[XTENSA] Remove non-rt signal handling

The non-rt signal handling was never really used, so we don't break
anything. This patch also cleans up the signal stack-frame to make
it independent from the processor configuration. It also improves
the method used for controlling single-stepping. We now save and
restore the 'icountlevel' register that controls single stepping
and set or clear the saved state to enable or disable it.

Signed-off-by: Chris Zankel <chris@zankel.net>

arch/xtensa/kernel/asm-offsets.c

@@ -39,6 +39,7 @@ int main(void)
 	DEFINE(PT_LEND, offsetof (struct pt_regs, lend));
 	DEFINE(PT_LCOUNT, offsetof (struct pt_regs, lcount));
 	DEFINE(PT_SAR, offsetof (struct pt_regs, sar));
+	DEFINE(PT_ICOUNTLEVEL, offsetof (struct pt_regs, icountlevel));
 	DEFINE(PT_SYSCALL, offsetof (struct pt_regs, syscall));
 	DEFINE(PT_AREG, offsetof (struct pt_regs, areg[0]));
 	DEFINE(PT_AREG0, offsetof (struct pt_regs, areg[0]));

arch/xtensa/kernel/entry.S

@@ -125,8 +125,9 @@ _user_exception:
 
 	movi	a2, 0
 	rsr	a3, SAR
-	wsr	a2, ICOUNTLEVEL
+	xsr	a2, ICOUNTLEVEL
 	s32i	a3, a1, PT_SAR
+	s32i	a2, a1, PT_ICOUNTLEVEL
 
 	/* Rotate ws so that the current windowbase is at bit0. */
 	/* Assume ws = xxwww1yyyy. Rotate ws right, so that a2 = yyyyxxwww1 */
@@ -276,8 +277,9 @@ _kernel_exception:
 
 	movi	a2, 0
 	rsr	a3, SAR
-	wsr	a2, ICOUNTLEVEL
+	xsr	a2, ICOUNTLEVEL
 	s32i	a3, a1, PT_SAR
+	s32i	a2, a1, PT_ICOUNTLEVEL
 
 	/* Rotate ws so that the current windowbase is at bit0. */
 	/* Assume ws = xxwww1yyyy. Rotate ws right, so that a2 = yyyyxxwww1 */
@@ -330,14 +332,16 @@ _kernel_exception:
 
 common_exception:
 
-	/* Save EXCVADDR, DEBUGCAUSE, and PC, and clear LCOUNT */
+	/* Save some registers, disable loops and clear the syscall flag. */
 
 	rsr	a2, DEBUGCAUSE
 	rsr	a3, EPC_1
 	s32i	a2, a1, PT_DEBUGCAUSE
 	s32i	a3, a1, PT_PC
 
+	movi	a2, -1
 	rsr	a3, EXCVADDR
+	s32i	a2, a1, PT_SYSCALL
 	movi	a2, 0
 	s32i	a3, a1, PT_EXCVADDR
 	xsr	a2, LCOUNT
@@ -450,27 +454,8 @@ common_exception_return:
 
 	/* Restore the state of the task and return from the exception. */
 
-
-	/* If we are returning from a user exception, and the process
-	 * to run next has PT_SINGLESTEP set, we want to setup
-	 * ICOUNT and ICOUNTLEVEL to step one instruction.
-	 * PT_SINGLESTEP is set by sys_ptrace (ptrace.c)
-	 */
-
 4:	/* a2 holds GET_CURRENT(a2,a1)  */
 
-	l32i	a3, a2, TI_TASK
-	l32i	a3, a3, TASK_PTRACE
-	bbci.l	a3, PT_SINGLESTEP_BIT, 1f # jump if single-step flag is not set
-
-	movi	a3, -2			# PT_SINGLESTEP flag is set,
-	movi	a4, 1			# icountlevel of 1 means it won't
-	wsr	a3, ICOUNT		# start counting until after rfe
-	wsr	a4, ICOUNTLEVEL		# so setup icount & icountlevel.
-	isync
-
-1:
-
 #if XCHAL_EXTRA_SA_SIZE
 
 	/* For user exceptions, restore the extra state from the user's TCB. */
@@ -665,6 +650,13 @@ common_exception_exit:
 	wsr	a3, LEND
 	wsr	a2, LCOUNT
 
