Merge 3.13-rc5 into usb-next

This resolves the merge issue with drivers/usb/host/ohci-at91.c

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation/module-signing.txt

@@ -0,0 +1,240 @@
+			==============================
+			KERNEL MODULE SIGNING FACILITY
+			==============================
+
+CONTENTS
+
+ - Overview.
+ - Configuring module signing.
+ - Generating signing keys.
+ - Public keys in the kernel.
+ - Manually signing modules.
+ - Signed modules and stripping.
+ - Loading signed modules.
+ - Non-valid signatures and unsigned modules.
+ - Administering/protecting the private key.
+
+
+========
+OVERVIEW
+========
+
+The kernel module signing facility cryptographically signs modules during
+installation and then checks the signature upon loading the module.  This
+allows increased kernel security by disallowing the loading of unsigned modules
+or modules signed with an invalid key.  Module signing increases security by
+making it harder to load a malicious module into the kernel.  The module
+signature checking is done by the kernel so that it is not necessary to have
+trusted userspace bits.
+
+This facility uses X.509 ITU-T standard certificates to encode the public keys
+involved.  The signatures are not themselves encoded in any industrial standard
+type.  The facility currently only supports the RSA public key encryption
+standard (though it is pluggable and permits others to be used).  The possible
+hash algorithms that can be used are SHA-1, SHA-224, SHA-256, SHA-384, and
+SHA-512 (the algorithm is selected by data in the signature).
+
+
+==========================
+CONFIGURING MODULE SIGNING
+==========================
+
+The module signing facility is enabled by going to the "Enable Loadable Module
+Support" section of the kernel configuration and turning on
+
+	CONFIG_MODULE_SIG	"Module signature verification"
+
+This has a number of options available:
+
+ (1) "Require modules to be validly signed" (CONFIG_MODULE_SIG_FORCE)
+
+     This specifies how the kernel should deal with a module that has a
+     signature for which the key is not known or a module that is unsigned.
+
+     If this is off (ie. "permissive"), then modules for which the key is not
+     available and modules that are unsigned are permitted, but the kernel will
+     be marked as being tainted.
+
+     If this is on (ie. "restrictive"), only modules that have a valid
+     signature that can be verified by a public key in the kernel's possession
+     will be loaded.  All other modules will generate an error.
+
+     Irrespective of the setting here, if the module has a signature block that
+     cannot be parsed, it will be rejected out of hand.
+
+
+ (2) "Automatically sign all modules" (CONFIG_MODULE_SIG_ALL)
+
+     If this is on then modules will be automatically signed during the
+     modules_install phase of a build.  If this is off, then the modules must
+     be signed manually using:
+
+	scripts/sign-file
+
+
+ (3) "Which hash algorithm should modules be signed with?"
+
+     This presents a choice of which hash algorithm the installation phase will
+     sign the modules with:
+
+	CONFIG_SIG_SHA1		"Sign modules with SHA-1"
+	CONFIG_SIG_SHA224	"Sign modules with SHA-224"
+	CONFIG_SIG_SHA256	"Sign modules with SHA-256"
+	CONFIG_SIG_SHA384	"Sign modules with SHA-384"
+	CONFIG_SIG_SHA512	"Sign modules with SHA-512"
+
+     The algorithm selected here will also be built into the kernel (rather
+     than being a module) so that modules signed with that algorithm can have
+     their signatures checked without causing a dependency loop.
+
+
+=======================
+GENERATING SIGNING KEYS
+=======================
+
+Cryptographic keypairs are required to generate and check signatures.  A
+private key is used to generate a signature and the corresponding public key is
+used to check it.  The private key is only needed during the build, after which
+it can be deleted or stored securely.  The public key gets built into the
+kernel so that it can be used to check the signatures as the modules are
+loaded.
+
+Under normal conditions, the kernel build will automatically generate a new
+keypair using openssl if one does not exist in the files:
+
+	signing_key.priv
+	signing_key.x509
+
+during the building of vmlinux (the public part of the key needs to be built
+into vmlinux) using parameters in the:
+
+	x509.genkey
+
+file (which is also generated if it does not already exist).
+
+It is strongly recommended that you provide your own x509.genkey file.
+
+Most notably, in the x509.genkey file, the req_distinguished_name section
