When __cpufreq_driver_target() in speedchange_task failed for some reason, the
policy->cur could be lower than the target_freq. The governor misses to change
the target_freq if the target_freq is equal to the next_freq at the next sample
time.
Added a check to prevent the CPU to stay at the speed that is lower than the
target_freq for long duration.
Change-Id: Ibfdcd193b8280390b8f8374a63218aa31267f310
Signed-off-by: Minsung Kim <ms925.kim@samsung.com>
The change is to compile on kernels where cpufreq stats are compiled as
a module (CONFIG_CPU_FREQ_STAT=m), because total_cpus is not exported for
module use.
Reported-By: Emilio López <elopez93@gmail.com>
Signed-off-by: Ruchi Kandoi <kandoiruchi@google.com>
Change-Id: I4f3c74f0fac5e8d9449655b26bf3b407b0fe4290
From: Cylen Yao <cylen.yao@mediatek.com>
common_tunables should be static.
Change-Id: I502ee3062bece5082fea7861eff2f6237e25cede
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Cpufreq time_in_state data for all CPUs is made persistent across
hotplug and exposed to userspace via sysfs file
/sys/devices/system/cpu/cpufreq/all_time_in_state
Change-Id: I97cb5de24b6de16189bf8b5df9592d0a6e6ddf32
Signed-off-by: Ruchi Kandoi <kandoiruchi@google.com>
hispeed_freq from a lower frequency.
When the load was below go_hispeed_load, there is a possibility that
choose_freq() would return a frequency which would be higher than the
hispeed_freq. According to the policy we should first jump to the
hispeed_freq, stay there for above_hispeed_delay and then be allowed to
raise higher than that.
Added a check to prevent the frequency to be directly raised to
something higher than the hispeed_freq.
Change-Id: Icda5d848dd9beadcc18835082ddf269732c75bd0
Signed-off-by: Ruchi Kandoi <kandoiruchi@google.com>
The cpufreq_interactive_timer gets cancelled and rescheduled
whenever the cpufreq_policy is changed. When the cpufreq policy is
changed at a rate faster than the sampling_rate of the interactive
governor, then the governor misses to change the target frequency
for long duration. The patch removes the need of cancelling the
timers when policy->min is changed.
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Change-Id: Ibd98d151e1c73b8bd969484583ff98ee9f1135ef
Clear ->cur_policy when stopping a governor, or the ->cur_policy
pointer may be stale on systems with have_governor_per_policy when a
new policy is allocated due to CPU hotplug offline/online.
[rjw: Changelog]
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Jacob Shin <jacob.shin@amd.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
get_governor_parent_kobj() can be used by any governor, generic
cpufreq governors or platform specific ones and so must be present in
cpufreq.c instead of cpufreq_governor.c.
This patch moves it to cpufreq.c. This also adds
EXPORT_SYMBOL_GPL(get_governor_parent_kobj) so that modules can use
this function too.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch adds: EXPORT_SYMBOL_GPL(have_governor_per_policy), so that
this routine can be used by modules too.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
sysfs ops for target_loads and above_hispeed_delay can be called before
initializing tunables at CPUFREQ_GOV_POLICY_INIT. Create sysfs entries after
initialization.
Change-Id: I50356198d7629731c0d32a3066d61fe8354e0001
Signed-off-by: Minsung Kim <ms925.kim@samsung.com>
The gcc warns like:
cpufreq_interactive.c:745:6: warning: operation on 'ret' may be undefined [-Wsequence-point]
It was introduced by commit cf0fad49d1.
Since sprintf(...) just return 1 (one character) in this case, ret should not changed.
Just discarding the result of sprintf(...) leads to the result that
the committer of cf0fad49d1 wants.
Change-Id: Ifed1cef6d6a31c3ed23dad03a567b3b9eddf3a57
Signed-off-by: Chih-Wei Huang <cwhuang@android-x86.org>
Make sure that timers cpu_timer and cpu_slack_timer
deactivated before addition of new.
Change-Id: If31c4049606871df6f00efdc24b1d713c86a6f69
Signed-off-by: Shridhar Rasal <srasal@nvidia.com>
Signed-off-by: Bharat Nihalani <bnihalani@nvidia.com>
If we have a multi-package system, where we have multiple instances of struct
policy (per package), currently we can't have multiple instances of same
governor. i.e. We can't have multiple instances of Interactive governor for
multiple packages.
This is a bottleneck for multicluster system, where we want different packages
to use Interactive governor, but with different tunables.
This patch uses the infrastructure provided by earlier patches pushed in
Mainline in v3.10-rc1/rc2 and implements per policy instances of Interactive
governor.
Change-Id: I70436d4a5a45c6cb6edf37f3e46d0b9fbc930982
[toddpoynor@google.com: merge with later code, minor changes]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This moves definition of cpufreq_gov_interactive towards the bottom of file, so
that we don't have to add prototype of cpufreq_governor_interactive() in the
beginning of file.
Change-Id: I04bd1004954eb36502c5cd7e35d3d7274cddaf95
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cpufreq no longer calls governor callback for offlined cpus. i.e. All
policy->cpus are guaranteed to be online. Hence we don't need explicit check to
see if cpu is online or not.
Change-Id: I9ad85ea4addd5b4a40952e59ed730dd15e328690
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Remove a trailing whitespace from target_loads and above_hispeed_delay. Problem
happens when user-space program tried to restore parameters that saved before
changing parameters. In this case was returned error(EINVAL).
Change-Id: I5a74e3824602cd6f2b74651adda5ec1b627e61e9
Signed-off-by: Minsung Kim <ms925.kim@samsung.com>
When the policy max freq is raised, and before the timer is
rescheduled in idle callback, the cpu freq may stuck at a
lower freq.
The target_freq shall be updated too, else on a high load
situation, the new_freq is always equal to target_freq and
which will cause freq stuck at a lower freq too.
Reschedule the timer on gov limits callback.
Change-Id: I6c187001ab43e859731429b64f75a74eebc37a24
Signed-off-by: Lianwei Wang <a22439@motorola.com>
The cpufreq TRANSTION notifier callback does not check the
governor_enabled state on affected CPUS, which will case
kernel panic in update_load because the policy object maybe
NULL or invalid when governor_enabled is false.
Change-Id: Ie0f1718124f61e2f9b5da57abc6981ada5b83908
Signed-off-by: Lianwei Wang <a22439@motorola.com>
Check for idle time delta less than elapsed time delta, avoid
underflow computing active time.
Change-Id: I3e4c6ef1ad794eec49ed379c0c50fa727fd6ad28
Signed-off-by: Minsung Kim <ms925.kim@samsung.com>
Reschedule load sampling timer after timestamp of sample start taken,
hold spinlock across entire sequence to avoid preemption. Avoid the
WARN for zero time delta in the load sampling timer function.
Change-Id: Idc10a756f09141decb6df92669521a1ebf0dbc10
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Add checks for error return from cpufreq_frequency_table_target, and be
less noisy on the existing call with an error check. CPU hotplug and
system shutdown may cause this call to return -EINVAL.
Bug: 8613560
Change-Id: Id78d8829920462c0db1c7e14e717d91740d6cb44
Signed-off-by: Todd Poynor <toddpoynor@google.com>
