Files
linux-rockchip/include/linux
Brad Mouring a2c054a896 net: phy: Tell caller result of phy_change()
In 664fcf123a (net: phy: Threaded interrupts allow some simplification)
the phy_interrupt system was changed to use a traditional threaded
interrupt scheme instead of a workqueue approach.

With this change, the phy status check moved into phy_change, which
did not report back to the caller whether or not the interrupt was
handled. This means that, in the case of a shared phy interrupt,
only the first phydev's interrupt registers are checked (since
phy_interrupt() would always return IRQ_HANDLED). This leads to
interrupt storms when it is a secondary device that's actually the
interrupt source.

Signed-off-by: Brad Mouring <brad.mouring@ni.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-12 10:33:07 -04:00
..
2018-02-20 11:34:54 +00:00
2018-02-06 18:32:44 -08:00
2018-02-12 15:59:08 +00:00
2018-02-26 12:32:42 -08:00
2018-02-26 09:48:42 -07:00
2018-02-06 16:41:29 -05:00
2018-02-24 01:43:47 +01:00
2018-01-31 17:18:38 -08:00
2018-01-31 17:18:40 -08:00
2018-01-31 17:18:37 -08:00
2018-02-01 11:40:07 -06:00
2018-02-06 16:41:28 -05:00
2018-02-06 18:32:47 -08:00
2018-02-06 18:32:44 -08:00