+should be altered from the default:
+
+	[ req_distinguished_name ]
+	O = Magrathea
+	CN = Glacier signing key
+	emailAddress = slartibartfast@magrathea.h2g2
+
+The generated RSA key size can also be set with:
+
+	[ req ]
+	default_bits = 4096
+
+
+It is also possible to manually generate the key private/public files using the
+x509.genkey key generation configuration file in the root node of the Linux
+kernel sources tree and the openssl command.  The following is an example to
+generate the public/private key files:
+
+	openssl req -new -nodes -utf8 -sha256 -days 36500 -batch -x509 \
+	   -config x509.genkey -outform DER -out signing_key.x509 \
+	   -keyout signing_key.priv
+
+
+=========================
+PUBLIC KEYS IN THE KERNEL
+=========================
+
+The kernel contains a ring of public keys that can be viewed by root.  They're
+in a keyring called ".system_keyring" that can be seen by:
+
+	[root@deneb ~]# cat /proc/keys
+	...
+	223c7853 I------     1 perm 1f030000     0     0 keyring   .system_keyring: 1
+	302d2d52 I------     1 perm 1f010000     0     0 asymmetri Fedora kernel signing key: d69a84e6bce3d216b979e9505b3e3ef9a7118079: X509.RSA a7118079 []
+	...
+
+Beyond the public key generated specifically for module signing, any file
+placed in the kernel source root directory or the kernel build root directory
+whose name is suffixed with ".x509" will be assumed to be an X.509 public key
+and will be added to the keyring.
+
+Further, the architecture code may take public keys from a hardware store and
+add those in also (e.g. from the UEFI key database).
+
+Finally, it is possible to add additional public keys by doing:
+
+	keyctl padd asymmetric "" [.system_keyring-ID] <[key-file]
+
+e.g.:
+
+	keyctl padd asymmetric "" 0x223c7853 <my_public_key.x509
+
+Note, however, that the kernel will only permit keys to be added to
+.system_keyring _if_ the new key's X.509 wrapper is validly signed by a key
+that is already resident in the .system_keyring at the time the key was added.
+
+
+=========================
+MANUALLY SIGNING MODULES
+=========================
+
+To manually sign a module, use the scripts/sign-file tool available in
+the Linux kernel source tree.  The script requires 4 arguments:
+
+	1.  The hash algorithm (e.g., sha256)
+	2.  The private key filename
+	3.  The public key filename
+	4.  The kernel module to be signed
+
+The following is an example to sign a kernel module:
+
+	scripts/sign-file sha512 kernel-signkey.priv \
+		kernel-signkey.x509 module.ko
+
+The hash algorithm used does not have to match the one configured, but if it
+doesn't, you should make sure that hash algorithm is either built into the
+kernel or can be loaded without requiring itself.
+
+
+============================
+SIGNED MODULES AND STRIPPING
+============================
+
+A signed module has a digital signature simply appended at the end.  The string
+"~Module signature appended~." at the end of the module's file confirms that a
+signature is present but it does not confirm that the signature is valid!
+
+Signed modules are BRITTLE as the signature is outside of the defined ELF
+container.  Thus they MAY NOT be stripped once the signature is computed and
+attached.  Note the entire module is the signed payload, including any and all
+debug information present at the time of signing.
+
+
+======================
+LOADING SIGNED MODULES
+======================
+
+Modules are loaded with insmod, modprobe, init_module() or finit_module(),
+exactly as for unsigned modules as no processing is done in userspace.  The
+signature checking is all done within the kernel.
+
+
+=========================================
+NON-VALID SIGNATURES AND UNSIGNED MODULES
+=========================================
+
+If CONFIG_MODULE_SIG_FORCE is enabled or enforcemodulesig=1 is supplied on
+the kernel command line, the kernel will only load validly signed modules
+for which it has a public key.   Otherwise, it will also load modules that are
+unsigned.   Any module for which the kernel has a key, but which proves to have
+a signature mismatch will not be permitted to load.
+
+Any module that has an unparseable signature will be rejected.
+
+
+=========================================
+ADMINISTERING/PROTECTING THE PRIVATE KEY
+=========================================
+
+Since the private key is used to sign modules, viruses and malware could use
+the private key to sign modules and compromise the operating system.  The
+private key must be either destroyed or moved to a secure location and not kept
+in the root node of the kernel source tree.

