval (where there are only lazy callbacks on the CPU) are traced identically, which can be less than helpful. This commit therefore emits different event traces in these two cases. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com> Tested-by: Pascal Chapperon <pascal.chapperon@wanadoo.fr> |
||
Mel Gorman
|
23b9da55c5 |
mm: vmscan: remove reclaim_mode_t
There is little motiviation for reclaim_mode_t once RECLAIM_MODE_[A]SYNC and lumpy reclaim have been removed. This patch gets rid of reclaim_mode_t as well and improves the documentation about what reclaim/compaction is and when it is triggered. Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Hugh Dickins <hughd@google.com> Cc: Ying Han <yinghan@google.com> Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Mel Gorman
|
41ac1999c3 |
mm: vmscan: do not stall on writeback during memory compaction
This patch stops reclaim/compaction entering sync reclaim as this was only intended for lumpy reclaim and an oversight. Page migration has its own logic for stalling on writeback pages if necessary and memory compaction is already using it. Waiting on page writeback is bad for a number of reasons but the primary one is that waiting on writeback to a slow device like USB can take a considerable length of time. Page reclaim instead uses wait_iff_congested() to throttle if too many dirty pages are being scanned. Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Hugh Dickins <hughd@google.com> Cc: Ying Han <yinghan@google.com> Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Mel Gorman
|
c53919adc0 |
mm: vmscan: remove lumpy reclaim
This series removes lumpy reclaim and some stalling logic that was
unintentionally being used by memory compaction. The end result is that
stalling on dirty pages during page reclaim now depends on
wait_iff_congested().
Four kernels were compared
3.3.0 vanilla
3.4.0-rc2 vanilla
3.4.0-rc2 lumpyremove-v2 is patch one from this series
3.4.0-rc2 nosync-v2r3 is the full series
Removing lumpy reclaim saves almost 900 bytes of text whereas the full
series removes 1200 bytes.
text data bss dec hex filename
|
||
Rik van Riel
|
e709ffd616 |
mm: remove swap token code
The swap token code no longer fits in with the current VM model. It does not play well with cgroups or the better NUMA placement code in development, since we have only one swap token globally. It also has the potential to mess with scalability of the system, by increasing the number of non-reclaimable pages on the active and inactive anon LRU lists. Last but not least, the swap token code has been broken for a year without complaints, as reported by Konstantin Khlebnikov. This suggests we no longer have much use for it. The days of sub-1G memory systems with heavy use of swap are over. If we ever need thrashing reducing code in the future, we will have to implement something that does scale. Signed-off-by: Rik van Riel <riel@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Hugh Dickins <hughd@google.com> Acked-by: Bob Picco <bpicco@meloft.net> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Linus Torvalds
|
90324cc1b1 |
Merge tag 'writeback' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux
Pull writeback tree from Wu Fengguang: "Mainly from Jan Kara to avoid iput() in the flusher threads." * tag 'writeback' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux: writeback: Avoid iput() from flusher thread vfs: Rename end_writeback() to clear_inode() vfs: Move waiting for inode writeback from end_writeback() to evict_inode() writeback: Refactor writeback_single_inode() writeback: Remove wb->list_lock from writeback_single_inode() writeback: Separate inode requeueing after writeback writeback: Move I_DIRTY_PAGES handling writeback: Move requeueing when I_SYNC set to writeback_sb_inodes() writeback: Move clearing of I_SYNC into inode_sync_complete() writeback: initialize global_dirty_limit fs: remove 8 bytes of padding from struct writeback_control on 64 bit builds mm: page-writeback.c: local functions should not be exposed globally |
||
|
Linus Torvalds
|
ece78b7df7 |
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull ext2, ext3 and quota fixes from Jan Kara:
"Interesting bits are:
- removal of a special i_mutex locking subclass (I_MUTEX_QUOTA) since
quota code does not need i_mutex anymore in any unusual way.
- backport (from ext4) of a fix of a checkpointing bug (missing cache
flush) that could lead to fs corruption on power failure
The rest are just random small fixes & cleanups."
