In tipc_sk_enqueue() we use hardcoded 2 jiffies to extract
socket buffer from generic queue to particular socket.
The 2 jiffies is too short in case there are other high priority
tasks get CPU cycles for multiple jiffies update. As result, no
buffer could be enqueued to particular socket.
To solve this, we switch to use constant timeout 20msecs.
Then, the function will be expired between 2 jiffies (CONFIG_100HZ)
and 20 jiffies (CONFIG_1000HZ).
Fixes: c637c10355 ("tipc: resolve race problem at unicast message reception")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a statement that is indented one character too deeply,
clean this up.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
__tipc_sendmsg() is called to send SYN packet by either tipc_sendmsg()
or tipc_connect(). The difference is in tipc_connect(), it will call
tipc_wait_for_connect() after __tipc_sendmsg() to wait until connecting
is done. So there's no need to wait in __tipc_sendmsg() for this case.
This patch is to fix it by calling tipc_wait_for_connect() only when dlen
is not 0 in __tipc_sendmsg(), which means it's called by tipc_connect().
Note this also fixes the failure in tipcutils/test/ptts/:
# ./tipcTS &
# ./tipcTC 9
(hang)
Fixes: 36239dab6da7 ("tipc: fix implicit-connect for SYN+")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
syzbot reported an use-after-free crash:
BUG: KASAN: use-after-free in tipc_recvmsg+0xf77/0xf90 net/tipc/socket.c:1979
Call Trace:
tipc_recvmsg+0xf77/0xf90 net/tipc/socket.c:1979
sock_recvmsg_nosec net/socket.c:943 [inline]
sock_recvmsg net/socket.c:961 [inline]
sock_recvmsg+0xca/0x110 net/socket.c:957
tipc_conn_rcv_from_sock+0x162/0x2f0 net/tipc/topsrv.c:398
tipc_conn_recv_work+0xeb/0x190 net/tipc/topsrv.c:421
process_one_work+0x98d/0x1630 kernel/workqueue.c:2276
worker_thread+0x658/0x11f0 kernel/workqueue.c:2422
As Hoang pointed out, it was caused by skb_cb->bytes_read still accessed
after calling tsk_advance_rx_queue() to free the skb in tipc_recvmsg().
This patch is to fix it by accessing skb_cb->bytes_read earlier than
calling tsk_advance_rx_queue().
Fixes: f4919ff59c ("tipc: keep the skb in rcv queue until the whole data is read")
Reported-by: syzbot+e6741b97d5552f97c24d@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The release_sock() is blocking function, it would change the state
after sleeping. In order to evaluate the stated condition outside
the socket lock context, switch to use wait_woken() instead.
Fixes: 6398e23cdb ("tipc: standardize accept routine")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
For implicit-connect, when it's either SYN- or SYN+, an ACK should
be sent back to the client immediately. It's not appropriate for
the client to enter established state only after receiving data
from the server.
On client side, after the SYN is sent out, tipc_wait_for_connect()
should be called to wait for the ACK if timeout is set.
This patch also restricts __tipc_sendstream() to call __sendmsg()
only when it's in TIPC_OPEN state, so that the client can program
in a single loop doing both connecting and data sending like:
for (...)
sendmsg(dest, buf);
This makes the implicit-connect more implicit.
Fixes: b97bf3fd8f ("[TIPC] Initial merge")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, when userspace reads a datagram with a buffer that is
smaller than this datagram, the data will be truncated and only
part of it can be received by users. It doesn't seem right that
users don't know the datagram size and have to use a huge buffer
to read it to avoid the truncation.
This patch to fix it by keeping the skb in rcv queue until the
whole data is read by users. Only the last msg of the datagram
will be marked with MSG_EOR, just as TCP/SCTP does.
Note that this will work as above only when MSG_EOR is set in the
flags parameter of recvmsg(), so that it won't break any old user
applications.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We introduce a new macro TIPC_ANY_SCOPE to make the handling of the
lookup scope value more comprehensible during multicast reception.
The (unchanged) rules go as follows:
1) Multicast messages sent from own node are delivered to all matching
sockets on the own node, irrespective of their binding scope.
2) Multicast messages sent from other nodes arrive here because they
have found TIPC_CLUSTER_SCOPE bindings emanating from this node.
Those messages should be delivered to exactly those sockets, but not
to local sockets bound with TIPC_NODE_SCOPE, since the latter
obviously were not meant to be visible for those senders.
3) Group multicast/broadcast messages are delivered to the sockets with
a binding scope matching exactly the lookup scope indicated in the
message header, and nobody else.
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Tested-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We refactor tipc_sk_anc_data_recv() to make it slightly more
comprehensible, but also to facilitate application of some additions
to the code in a future commit.
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Tested-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We eliminate the redundant fields conn_type and conn_instance in
struct tipc_sock. On the connecting side, this information is already
present in the unused (after the connection is established) part of
the pre-allocated header, and on the accepting side, we put it there
when the new socket is created.
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Tested-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts:
MAINTAINERS
- keep Chandrasekar
drivers/net/ethernet/mellanox/mlx5/core/en_main.c
- simple fix + trust the code re-added to param.c in -next is fine
include/linux/bpf.h
- trivial
include/linux/ethtool.h
- trivial, fix kdoc while at it
include/linux/skmsg.h
- move to relevant place in tcp.c, comment re-wrapped
net/core/skmsg.c
- add the sk = sk // sk = NULL around calls
net/tipc/crypto.c
- trivial
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We fix a warning from the htmldoc tool and an indentation error reported
by smatch. There are no functional changes in this commit.
Signed-off-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the if(skb_peek(arrvq) == skb) branch, it calls __skb_dequeue(arrvq) to get
the skb by skb = skb_peek(arrvq). Then __skb_dequeue() unlinks the skb from arrvq
and returns the skb which equals to skb_peek(arrvq). After __skb_dequeue(arrvq)
finished, the skb is freed by kfree_skb(__skb_dequeue(arrvq)) in the first time.
Unfortunately, the same skb is freed in the second time by kfree_skb(skb) after
the branch completed.
My patch removes kfree_skb() in the if(skb_peek(arrvq) == skb) branch, because
this skb will be freed by kfree_skb(skb) finally.
Fixes: cb1b728096 ("tipc: eliminate race condition at multicast reception")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
We simplify the signature if function tipc_nametbl_lookup_anycast(),
using address structures instead of discrete integers.
This also makes it possible to make some improvements to the functions
__tipc_sendmsg() in socket.c and tipc_msg_lookup_dest() in msg.c.
Signed-off-by: Jon Maloy <jmaloy@redhat.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Hoang Le <hoang.h.le@dektech.com.au>
Acked-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Acked-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The binding table provides four different lookup functions, which
purpose is not obvious neither by their names nor by the (lack of)
descriptions.
We now give these functions names that better match their purposes,
and improve the comments that describe what they are doing.
Signed-off-by: Jon Maloy <jmaloy@redhat.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Hoang Le <hoang.h.le@dektech.com.au>
Acked-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Acked-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