Documentation/networking/ip-sysctl.txt

@@ -16,8 +16,12 @@ ip_default_ttl - INTEGER
 	Default: 64 (as recommended by RFC1700)
 
 ip_no_pmtu_disc - BOOLEAN
-	Disable Path MTU Discovery.
-	default FALSE
+	Disable Path MTU Discovery. If enabled and a
+	fragmentation-required ICMP is received, the PMTU to this
+	destination will be set to min_pmtu (see below). You will need
+	to raise min_pmtu to the smallest interface MTU on your system
+	manually if you want to avoid locally generated fragments.
+	Default: FALSE
 
 min_pmtu - INTEGER
 	default 552 - minimum discovered Path MTU

MAINTAINERS

@@ -1008,6 +1008,8 @@ M:	Santosh Shilimkar <santosh.shilimkar@ti.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-keystone/
+F:	drivers/clk/keystone/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone.git
 
 ARM/LOGICPD PXA270 MACHINE SUPPORT
 M:	Lennert Buytenhek <kernel@wantstofly.org>
@@ -3761,9 +3763,11 @@ F:	include/uapi/linux/gigaset_dev.h
 
 GPIO SUBSYSTEM
 M:	Linus Walleij <linus.walleij@linaro.org>
-S:	Maintained
+M:	Alexandre Courbot <gnurou@gmail.com>
 L:	linux-gpio@vger.kernel.org
-F:	Documentation/gpio.txt
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio.git
+S:	Maintained
+F:	Documentation/gpio/
 F:	drivers/gpio/
 F:	include/linux/gpio*
 F:	include/asm-generic/gpio.h
@@ -3831,6 +3835,12 @@ T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
 F:	drivers/media/usb/gspca/
 
+GUID PARTITION TABLE (GPT)
+M:	Davidlohr Bueso <davidlohr@hp.com>
+L:	linux-efi@vger.kernel.org
+S:	Maintained
+F:	block/partitions/efi.*
+
 STK1160 USB VIDEO CAPTURE DRIVER
 M:	Ezequiel Garcia <elezegarcia@gmail.com>
 L:	linux-media@vger.kernel.org
@@ -5911,12 +5921,21 @@ M:	Steffen Klassert <steffen.klassert@secunet.com>
 M:	Herbert Xu <herbert@gondor.apana.org.au>
 M:	"David S. Miller" <davem@davemloft.net>
 L:	netdev@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next.git
 S:	Maintained
 F:	net/xfrm/
 F:	net/key/
 F:	net/ipv4/xfrm*
+F:	net/ipv4/esp4.c
+F:	net/ipv4/ah4.c
+F:	net/ipv4/ipcomp.c
+F:	net/ipv4/ip_vti.c
 F:	net/ipv6/xfrm*
+F:	net/ipv6/esp6.c
+F:	net/ipv6/ah6.c
+F:	net/ipv6/ipcomp6.c
+F:	net/ipv6/ip6_vti.c
 F:	include/uapi/linux/xfrm.h
 F:	include/net/xfrm.h
 
@@ -9571,7 +9590,7 @@ F:	drivers/xen/*swiotlb*
 
 XFS FILESYSTEM
 P:	Silicon Graphics Inc
-M:	Dave Chinner <dchinner@fromorbit.com>
+M:	Dave Chinner <david@fromorbit.com>
 M:	Ben Myers <bpm@sgi.com>
 M:	xfs@oss.sgi.com
 L:	xfs@oss.sgi.com

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 13
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc5
 NAME = One Giant Leap for Frogkind
 
 # *DOCUMENTATION*
@@ -732,19 +732,15 @@ export mod_strip_cmd
 # Select initial ramdisk compression format, default is gzip(1).
 # This shall be used by the dracut(8) tool while creating an initramfs image.
 #
-INITRD_COMPRESS=gzip
-ifeq ($(CONFIG_RD_BZIP2), y)
-        INITRD_COMPRESS=bzip2
-else ifeq ($(CONFIG_RD_LZMA), y)
-        INITRD_COMPRESS=lzma
-else ifeq ($(CONFIG_RD_XZ), y)
-        INITRD_COMPRESS=xz
-else ifeq ($(CONFIG_RD_LZO), y)
-        INITRD_COMPRESS=lzo
-else ifeq ($(CONFIG_RD_LZ4), y)
-        INITRD_COMPRESS=lz4
-endif
-export INITRD_COMPRESS
+INITRD_COMPRESS-y                  := gzip
+INITRD_COMPRESS-$(CONFIG_RD_BZIP2) := bzip2
+INITRD_COMPRESS-$(CONFIG_RD_LZMA)  := lzma
+INITRD_COMPRESS-$(CONFIG_RD_XZ)    := xz
+INITRD_COMPRESS-$(CONFIG_RD_LZO)   := lzo
+INITRD_COMPRESS-$(CONFIG_RD_LZ4)   := lz4
+# do not export INITRD_COMPRESS, since we didn't actually
+# choose a sane default compression above.
+# export INITRD_COMPRESS := $(INITRD_COMPRESS-y)
 
