Pull clocksource/clockevent updates from Daniel Lezcano:
* Axel Lin removed an unused structure defining the ids for the
bcm kona driver.
* Ezequiel Garcia enabled the timer divider only when the 25MHz
timer is not used for the armada 370 XP.
* Jingoo Han removed a pointless platform data initialization for
the sh_mtu and sh_mtu2.
* Laurent Pinchart added the clk_prepare/clk_unprepare for sh_cmt.
* Linus Walleij added a useful warning in clk_of when no clocks
are found while the old behavior was to silently hang at boot time.
* Maxime Ripard added the high speed timer drivers for the
Allwinner SoCs (A10, A13, A20). He increased the rating, shared the
irq across all available cpus and fixed the clockevent's irq
initialization for the sun4i.
* Michael Opdenacker removed the usage of the IRQF_DISABLED for the
all the timers driver located in drivers/clocksource.
* Stephen Boyd switched to sched_clock_register for the
arm_global_timer, cadence_ttc, sun4i and orion timers.
Conflicts:
drivers/clocksource/clksrc-of.c
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When the kernel is compiled with:
CONFIG_HIGH_RES_TIMERS=no
CONFIG_HZ_PERIODIC=yes
CONFIG_DEBUG_ATOMIC_SLEEP=yes
The following WARN appears:
WARNING: CPU: 1 PID: 0 at linux/kernel/mutex.c:856 mutex_trylock+0x70/0x1fc()
DEBUG_LOCKS_WARN_ON(in_interrupt())
Modules linked in:
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.12.0-xilinx-dirty #93
[<c0014a78>] (unwind_backtrace+0x0/0x11c) from [<c0011b6c>] (show_stack+0x10/0x14)
[<c0011b6c>] (show_stack+0x10/0x14) from [<c039120c>] (dump_stack+0x7c/0xc0)
[<c039120c>] (dump_stack+0x7c/0xc0) from [<c001fda4>] (warn_slowpath_common+0x60/0x84)
[<c001fda4>] (warn_slowpath_common+0x60/0x84) from [<c001fe48>] (warn_slowpath_fmt+0x2c/0x3c)
[<c001fe48>] (warn_slowpath_fmt+0x2c/0x3c) from [<c0392658>] (mutex_trylock+0x70/0x1fc)
[<c0392658>] (mutex_trylock+0x70/0x1fc) from [<c02dfc08>] (clk_prepare_lock+0xc/0xe4)
[<c02dfc08>] (clk_prepare_lock+0xc/0xe4) from [<c02e099c>] (clk_get_rate+0xc/0x44)
[<c02e099c>] (clk_get_rate+0xc/0x44) from [<c02d0394>] (ttc_set_mode+0x34/0x78)
[<c02d0394>] (ttc_set_mode+0x34/0x78) from [<c005f794>] (clockevents_set_mode+0x28/0x5c)
[<c005f794>] (clockevents_set_mode+0x28/0x5c) from [<c00607fc>] (tick_broadcast_on_off+0x190/0x1c0)
[<c00607fc>] (tick_broadcast_on_off+0x190/0x1c0) from [<c005f168>] (clockevents_notify+0x58/0x1ac)
[<c005f168>] (clockevents_notify+0x58/0x1ac) from [<c02b99dc>] (cpuidle_setup_broadcast_timer+0x20/0x24)
[<c02b99dc>] (cpuidle_setup_broadcast_timer+0x20/0x24) from [<c006cd04>] (generic_smp_call_function_single_interrupt+0)
[<c006cd04>] (generic_smp_call_function_single_interrupt+0xe0/0x130) from [<c00138c8>] (handle_IPI+0x88/0x118)
[<c00138c8>] (handle_IPI+0x88/0x118) from [<c0008504>] (gic_handle_irq+0x58/0x60)
[<c0008504>] (gic_handle_irq+0x58/0x60) from [<c0012644>] (__irq_svc+0x44/0x78)
Exception stack(0xef099fa0 to 0xef099fe8)
9fa0: 00000001 ef092100 00000000 ef092100 ef098000 00000015 c0399f2c c0579d74
9fc0: 0000406a 413fc090 00000000 00000000 00000000 ef099fe8 c00666ec c000f46c
9fe0: 20000113 ffffffff
[<c0012644>] (__irq_svc+0x44/0x78) from [<c000f46c>] (arch_cpu_idle+0x34/0x3c)
[<c000f46c>] (arch_cpu_idle+0x34/0x3c) from [<c0053980>] (cpu_startup_entry+0xa8/0x10c)
[<c0053980>] (cpu_startup_entry+0xa8/0x10c) from [<000085a4>] (0x85a4)
We are in an interrupt context (IPI) and we are calling clk_get_rate in the
set_mode function which in turn ends up by getting a mutex... Even if that
does not hang, it is a potential kernel deadlock.