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
ext2: trivial fix to comment for ext2_free_blocks
ext2: remove the redundant comment for ext2_export_ops
ext3: return 32/64-bit dir name hash according to usage type
quota: Get rid of nested I_MUTEX_QUOTA locking subclass
quota: Use precomputed value of sb_dqopt in dquot_quota_sync
ext2: Remove i_mutex use from ext2_quota_write()
reiserfs: Remove i_mutex use from reiserfs_quota_write()
ext4: Remove i_mutex use from ext4_quota_write()
ext3: Remove i_mutex use from ext3_quota_write()
quota: Fix double lock in add_dquot_ref() with CONFIG_QUOTA_DEBUG
jbd: Write journal superblock with WRITE_FUA after checkpointing
jbd: protect all log tail updates with j_checkpoint_mutex
jbd: Split updating of journal superblock and marking journal empty
ext2: do not register write_super within VFS
ext2: Remove s_dirt handling
ext2: write superblock only once on unmount
ext3: update documentation with barrier=1 default
ext3: remove max_debt in find_group_orlov()
jbd: Refine commit writeout logic
|
||
|
Linus Torvalds
|
644473e9c6 |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull user namespace enhancements from Eric Biederman:
"This is a course correction for the user namespace, so that we can
reach an inexpensive, maintainable, and reasonably complete
implementation.
Highlights:
- Config guards make it impossible to enable the user namespace and
code that has not been converted to be user namespace safe.
- Use of the new kuid_t type ensures the if you somehow get past the
config guards the kernel will encounter type errors if you enable
user namespaces and attempt to compile in code whose permission
checks have not been updated to be user namespace safe.
- All uids from child user namespaces are mapped into the initial
user namespace before they are processed. Removing the need to add
an additional check to see if the user namespace of the compared
uids remains the same.
- With the user namespaces compiled out the performance is as good or
better than it is today.
- For most operations absolutely nothing changes performance or
operationally with the user namespace enabled.
- The worst case performance I could come up with was timing 1
billion cache cold stat operations with the user namespace code
enabled. This went from 156s to 164s on my laptop (or 156ns to
164ns per stat operation).
- (uid_t)-1 and (gid_t)-1 are reserved as an internal error value.
Most uid/gid setting system calls treat these value specially
anyway so attempting to use -1 as a uid would likely cause
entertaining failures in userspace.
- If setuid is called with a uid that can not be mapped setuid fails.
I have looked at sendmail, login, ssh and every other program I
could think of that would call setuid and they all check for and
handle the case where setuid fails.
- If stat or a similar system call is called from a context in which
we can not map a uid we lie and return overflowuid. The LFS
experience suggests not lying and returning an error code might be
better, but the historical precedent with uids is different and I
can not think of anything that would break by lying about a uid we
can't map.
- Capabilities are localized to the current user namespace making it
safe to give the initial user in a user namespace all capabilities.
My git tree covers all of the modifications needed to convert the core
kernel and enough changes to make a system bootable to runlevel 1."
Fix up trivial conflicts due to nearby independent changes in fs/stat.c
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (46 commits)
userns: Silence silly gcc warning.
cred: use correct cred accessor with regards to rcu read lock
userns: Convert the move_pages, and migrate_pages permission checks to use uid_eq
userns: Convert cgroup permission checks to use uid_eq
userns: Convert tmpfs to use kuid and kgid where appropriate
userns: Convert sysfs to use kgid/kuid where appropriate
userns: Convert sysctl permission checks to use kuid and kgids.
userns: Convert proc to use kuid/kgid where appropriate
userns: Convert ext4 to user kuid/kgid where appropriate
userns: Convert ext3 to use kuid/kgid where appropriate
userns: Convert ext2 to use kuid/kgid where appropriate.
userns: Convert devpts to use kuid/kgid where appropriate
userns: Convert binary formats to use kuid/kgid where appropriate
userns: Add negative depends on entries to avoid building code that is userns unsafe
userns: signal remove unnecessary map_cred_ns
userns: Teach inode_capable to understand inodes whose uids map to other namespaces.
userns: Fail exec for suid and sgid binaries with ids outside our user namespace.
userns: Convert stat to return values mapped from kuids and kgids
userns: Convert user specfied uids and gids in chown into kuids and kgid
userns: Use uid_eq gid_eq helpers when comparing kuids and kgids in the vfs
...