 ifdef CONFIG_MODULE_SIG_ALL
 MODSECKEY = ./signing_key.priv

arch/arc/include/uapi/asm/unistd.h

@@ -8,7 +8,11 @@
 
 /******** no-legacy-syscalls-ABI *******/
 
-#ifndef _UAPI_ASM_ARC_UNISTD_H
+/*
+ * Non-typical guard macro to enable inclusion twice in ARCH sys.c
+ * That is how the Generic syscall wrapper generator works
+ */
+#if !defined(_UAPI_ASM_ARC_UNISTD_H) || defined(__SYSCALL)
 #define _UAPI_ASM_ARC_UNISTD_H
 
 #define __ARCH_WANT_SYS_EXECVE
@@ -36,4 +40,6 @@ __SYSCALL(__NR_arc_gettls, sys_arc_gettls)
 #define __NR_sysfs		(__NR_arch_specific_syscall + 3)
 __SYSCALL(__NR_sysfs, sys_sysfs)
 
+#undef __SYSCALL
+
 #endif

arch/arm/boot/dts/r8a7790.dtsi

@@ -87,9 +87,9 @@
 		interrupts = <1 9 0xf04>;
 	};
 
-	gpio0: gpio@ffc40000 {
+	gpio0: gpio@e6050000 {
 		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
-		reg = <0 0xffc40000 0 0x2c>;
+		reg = <0 0xe6050000 0 0x50>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 4 0x4>;
 		#gpio-cells = <2>;
@@ -99,9 +99,9 @@
 		interrupt-controller;
 	};
 
-	gpio1: gpio@ffc41000 {
+	gpio1: gpio@e6051000 {
 		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
-		reg = <0 0xffc41000 0 0x2c>;
+		reg = <0 0xe6051000 0 0x50>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 5 0x4>;
 		#gpio-cells = <2>;
@@ -111,9 +111,9 @@
 		interrupt-controller;
 	};
 
-	gpio2: gpio@ffc42000 {
+	gpio2: gpio@e6052000 {
 		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
-		reg = <0 0xffc42000 0 0x2c>;
+		reg = <0 0xe6052000 0 0x50>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 6 0x4>;
 		#gpio-cells = <2>;
@@ -123,9 +123,9 @@
 		interrupt-controller;
 	};
 
-	gpio3: gpio@ffc43000 {
+	gpio3: gpio@e6053000 {
 		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
-		reg = <0 0xffc43000 0 0x2c>;
+		reg = <0 0xe6053000 0 0x50>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 7 0x4>;
 		#gpio-cells = <2>;
@@ -135,9 +135,9 @@
 		interrupt-controller;
 	};
 
-	gpio4: gpio@ffc44000 {
+	gpio4: gpio@e6054000 {
 		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
-		reg = <0 0xffc44000 0 0x2c>;
+		reg = <0 0xe6054000 0 0x50>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 8 0x4>;
 		#gpio-cells = <2>;
@@ -147,9 +147,9 @@
 		interrupt-controller;
 	};
 
-	gpio5: gpio@ffc45000 {
+	gpio5: gpio@e6055000 {
 		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
-		reg = <0 0xffc45000 0 0x2c>;
+		reg = <0 0xe6055000 0 0x50>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 9 0x4>;
 		#gpio-cells = <2>;

arch/arm/mach-omap2/display.c

@@ -101,13 +101,51 @@ static const struct omap_dss_hwmod_data omap4_dss_hwmod_data[] __initconst = {
 	{ "dss_hdmi", "omapdss_hdmi", -1 },
 };
 