It is not allowed to call clk_get_rate() from interrupt context. To
avoid such calls the timer input frequency is stored in the driver's
data struct which makes it accessible to the driver in any context.
[dlezcano] completed the changelog with the WARN trace and added a more
detailed description. Tested on zync zc702.
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
bcm_timer_ids is no longer used after converting to CLOCKSOURCE_OF_DECLARE.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
This patch removes the use of the IRQF_DISABLED flag.
It's a NOOP since 2.6.35 and it will be removed one day.
[dlezcano] : slightly changed the changelog
Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
This patch removes the use of the IRQF_DISABLED flag.
It's a NOOP since 2.6.35 and it will be removed one day.
[dlezcano] : slightly changed the changelog
Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
This patch removes the use of the IRQF_DISABLED flag
It's a NOOP since 2.6.35 and it will be removed one day.
[dlezcano] : slightly changed the changelog
Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The current code sets the timer divider bits always. However, when
the 25 MHz timer is enabled, this is not needed and has no effect.
As this causes some confusion, rework the code so the divider is
set only when needed, i.e. when the 25 MHz timer is not in use.
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Many platforms rely on clocksource_of_init() being implicitly
called for registering clock sources and will get zero warnings
if no working clock source is available. Let's print a critical
error message if no clock source is found.
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The 32 bit sched_clock interface now supports 64 bits. Upgrade to
the 64 bit function to allow us to remove the 32 bit registration
interface. While we're here, mark the sched_clock function as
notrace to prevent ftrace recursion crashes.
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The 32 bit sched_clock interface now supports 64 bits. Upgrade to
the 64 bit function to allow us to remove the 32 bit registration
interface. While we're here increase the number of bits that
sched_clock can handle to 64 to make full use of the counter.
Cc: Stuart Menefy <stuart.menefy@st.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Acked-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Most of the Allwinner SoCs (at this time, all but the A10) also have a
High Speed timers that are not using the 24MHz oscillator as a source
but rather the AHB clock running much faster.
The IP is slightly different between the A10s/A13 and the one used in
the A20/A31, since the latter have 4 timers available, while the former
have only 2 of them.
[dlezcano] : Fixed conflict with b788beda "Order Kconfig options
alphabetically"
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Tested-by: Emilio López <emilio@elopez.com.ar>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
We want to keep this driver as the default provider of the clock events
and source, yet some other driver might fit in the "desired" category of
ratings. Hence, we need to increase a bit the rating so that we can have
more flexibility in the ratings we choose.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Tested-by: Emilio López <emilio@elopez.com.ar>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The interrupt for the timer is a shared processor interrupt, so any CPU
found in the system can handle it. Switch to our cpumask to
cpu_possible_mask instead of cpumask_of(0).
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
The clock event structure irq field was not filled previously to the
interrupt we're using.
This was resulting in the timer not being used at all when using a
configuration with SMP enabled on a system with several CPUs, and with
the cpumask set to the cpu_possible_mask.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
In commit 620f5e1cbf (dts: Rename DW APB timer compatible strings), both
"snps,dw-apb-timer-sp" and "snps,dw-apb-timer-osc" were deprecated in place
of "snps,dw-apb-timer". But the driver also needs to be udpated in order to
support this new binding "snps,dw-apb-timer".
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The read_sched_clock should return the ~value because the clock is a
countdown implementation. read_sched_clock() should be the same as
__apbt_read_clocksource().
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The sun4i timer can still be ticking when we enable the interrupt.
If another timer is actually used (A7 architected timer, for example),
odds are that the interrupt will eventually fire with the event_handler
pointer being NULL.
The obvious fix it to stop the timer before registering the interrupt.
Observed and tested on sun7i (cubietruck).
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