|
||
|
Linus Torvalds
|
468f4d1a85 |
Merge tag 'pm-for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki: - Implementation of opportunistic suspend (autosleep) and user space interface for manipulating wakeup sources. - Hibernate updates from Bojan Smojver and Minho Ban. - Updates of the runtime PM core and generic PM domains framework related to PM QoS. - Assorted fixes. * tag 'pm-for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (25 commits) epoll: Fix user space breakage related to EPOLLWAKEUP PM / Domains: Make it possible to add devices to inactive domains PM / Hibernate: Use get_gendisk to verify partition if resume_file is integer format PM / Domains: Fix computation of maximum domain off time PM / Domains: Fix link checking when add subdomain PM / Sleep: User space wakeup sources garbage collector Kconfig option PM / Sleep: Make the limit of user space wakeup sources configurable PM / Documentation: suspend-and-cpuhotplug.txt: Fix typo PM / Domains: Cache device stop and domain power off governor results, v3 PM / Domains: Make device removal more straightforward PM / Sleep: Fix a mistake in a conditional in autosleep_store() epoll: Add a flag, EPOLLWAKEUP, to prevent suspend while epoll events are ready PM / QoS: Create device constraints objects on notifier registration PM / Runtime: Remove device fields related to suspend time, v2 PM / Domains: Rework default domain power off governor function, v2 PM / Domains: Rework default device stop governor function, v2 PM / Sleep: Add user space interface for manipulating wakeup sources, v3 PM / Sleep: Add "prevent autosleep time" statistics to wakeup sources PM / Sleep: Implement opportunistic sleep, v2 PM / Sleep: Add wakeup_source_activate and wakeup_source_deactivate tracepoints ... |
||
|
Linus Torvalds
|
2e341ca686 |
Merge tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This is the first big chunk for 3.5 merges of sound stuff.
There are a few big changes in different areas. First off, the
streaming logic of USB-audio endpoints has been largely rewritten for
the better support of "implicit feedback". If anything about USB got
broken, this change has to be checked.
For HD-audio, the resume procedure was changed; instead of delaying
the resume of the hardware until the first use, now waking up
immediately at resume. This is for buggy BIOS.
For ASoC, dynamic PCM support and the improved support for digital
links between off-SoC devices are major framework changes.
Some highlights are below:
* HD-audio
- Avoid accesses of invalid pin-control bits that may stall the codec
- V-ref setup cleanups
- Fix the races in power-saving code
- Fix the races in codec cache hashes and connection lists
- Split some common codes for BIOS auto-parser to hda_auto_parser.c
- Changed the PM resume code to wake up immediately for buggy BIOS
- Creative SoundCore3D support
- Add Conexant CX20751/2/3/4 codec support
* ASoC
- Dynamic PCM support, allowing support for SoCs with internal
routing through components with tight sequencing and formatting
constraints within their internal paths or where there are multiple
components connected with CPU managed DMA controllers inside the
SoC.
- Greatly improved support for direct digital links between off-SoC
devices, providing a much simpler way of connecting things like
digital basebands to CODECs.
- Much more fine grained and robust locking, cleaning up some of the
confusion that crept in with multi-component.
- CPU support for nVidia Tegra 30 I2S and audio hub controllers and
ST-Ericsson MSP I2S controolers
- New CODEC drivers for Cirrus CS42L52, LAPIS Semiconductor ML26124,
Texas Instruments LM49453.
- Some regmap changes needed by the Tegra I2S driver.
- mc13783 audio support.
* Misc
- Rewrite with module_pci_driver()
- Xonar DGX support for snd-oxygen
- Improvement of packet handling in snd-firewire driver
- New USB-endpoint streaming logic
- Enhanced M-audio FTU quirks and relevant cleanups
- Increment the support of OSS devices to 256
- snd-aloop accuracy improvement
There are a few more pending changes for 3.5, but they will be sent
slightly later as partly depending on the changes of DRM."
Fix up conflicts in regmap (due to duplicate patches, with some further
updates then having already come in from the regmap tree). Also some
fairly trivial context conflicts in the imx and mcx soc drivers.
* tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (280 commits)
ALSA: snd-usb: fix stream info output in /proc
ALSA: pcm - Add proper state checks to snd_pcm_drain()
ALSA: sh: Fix up namespace collision in sh_dac_audio.
ALSA: hda/realtek - Fix unused variable compile warning
ASoC: sh: fsi: enable chip specific data transfer mode
ASoC: sh: fsi: call fsi_hw_startup/shutdown from fsi_dai_trigger()
ASoC: sh: fsi: use same format for IN/OUT
ASoC: sh: fsi: add fsi_version() and removed meaningless version check
ASoC: sh: fsi: use register field macro name on IN/OUT_DMAC
ASoC: tegra: Add machine driver for WM8753 codec
ALSA: hda - Fix possible races of accesses to connection list array
ASoC: OMAP: HDMI: Introduce codec
ARM: mx31_3ds: Add sound support
ASoC: imx-mc13783 cleanup
mx31moboard: Add sound support
ASoC: mc13783 codec cleanups
ASoC: add imx-mc13783 sound support
ASoC: Add mc13783 codec
mfd: mc13xxx: add codec platform data
ASoC: don't flip master of DT-instantiated DAI links
...