+static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
+{
+	u32 enable_mask, enable_shift;
+	u32 pipd_mask, pipd_shift;
+	u32 reg;
+
+	if (dsi_id == 0) {
+		enable_mask = OMAP4_DSI1_LANEENABLE_MASK;
+		enable_shift = OMAP4_DSI1_LANEENABLE_SHIFT;
+		pipd_mask = OMAP4_DSI1_PIPD_MASK;
+		pipd_shift = OMAP4_DSI1_PIPD_SHIFT;
+	} else if (dsi_id == 1) {
+		enable_mask = OMAP4_DSI2_LANEENABLE_MASK;
+		enable_shift = OMAP4_DSI2_LANEENABLE_SHIFT;
+		pipd_mask = OMAP4_DSI2_PIPD_MASK;
+		pipd_shift = OMAP4_DSI2_PIPD_SHIFT;
+	} else {
+		return -ENODEV;
+	}
+
+	reg = omap4_ctrl_pad_readl(OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY);
+
+	reg &= ~enable_mask;
+	reg &= ~pipd_mask;
+
+	reg |= (lanes << enable_shift) & enable_mask;
+	reg |= (lanes << pipd_shift) & pipd_mask;
+
+	omap4_ctrl_pad_writel(reg, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY);
+
+	return 0;
+}
+
 static int omap_dsi_enable_pads(int dsi_id, unsigned lane_mask)
 {
+	if (cpu_is_omap44xx())
+		return omap4_dsi_mux_pads(dsi_id, lane_mask);
+
 	return 0;
 }
 
 static void omap_dsi_disable_pads(int dsi_id, unsigned lane_mask)
 {
+	if (cpu_is_omap44xx())
+		omap4_dsi_mux_pads(dsi_id, 0);
 }
 
 static int omap_dss_set_min_bus_tput(struct device *dev, unsigned long tput)

arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c

@@ -8,8 +8,6 @@
  * published by the Free Software Foundation.
 */
 
-#include <linux/clk-provider.h>
-#include <linux/irqchip.h>
 #include <linux/of_platform.h>
 
 #include <asm/mach/arch.h>
@@ -48,15 +46,9 @@ static void __init s3c64xx_dt_map_io(void)
 		panic("SoC is not S3C64xx!");
 }
 
-static void __init s3c64xx_dt_init_irq(void)
-{
-	of_clk_init(NULL);
-	samsung_wdt_reset_of_init();
-	irqchip_init();
-};
-
 static void __init s3c64xx_dt_init_machine(void)
 {
+	samsung_wdt_reset_of_init();
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
@@ -79,7 +71,6 @@ DT_MACHINE_START(S3C6400_DT, "Samsung S3C64xx (Flattened Device Tree)")
 	/* Maintainer: Tomasz Figa <tomasz.figa@gmail.com> */
 	.dt_compat	= s3c64xx_dt_compat,
 	.map_io		= s3c64xx_dt_map_io,
-	.init_irq	= s3c64xx_dt_init_irq,
 	.init_machine	= s3c64xx_dt_init_machine,
 	.restart        = s3c64xx_dt_restart,
 MACHINE_END

arch/arm/mach-shmobile/board-lager.c

@@ -245,7 +245,9 @@ static void __init lager_init(void)
 {
 	lager_add_standard_devices();
 
-	phy_register_fixup_for_id("r8a7790-ether-ff:01", lager_ksz8041_fixup);
+	if (IS_ENABLED(CONFIG_PHYLIB))
+		phy_register_fixup_for_id("r8a7790-ether-ff:01",
+					  lager_ksz8041_fixup);
 }
 
 static const char * const lager_boards_compat_dt[] __initconst = {

arch/arm/xen/enlighten.c

@@ -96,7 +96,7 @@ static int remap_pte_fn(pte_t *ptep, pgtable_t token, unsigned long addr,
 	struct remap_data *info = data;
 	struct page *page = info->pages[info->index++];
 	unsigned long pfn = page_to_pfn(page);
-	pte_t pte = pfn_pte(pfn, info->prot);
+	pte_t pte = pte_mkspecial(pfn_pte(pfn, info->prot));
 
