We export send_sigqueue() and send_group_sigqueue() for the only user,
posix_timer_event(). This is a bit silly, because both are just trivial
helpers on top of do_send_sigqueue() and because the we pass the unused
.si_signo parameter.
Kill them both, rename do_send_sigqueue() to send_sigqueue(), and export it.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested by Pavel Emelyanov.
send_sigqueue/send_group_sigqueue are only differ in how they lock ->siglock.
Unify them. send_group_sigqueue() uses spin_lock() because it knows the task
can't exit, but in that case lock_task_sighand() can't fail and doesn't hurt.
Note that the "sig" argument is ignored, it is always equal to ->si_signo.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Based on Pavel Emelyanov's suggestion.
Rename __group_complete_signal() to complete_signal() and use it to process
the specific signals too. To do this we simply add the "int group" argument.
This allows us to greatly simply the signal-sending code and adds a useful
behaviour change. We can avoid the unneeded wakeups for the private signals
because wants_signal() is more clever than sigismember(blocked), but more
importantly we now take into account the fatal specific signals too.
The latter allows us to kill some subtle checks in handle_stop_signal() and
makes the specific/group signal's behaviour more consistent. For example,
currently sigtimedwait(FATAL_SIGNAL) behaves differently depending on was the
signal sent by kill() or tkill() if the signal was not blocked.
And. This allows us to tweak/fix the behaviour when the specific signal is
sent to the dying/dead ->group_leader.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
send_signal() is used either with ->pending or with ->signal->shared_pending.
Change it to take "int group" instead, this argument will be re-used later.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested by Roland McGrath.
Initialize signal->curr_target in copy_signal(). This way ->curr_target is
never == NULL, we can kill the check in __group_complete_signal's hot path.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The comment in send_sig_info() is wrong, tasklist_lock can't help.
The caller must ensure the task can't go away, otherwise ->sighand can be NULL
even before we take the lock.
p->sighand could be changed by exec(), but I can't imagine how it is possible
to prevent exit(), but not exec().
Since the things seem to work, I assume all callers are correct. However,
drm_vbl_send_signals() looks broken. block_all_signals() which is solely used
by drm is definitely broken.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Convert do_tkill() to use rcu_read_lock() + lock_task_sighand() to avoid
taking tasklist lock.
Note that we don't return an error if lock_task_sighand() fails, we pretend
the task dies after receiving the signal. Otherwise, we should fight with the
nasty races with mt-exec without having any advantage.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move handle_stop_signal() into send_signal(). This factors out a couple of
callsites and allows us to do further unifications.
Also, with this change specific_send_sig_info() does handle_stop_signal().
Not that this is really important, we never send STOP/CONT via send_sig() and
friends, but still this looks more consistent.
The only (afaics) special case is get_signal_to_deliver(). If the traced task
dequeues SIGCONT, it can re-send it to itself after ptrace_stop() if the
signal was blocked by debugger. In that case handle_stop_signal() is
unnecessary, but hopefully not a problem.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
send_group_sigqueue() calls handle_stop_signal(), send_sigqueue() doesn't.
This is not consistent and in fact I'd say this is (minor) bug.
Move handle_stop_signal() from send_group_sigqueue() to do_send_sigqueue(),
the latter is called by send_sigqueue() too.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cache the values of current->signal/sighand. Shrinks .text a bit and makes
the code more readable. Also, remove "sigset_t *mask", it is pointless
because in fact we save the constant offset.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that handle_stop_signal() doesn't drop ->siglock, we can't see both
->group_stop_count && SIGNAL_STOP_STOPPED. Merge two "if" branches.
As Roland pointed out, we never actually needed 2 do_notify_parent_cldstop()
calls.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Previously handle_stop_signal(SIGCONT) could drop ->siglock. That is why
kill_pid_info(SIGCONT) takes tasklist_lock to make sure the target task can't
go away after unlock. Not needed now.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Based on discussion with Jiri and Roland.
In short: currently handle_stop_signal(SIGCONT, p) sends the notification to
p->parent, with this patch p itself notifies its parent when it becomes
running.
handle_stop_signal(SIGCONT) has to drop ->siglock temporary in order to notify
the parent with do_notify_parent_cldstop(). This leads to multiple problems:
- as Jiri Kosina pointed out, the stopped task can resume without
actually seeing SIGCONT which may have a handler.
- we race with another sig_kernel_stop() signal which may come in
that window.
- we race with sig_fatal() signals which may set SIGNAL_GROUP_EXIT
in that window.
- we can't avoid taking tasklist_lock() while sending SIGCONT.
With this patch handle_stop_signal() just sets the new SIGNAL_CLD_CONTINUED
flag in p->signal->flags and returns. The notification is sent by the first
task which returns from finish_stop() (there should be at least one) or any
other signalled thread from get_signal_to_deliver().
This is a user-visible change. Say, currently kill(SIGCONT, stopped_child)
can't return without seeing SIGCHLD, with this patch SIGCHLD can be delayed
unpredictably. Another difference is that if the child is ptraced by another
process, CLD_CONTINUED may be delivered to ->real_parent after ptrace_detach()
while currently it always goes to the tracer which doesn't actually need this
notification. Hopefully not a problem.
The patch asks for the futher obvious cleanups, I'll send them separately.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Every implementation of ->task_kill() does nothing when the signal comes from
the kernel. This is correct, but means that check_kill_permission() should
call security_task_kill() only for SI_FROMUSER() case, and we can remove the
same check from ->task_kill() implementations.
(sadly, check_kill_permission() is the last user of signal->session/__session
but we can't s/task_session_nr/task_session/ here).
NOTE: Eric W. Biederman pointed out cap_task_kill() should die, and I think
he is very right.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: David Quigley <dpquigl@tycho.nsa.gov>
Cc: Eric Paris <eparis@redhat.com>
Cc: Harald Welte <laforge@gnumonks.org>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Both functions do the same thing after proper locking, but with
different sigpending structs, so move the common code into a helper.
After this we have 4 places that look very similar: send_sigqueue: calls
do_send_sigqueue and signal_wakeup send_group_sigqueue: calls
do_send_sigqueue and __group_complete_signal __group_send_sig_info:
calls send_signal and __group_complete_signal specific_send_sig_info:
calls send_signal and signal_wakeup
Besides, send_signal performs actions similar to do_send_sigqueue's
and __group_complete_signal - to signal_wakeup.
It looks like they can be consolidated gracefully.
Oleg said:
Personally, I think this change is very good. But send_sigqueue() and
send_group_sigqueue() have a very subtle difference which I was never able
to understand.
Let's suppose that sigqueue is already queued, and the signal is ignored
(the latter means we should re-schedule cpu timer or handle overrruns). In
that case send_sigqueue() returns 0, but send_group_sigqueue() returns 1.
I think this is not the problem (in fact, I think this patch makes the
behaviour more correct), but I hope Thomas can take a look and confirm.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The signr variable may be declared without initialization - it is set ro the
return value from __dequeue_signal() right at the function beginning.
Besides, after recalc_sigpending() two checks for signr to be not 0 may be
merged into one. Both if-s become easier to read.
Thanks to Oleg for pointing out mistakes in the first version of this patch.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
