Follow-up to commit 294d31e822 ("sony-laptop: don't change keyboard
backlight settings"): avoid messing up the state on resume. Leave it to
what was before suspending as it's anyway likely that we still don't
know what value we should write to the EC registers. This fix is also
required in 3.12
Cc: stable@vger.kernel.org
Tested-by: Karol Babioch <karol@babioch.de>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I just fixed this same bug in arch/powerpc/kernel/vio.c and took a quick
look for other similar errors in the kernel.
modalias_show() should return an empty string on error, not errno.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
This patch adds support for ipc command interrupt mode.
Also added platform data option to select 'irq_mode'
irq_mode = 1: configure the driver to receive IOC interrupt
for each successful ipc_command.
irq_mode = 0: makes driver use polling method to
track the command completion status.
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
SNDRV_CARDS can be specified via Kconfig since 3.11 kernel, so this
can be over 32bit integer range, which leads to a build error.
Cc: <stable@vger.kernel.org> [v3.11+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
It makes sense to split out the Chromebook/Chromebox hardware platform
drivers to a separate subdirectory, since some of it will be shared
between ARM and x86.
This moves over the existing chromeos_laptop driver without making
any other changes, and adds appropriate Kconfig entries for the new
directory. It also adds a MAINTAINERS entry for the new subdir.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Some HP BIOS has dummy WMI 0x05 cmd and it causes wireless set cmd to fail.
This patch fixes the problem by detecting "2009 BIOS or later" flag which
determines whether WMI 0x1b is supported and is used to replace WMI 0x05.
Signed-off-by: Alex Hung <alex.hung@canonical.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Emitting an OOM message isn't necessary after input_allocate_device
as there's a generic OOM and a dump_stack already done.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Some BIOS versions/Vaio models apparently ship with two nearly identical
functions to handle backlight related controls.
The only difference seems to be:
If (LEqual (BUF1, 0x40))
{
Store (0x40, P80H)
Store (BUF2, Local0)
- And (Local0, One, Local0)
+ And (Local0, 0x03, Local0)
Store (Local0, ^^H_EC.KLPC)
}
Avoid erroring out on initialization and messing things up on cleanup
for now since we never call into these methods with anything different
than 1 or 0.
This issue was found on a Sony VPCSE1V9E/BIOS R2087H4.
Cc: Marco Krüger <krgsch@gmail.com>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
All my testing has been on laptops with a hw killswitch, so to be on the
safe side disable rfkill functionality on models without a hw killswitch for
now. Once we gather some feedback on laptops without a hw killswitch this
decision maybe reconsidered.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Setting force_rfkill will cause the dell-laptop rfkill code to skip its
whitelist checks, this will allow individual users to override the whitelist,
as well as to gather info from users to improve the checks.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Some time is needed for the BIOS to do its work, but 250ms should be plenty.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Instead when hw-blocked always write 1 to the blocked bit for the radio in
question. This is necessary to properly set all the blocked bits for hw-switch
controlled radios to 1 after power-on and resume.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
This is necessary for 3 reasons:
1) To apply sw_state changes made while hw-blocked
2) To set all the blocked bits for hw-switch controlled radios to 1 when the
switch gets changed to off, this is necessary on some models to actually
turn the radio status LEDs off.
3) On some models non hw-switch controlled radios will have their block bit
cleared (potentially undoing a soft-block) on hw-switch toggle, this
restores the sw-block in this case.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
This makes dell-laptop's rfkill code consistent with other drivers which
allow sw_state changes while hw blocked.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
On machines with a hardware switch, the blocking settings can not be changed
through a Fn + wireless-key combo, so there is no reason to read back the
blocking state from the BIOS.
Reading back is not only not necessary it is actually harmful, since on some
machines the blocking state will be cleared to all 0 after a wireless switch
toggle, even for radios not controlled by the hw-switch (yeah firmware bugs).
This causes "magic" changes to the sw_state. This is inconsistent with other
rfkill drivers which preserve the sw_state over a hw kill on / off.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The query callback should only update the hw_state, see the comment in
net/rfkill/core.c in rfkill_set_block, which is its only caller.
rfkill_set_block will modify the sw_state directly after calling query so
calling set_sw_state is an expensive NOP.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
To ensure we don't enter any hw-switch related code paths on machines without
a hw-switch.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
The rfkill functionality was removed from the dell-laptop driver because it
was causing problems on various non Latitude models, and the blacklist kept
growing and growing. In the thread discussing this Dell mentioned that they
only QA the rfkill acpi interface on Latitudes and indeed there have been
no blacklist entries for Latitudes.
Note that the blacklist contained no Vostros either, and most Vostros have
a hardware switch too, so we could consider supporting Vostros with a
hardware switch too.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Without rfkill functionality in dell-laptop I have the following problems:
-If the hardware radio switch is set to disable the radio, then userspace
will still think it can use wireless and bluetooth.
-The wwan / 3g modem cannot be soft blocked without the dell-laptop rfkill
functionality
I know the rfkill functionality was removed from the dell-laptop driver because
it caused more problems then it fixed, and the blacklist for it was growing out
of control.
But in the thread discussing this Dell mentioned that they only QA the rfkill
acpi interface on Latitudes and indeed there have been no blacklist entries
for Latitudes. Therefor I would like to bring the rfkill functionality back
only for Latitudes. This patch is a straight-forward revert. The next patch
in this set will drop the blacklist and replace it with a Latitude check.
This reverts commit a6c2390cd6.
Conflicts:
drivers/platform/x86/dell-laptop.c
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