 	if (map_foreign_page(pfn, info->fgmfn, info->domid))
 		return -EFAULT;
@@ -224,10 +224,10 @@ static int __init xen_guest_init(void)
 	}
 	if (of_address_to_resource(node, GRANT_TABLE_PHYSADDR, &res))
 		return 0;
-	xen_hvm_resume_frames = res.start >> PAGE_SHIFT;
+	xen_hvm_resume_frames = res.start;
 	xen_events_irq = irq_of_parse_and_map(node, 0);
 	pr_info("Xen %s support found, events_irq=%d gnttab_frame_pfn=%lx\n",
-			version, xen_events_irq, xen_hvm_resume_frames);
+			version, xen_events_irq, (xen_hvm_resume_frames >> PAGE_SHIFT));
 	xen_domain_type = XEN_HVM_DOMAIN;
 
 	xen_setup_features();

arch/arm64/include/asm/xen/page-coherent.h

@@ -23,25 +23,21 @@ static inline void xen_dma_map_page(struct device *hwdev, struct page *page,
 	     unsigned long offset, size_t size, enum dma_data_direction dir,
 	     struct dma_attrs *attrs)
 {
-	__generic_dma_ops(hwdev)->map_page(hwdev, page, offset, size, dir, attrs);
 }
 
 static inline void xen_dma_unmap_page(struct device *hwdev, dma_addr_t handle,
 		size_t size, enum dma_data_direction dir,
 		struct dma_attrs *attrs)
 {
-	__generic_dma_ops(hwdev)->unmap_page(hwdev, handle, size, dir, attrs);
 }
 
 static inline void xen_dma_sync_single_for_cpu(struct device *hwdev,
 		dma_addr_t handle, size_t size, enum dma_data_direction dir)
 {
-	__generic_dma_ops(hwdev)->sync_single_for_cpu(hwdev, handle, size, dir);
 }
 
 static inline void xen_dma_sync_single_for_device(struct device *hwdev,
 		dma_addr_t handle, size_t size, enum dma_data_direction dir)
 {
-	__generic_dma_ops(hwdev)->sync_single_for_device(hwdev, handle, size, dir);
 }
 #endif /* _ASM_ARM64_XEN_PAGE_COHERENT_H */

arch/arm64/kernel/ptrace.c

@@ -214,31 +214,29 @@ static int ptrace_hbp_fill_attr_ctrl(unsigned int note_type,
 {
 	int err, len, type, disabled = !ctrl.enabled;
 
-	if (disabled) {
-		len = 0;
-		type = HW_BREAKPOINT_EMPTY;
-	} else {
-		err = arch_bp_generic_fields(ctrl, &len, &type);
-		if (err)
-			return err;
+	attr->disabled = disabled;
+	if (disabled)
+		return 0;
 
-		switch (note_type) {
-		case NT_ARM_HW_BREAK:
-			if ((type & HW_BREAKPOINT_X) != type)
-				return -EINVAL;
-			break;
-		case NT_ARM_HW_WATCH:
-			if ((type & HW_BREAKPOINT_RW) != type)
-				return -EINVAL;
-			break;
-		default:
+	err = arch_bp_generic_fields(ctrl, &len, &type);
+	if (err)
+		return err;
+
+	switch (note_type) {
+	case NT_ARM_HW_BREAK:
+		if ((type & HW_BREAKPOINT_X) != type)
 			return -EINVAL;
-		}
+		break;
+	case NT_ARM_HW_WATCH:
+		if ((type & HW_BREAKPOINT_RW) != type)
+			return -EINVAL;
+		break;
+	default:
+		return -EINVAL;
 	}
 
 	attr->bp_len	= len;
 	attr->bp_type	= type;
-	attr->disabled	= disabled;
 
 	return 0;
 }

arch/powerpc/include/asm/kvm_book3s.h

@@ -192,6 +192,10 @@ extern void kvmppc_load_up_vsx(void);
 extern u32 kvmppc_alignment_dsisr(struct kvm_vcpu *vcpu, unsigned int inst);
 extern ulong kvmppc_alignment_dar(struct kvm_vcpu *vcpu, unsigned int inst);
 extern int kvmppc_h_pr(struct kvm_vcpu *vcpu, unsigned long cmd);
+extern void kvmppc_copy_to_svcpu(struct kvmppc_book3s_shadow_vcpu *svcpu,
+				 struct kvm_vcpu *vcpu);
+extern void kvmppc_copy_from_svcpu(struct kvm_vcpu *vcpu,
+				   struct kvmppc_book3s_shadow_vcpu *svcpu);
 