+	/* We control single stepping through the ICOUNTLEVEL register. */
+
+	l32i	a2, a1, PT_ICOUNTLEVEL
+	movi	a3, -2
+	wsr	a2, ICOUNTLEVEL
+	wsr	a3, ICOUNT
+
 	/* Check if it was double exception. */
 
 	l32i	a0, a1, PT_DEPC

include/asm-xtensa/coprocessor.h

@@ -64,6 +64,7 @@ typedef struct {
 #  define COPROCESSOR_INFO_SIZE 8
 # endif
 #endif
+#endif	/* XCHAL_HAVE_CP */
 
 
 #ifndef __ASSEMBLY__
@@ -74,8 +75,11 @@ extern void save_coprocessor_registers(void*, int);
 # else
 #  define release_coprocessors(task)
 # endif
-#endif
 
-#endif
+typedef unsigned char cp_state_t[XTENSA_CP_EXTRA_SIZE]
+	__attribute__ ((aligned (XTENSA_CP_EXTRA_ALIGN)));
+
+#endif	/* !__ASSEMBLY__ */
+
 
 #endif	/* _XTENSA_COPROCESSOR_H */

include/asm-xtensa/elf.h

@@ -13,7 +13,6 @@
 #ifndef _XTENSA_ELF_H
 #define _XTENSA_ELF_H
 
-#include <asm/variant/core.h>
 #include <asm/ptrace.h>
 
 /* Xtensa processor ELF architecture-magic number */
@@ -49,7 +48,7 @@ typedef struct {
 	elf_greg_t lcount;
 	elf_greg_t sar;
 	elf_greg_t syscall;
-	elf_greg_t ar[XCHAL_NUM_AREGS];
+	elf_greg_t ar[64];
 } xtensa_gregset_t;
 
 #define ELF_NGREG	(sizeof(xtensa_gregset_t) / sizeof(elf_greg_t))

include/asm-xtensa/ptrace.h

@@ -99,7 +99,8 @@ struct pt_regs {
 	unsigned long windowbase;	/*  48 */
 	unsigned long windowstart;	/*  52 */
 	unsigned long syscall;		/*  56 */
-	int reserved[2];		/*  64 */
+	unsigned long icountlevel;	/*  60 */
+	int reserved[1];		/*  64 */
 
 	/* Make sure the areg field is 16 bytes aligned. */
 	int align[0] __attribute__ ((aligned(16)));

include/asm-xtensa/sigcontext.h

@@ -5,21 +5,12 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 2001 - 2003 Tensilica Inc.
+ * Copyright (C) 2001 - 2007 Tensilica Inc.
  */
 
 #ifndef _XTENSA_SIGCONTEXT_H
 #define _XTENSA_SIGCONTEXT_H
 
-#define _ASMLANGUAGE
-#include <asm/processor.h>
-#include <asm/coprocessor.h>
-
-
-struct _cpstate {
-	unsigned char _cpstate[XTENSA_CP_EXTRA_SIZE];
-} __attribute__ ((aligned (XTENSA_CP_EXTRA_ALIGN)));
-
 
 struct sigcontext {
 	unsigned long	oldmask;
@@ -27,18 +18,13 @@ struct sigcontext {
 	/* CPU registers */
 	unsigned long sc_pc;
 	unsigned long sc_ps;
-	unsigned long sc_wmask;
-	unsigned long sc_windowbase;
-	unsigned long sc_windowstart;
 	unsigned long sc_lbeg;
 	unsigned long sc_lend;
 	unsigned long sc_lcount;
 	unsigned long sc_sar;
-	unsigned long sc_depc;
-	unsigned long sc_dareg0;
-	unsigned long sc_treg[4];
-	unsigned long sc_areg[XCHAL_NUM_AREGS];
-	struct _cpstate *sc_cpstate;
+	unsigned long sc_acclo;
+	unsigned long sc_acchi;
+	unsigned long sc_a[16];
 };
 
-#endif /* __ASM_XTENSA_SIGCONTEXT_H */
+#endif /* _XTENSA_SIGCONTEXT_H */

include/asm-xtensa/unistd.h

@@ -485,8 +485,8 @@ __SYSCALL(217, sys_sched_get_priority_min, 1)
 __SYSCALL(218, sys_sched_rr_get_interval, 2)
 #define __NR_sched_yield 			219
 __SYSCALL(219, sys_sched_yield, 0)
-#define __NR_sigreturn	 			222
-__SYSCALL(222, xtensa_sigreturn, 0)
+#define __NR_available222 			222
+__SYSCALL(222, sys_ni_syscall, 0)
 
 /* Signal Handling */