|
||
|
Linus Torvalds
|
e8650a0823 |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial updates from Jiri Kosina: "As usual, it's mostly typo fixes, redundant code elimination and some documentation updates." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (57 commits) edac, mips: don't change code that has been removed in edac/mips tree xtensa: Change mail addresses of Hannes Weiner and Oskar Schirmer lib: Change mail address of Oskar Schirmer net: Change mail address of Oskar Schirmer arm/m68k: Change mail address of Sebastian Hess i2c: Change mail address of Oskar Schirmer net: Fix tcp_build_and_update_options comment in struct tcp_sock atomic64_32.h: fix parameter naming mismatch Kconfig: replace "--- help ---" with "---help---" c2port: fix bogus Kconfig "default no" edac: Fix spelling errors. qla1280: Remove redundant NULL check before release_firmware() call remoteproc: remove redundant NULL check before release_firmware() qla2xxx: Remove redundant NULL check before release_firmware() call. aic94xx: Get rid of redundant NULL check before release_firmware() call tehuti: delete redundant NULL check before release_firmware() qlogic: get rid of a redundant test for NULL before call to release_firmware() bna: remove redundant NULL test before release_firmware() tg3: remove redundant NULL test before release_firmware() call typhoon: get rid of redundant conditional before all to release_firmware() ... |
||
Eric W. Biederman
|
08cefc7ab8 |
userns: Convert ext4 to user kuid/kgid where appropriate
Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> |
||
|
Eric W. Biederman
|
1523299d58 |
userns: Convert ext3 to use kuid/kgid where appropriate
Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> |
||
Jan Kara
|
fd2cbd4dfa |
jbd: Write journal superblock with WRITE_FUA after checkpointing
If journal superblock is written only in disk's caches and other transaction starts reusing space of the transaction cleaned from the log, it can happen blocks of a new transaction reach the disk before journal superblock. When power failure happens in such case, subsequent journal replay would still try to replay the old transaction but some of it's blocks may be already overwritten by the new transaction. For this reason we must use WRITE_FUA when updating log tail and we must first write new log tail to disk and update in-memory information only after that. Signed-off-by: Jan Kara <jack@suse.cz> |
||
|
Jan Kara
|
9754e39c7b |
jbd: Split updating of journal superblock and marking journal empty
There are three case of updating journal superblock. In the first case, we want to mark journal as empty (setting s_sequence to 0), in the second case we want to update log tail, in the third case we want to update s_errno. Split these cases into separate functions. It makes the code slightly more straightforward and later patches will make the distinction even more important. Signed-off-by: Jan Kara <jack@suse.cz> |
||
|
Paul E. McKenney
|
21e52e1566 |
rcu: Make RCU_FAST_NO_HZ handle timer migration
The current RCU_FAST_NO_HZ assumes that timers do not migrate unless a CPU goes offline, in which case it assumes that the CPU will have to come out of dyntick-idle mode (cancelling the timer) in order to go offline. This is important because when RCU_FAST_NO_HZ permits a CPU to enter dyntick-idle mode despite having RCU callbacks pending, it posts a timer on that CPU to force a wakeup on that CPU. This wakeup ensures that the CPU will eventually handle the end of the grace period, including invoking its RCU callbacks. However, Pascal Chapperon's test setup shows that the timer handler rcu_idle_gp_timer_func() really does get invoked in some cases. This is problematic because this can cause the CPU that entered dyntick-idle mode despite still having RCU callbacks pending to remain in dyntick-idle mode indefinitely, which means that its RCU callbacks might never be invoked. This situation can result in grace-period delays or even system hangs, which matches Pascal's observations of slow boot-up and shutdown (https://lkml.org/lkml/2012/4/5/142). See also the bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=806548 This commit therefore causes the "should never be invoked" timer handler rcu_idle_gp_timer_func() to use smp_call_function_single() to wake up the CPU for which the timer was intended, allowing that CPU to invoke its RCU callbacks in a timely manner. Reported-by: Pascal Chapperon <pascal.chapperon@wanadoo.fr> Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> |
||
|
Jan Kara
|
cc1676d917 |
writeback: Move requeueing when I_SYNC set to writeback_sb_inodes()
When writeback_single_inode() is called on inode which has I_SYNC already set while doing WB_SYNC_NONE, inode is moved to b_more_io list. However this makes sense only if the caller is flusher thread. For other callers of writeback_single_inode() it doesn't really make sense and may be even wrong - flusher thread may be doing WB_SYNC_ALL writeback in parallel. So we move requeueing from writeback_single_inode() to writeback_sb_inodes(). Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> |
||
Arve Hjønnevåg
|
6791e36c4a |
PM / Sleep: Add wakeup_source_activate and wakeup_source_deactivate tracepoints
Add tracepoints to wakeup_source_activate and wakeup_source_deactivate. Useful for checking that specific wakeup sources overlap as expected. Signed-off-by: Arve Hjønnevåg <arve@android.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> |
||
|
Paul E. McKenney
|
2fdbb31b66 |
rcu: Add RCU_FAST_NO_HZ tracing for idle exit
Traces of rcu_prep_idle events can be confusing because rcu_cleanup_after_idle() does no tracing. This commit therefore adds this tracing. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> |
||
Liam Girdwood
|
c97f3bdd26 |
ASoC: dapm: Fix x86_64 build warning.