 static inline struct kvmppc_vcpu_book3s *to_book3s(struct kvm_vcpu *vcpu)
 {

arch/powerpc/include/asm/kvm_book3s_asm.h

@@ -79,6 +79,7 @@ struct kvmppc_host_state {
 	ulong vmhandler;
 	ulong scratch0;
 	ulong scratch1;
+	ulong scratch2;
 	u8 in_guest;
 	u8 restore_hid5;
 	u8 napping;
@@ -106,6 +107,7 @@ struct kvmppc_host_state {
 };
 
 struct kvmppc_book3s_shadow_vcpu {
+	bool in_use;
 	ulong gpr[14];
 	u32 cr;
 	u32 xer;

arch/powerpc/include/asm/opal.h

@@ -720,13 +720,13 @@ int64_t opal_pci_next_error(uint64_t phb_id, uint64_t *first_frozen_pe,
 int64_t opal_pci_poll(uint64_t phb_id);
 int64_t opal_return_cpu(void);
 
-int64_t opal_xscom_read(uint32_t gcid, uint32_t pcb_addr, uint64_t *val);
+int64_t opal_xscom_read(uint32_t gcid, uint32_t pcb_addr, __be64 *val);
 int64_t opal_xscom_write(uint32_t gcid, uint32_t pcb_addr, uint64_t val);
 
 int64_t opal_lpc_write(uint32_t chip_id, enum OpalLPCAddressType addr_type,
 		       uint32_t addr, uint32_t data, uint32_t sz);
 int64_t opal_lpc_read(uint32_t chip_id, enum OpalLPCAddressType addr_type,
-		      uint32_t addr, uint32_t *data, uint32_t sz);
+		      uint32_t addr, __be32 *data, uint32_t sz);
 int64_t opal_validate_flash(uint64_t buffer, uint32_t *size, uint32_t *result);
 int64_t opal_manage_flash(uint8_t op);
 int64_t opal_update_flash(uint64_t blk_list);

arch/powerpc/include/asm/switch_to.h

@@ -35,7 +35,7 @@ extern void giveup_vsx(struct task_struct *);
 extern void enable_kernel_spe(void);
 extern void giveup_spe(struct task_struct *);
 extern void load_up_spe(struct task_struct *);
-extern void switch_booke_debug_regs(struct thread_struct *new_thread);
+extern void switch_booke_debug_regs(struct debug_reg *new_debug);
 
 #ifndef CONFIG_SMP
 extern void discard_lazy_cpu_state(void);

arch/powerpc/kernel/asm-offsets.c

@@ -576,6 +576,7 @@ int main(void)
 	HSTATE_FIELD(HSTATE_VMHANDLER, vmhandler);
 	HSTATE_FIELD(HSTATE_SCRATCH0, scratch0);
 	HSTATE_FIELD(HSTATE_SCRATCH1, scratch1);
+	HSTATE_FIELD(HSTATE_SCRATCH2, scratch2);
 	HSTATE_FIELD(HSTATE_IN_GUEST, in_guest);
 	HSTATE_FIELD(HSTATE_RESTORE_HID5, restore_hid5);
 	HSTATE_FIELD(HSTATE_NAPPING, napping);

arch/powerpc/kernel/crash_dump.c

@@ -124,15 +124,15 @@ ssize_t copy_oldmem_page(unsigned long pfn, char *buf,
 void crash_free_reserved_phys_range(unsigned long begin, unsigned long end)
 {
 	unsigned long addr;
-	const u32 *basep, *sizep;
+	const __be32 *basep, *sizep;
 	unsigned int rtas_start = 0, rtas_end = 0;
 
 	basep = of_get_property(rtas.dev, "linux,rtas-base", NULL);
 	sizep = of_get_property(rtas.dev, "rtas-size", NULL);
 
 	if (basep && sizep) {
-		rtas_start = *basep;
-		rtas_end = *basep + *sizep;
+		rtas_start = be32_to_cpup(basep);
+		rtas_end = rtas_start + be32_to_cpup(sizep);
 	}
 
 	for (addr = begin; addr < end; addr += PAGE_SIZE) {

arch/powerpc/kernel/process.c

@@ -339,7 +339,7 @@ static void set_debug_reg_defaults(struct thread_struct *thread)
 #endif
 }
 
-static void prime_debug_regs(struct thread_struct *thread)
+static void prime_debug_regs(struct debug_reg *debug)
 {
 	/*
 	 * We could have inherited MSR_DE from userspace, since
@@ -348,22 +348,22 @@ static void prime_debug_regs(struct thread_struct *thread)
 	 */
 	mtmsr(mfmsr() & ~MSR_DE);
 
-	mtspr(SPRN_IAC1, thread->debug.iac1);
-	mtspr(SPRN_IAC2, thread->debug.iac2);
+	mtspr(SPRN_IAC1, debug->iac1);
+	mtspr(SPRN_IAC2, debug->iac2);
 #if CONFIG_PPC_ADV_DEBUG_IACS > 2
-	mtspr(SPRN_IAC3, thread->debug.iac3);
-	mtspr(SPRN_IAC4, thread->debug.iac4);
+	mtspr(SPRN_IAC3, debug->iac3);
+	mtspr(SPRN_IAC4, debug->iac4);
 #endif
-	mtspr(SPRN_DAC1, thread->debug.dac1);
-	mtspr(SPRN_DAC2, thread->debug.dac2);
+	mtspr(SPRN_DAC1, debug->dac1);
+	mtspr(SPRN_DAC2, debug->dac2);
 #if CONFIG_PPC_ADV_DEBUG_DVCS > 0
-	mtspr(SPRN_DVC1, thread->debug.dvc1);
-	mtspr(SPRN_DVC2, thread->debug.dvc2);
+	mtspr(SPRN_DVC1, debug->dvc1);
+	mtspr(SPRN_DVC2, debug->dvc2);
 #endif
-	mtspr(SPRN_DBCR0, thread->debug.dbcr0);
-	mtspr(SPRN_DBCR1, thread->debug.dbcr1);
+	mtspr(SPRN_DBCR0, debug->dbcr0);
+	mtspr(SPRN_DBCR1, debug->dbcr1);
 #ifdef CONFIG_BOOKE
-	mtspr(SPRN_DBCR2, thread->debug.dbcr2);
+	mtspr(SPRN_DBCR2, debug->dbcr2);
 #endif
 }
 /*
@@ -371,11 +371,11 @@ static void prime_debug_regs(struct thread_struct *thread)
  * debug registers, set the debug registers from the values
  * stored in the new thread.
  */
-void switch_booke_debug_regs(struct thread_struct *new_thread)
+void switch_booke_debug_regs(struct debug_reg *new_debug)
 {
 	if ((current->thread.debug.dbcr0 & DBCR0_IDM)
-		|| (new_thread->debug.dbcr0 & DBCR0_IDM))
-			prime_debug_regs(new_thread);
+		|| (new_debug->dbcr0 & DBCR0_IDM))
+			prime_debug_regs(new_debug);
 }
 EXPORT_SYMBOL_GPL(switch_booke_debug_regs);
 #else	/* !CONFIG_PPC_ADV_DEBUG_REGS */
@@ -683,7 +683,7 @@ struct task_struct *__switch_to(struct task_struct *prev,
 #endif /* CONFIG_SMP */
 
 #ifdef CONFIG_PPC_ADV_DEBUG_REGS
-	switch_booke_debug_regs(&new->thread);
+	switch_booke_debug_regs(&new->thread.debug);
 #else
 /*
  * For PPC_BOOK3S_64, we use the hw-breakpoint interfaces that would

arch/powerpc/kernel/ptrace.c

@@ -1555,7 +1555,7 @@ long arch_ptrace(struct task_struct *child, long request,
 
 			flush_fp_to_thread(child);
 			if (fpidx < (PT_FPSCR - PT_FPR0))
-				memcpy(&tmp, &child->thread.fp_state.fpr,
+				memcpy(&tmp, &child->thread.TS_FPR(fpidx),
 				       sizeof(long));
 			else
 				tmp = child->thread.fp_state.fpscr;
@@ -1588,7 +1588,7 @@ long arch_ptrace(struct task_struct *child, long request,
 
 			flush_fp_to_thread(child);
 			if (fpidx < (PT_FPSCR - PT_FPR0))
-				memcpy(&child->thread.fp_state.fpr, &data,
+				memcpy(&child->thread.TS_FPR(fpidx), &data,
 				       sizeof(long));
 			else
 				child->thread.fp_state.fpscr = data;