Fixes the following build warning on x86_64.
In file included from include/trace/ftrace.h:567:0,
from include/trace/define_trace.h:86,
from include/trace/events/asoc.h:410,
from sound/soc/soc-core.c:45:
include/trace/events/asoc.h: In function 'ftrace_raw_event_snd_soc_dapm_output_path':
include/trace/events/asoc.h:246:1: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
include/trace/events/asoc.h: In function 'ftrace_raw_event_snd_soc_dapm_input_path':
include/trace/events/asoc.h:275:1: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
||
|
Liam Girdwood
|
ec2e3031b6 |
ASoC: dapm: Add API call to query valid DAPM paths
In preparation for ASoC DSP support. Add a DAPM API call to determine whether a DAPM audio path is valid between source and sink widgets. This also takes into account all kcontrol mux and mixer settings in between the source and sink widgets to validate the audio path. This will be used by the DSP core to determine the runtime DAI mappings between FE and BE DAIs in order to run PCM operations. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> |
||
|
Jan Kara
|
2db938bee3 |
jbd: Refine commit writeout logic
Currently we write out all journal buffers in WRITE_SYNC mode. This improves performance for fsync heavy workloads but hinders performance when writes are mostly asynchronous, most noticably it slows down readers and users complain about slow desktop response etc. So submit writes as asynchronous in the normal case and only submit writes as WRITE_SYNC if we detect someone is waiting for current transaction commit. I've gathered some numbers to back this change. The first is the read latency test. It measures time to read 1 MB after several seconds of sleeping in presence of streaming writes. Top 10 times (out of 90) in us: Before After 2131586 697473 1709932 557487 1564598 535642 1480462 347573 1478579 323153 1408496 222181 1388960 181273 1329565 181070 1252486 172832 1223265 172278 Average: 619377 82180 So the improvement in both maximum and average latency is massive. I've measured fsync throughput by: fs_mark -n 100 -t 1 -s 16384 -d /mnt/fsync/ -S 1 -L 4 in presence of streaming reader. The numbers (fsyncs/s) are: Before After 9.9 6.3 6.8 6.0 6.3 6.2 5.8 6.1 So fsync performance seems unharmed by this change. Signed-off-by: Jan Kara <jack@suse.cz> |
||
Stephen Boyd
|
b3aa1584e9 |
workqueue: Fix workqueue_execute_end() comment
workqueue_execute_end() is called after the callback function, not before. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz> |
||
|
Linus Torvalds
|
66cfb32772 |
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar. * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/p4: Add format attributes tracing, sched, vfs: Fix 'old_pid' usage in trace_sched_process_exec() |
||
Oleg Nesterov
|
6308191f6f |
tracing, sched, vfs: Fix 'old_pid' usage in trace_sched_process_exec()
1. TRACE_EVENT(sched_process_exec) forgets to actually use the old pid argument, it sets ->old_pid = p->pid. 2. search_binary_handler() uses the wrong pid number. tracepoint needs the global pid_t from the root namespace, while old_pid is the virtual pid number as it seen by the tracer/parent. With this patch we have two pid_t's in search_binary_handler(), not really nice. Perhaps we should switch to "struct pid*", but in this case it would be better to cleanup the current code first and move the "depth == 0" code outside. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: David Smith <dsmith@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Denys Vlasenko <dvlasenk@redhat.com> Link: http://lkml.kernel.org/r/20120330162636.GA4857@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |