Pull arm64 updates from Will Deacon:
"There's the usual summary below, but the highlights are support for
the Armv8.6 timer extensions, KASAN support for asymmetric MTE, the
ability to kexec() with the MMU enabled and a second attempt at
switching to the generic pfn_valid() implementation.
Summary:
- Support for the Arm8.6 timer extensions, including a
self-synchronising view of the system registers to elide some
expensive ISB instructions.
- Exception table cleanup and rework so that the fixup handlers
appear correctly in backtraces.
- A handful of miscellaneous changes, the main one being selection of
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK.
- More mm and pgtable cleanups.
- KASAN support for "asymmetric" MTE, where tag faults are reported
synchronously for loads (via an exception) and asynchronously for
stores (via a register).
- Support for leaving the MMU enabled during kexec relocation, which
significantly speeds up the operation.
- Minor improvements to our perf PMU drivers.
- Improvements to the compat vDSO build system, particularly when
building with LLVM=1.
- Preparatory work for handling some Coresight TRBE tracing errata.
- Cleanup and refactoring of the SVE code to pave the way for SME
support in future.
- Ensure SCS pages are unpoisoned immediately prior to freeing them
when KASAN is enabled for the vmalloc area.
- Try moving to the generic pfn_valid() implementation again now that
the DMA mapping issue from last time has been resolved.
- Numerous improvements and additions to our FPSIMD and SVE
selftests"
[ armv8.6 timer updates were in a shared branch and already came in
through -tip in the timer pull - Linus ]
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (85 commits)
arm64: Select POSIX_CPU_TIMERS_TASK_WORK
arm64: Document boot requirements for FEAT_SME_FA64
arm64/sve: Fix warnings when SVE is disabled
arm64/sve: Add stub for sve_max_virtualisable_vl()
arm64: errata: Add detection for TRBE write to out-of-range
arm64: errata: Add workaround for TSB flush failures
arm64: errata: Add detection for TRBE overwrite in FILL mode
arm64: Add Neoverse-N2, Cortex-A710 CPU part definition
selftests: arm64: Factor out utility functions for assembly FP tests
arm64: vmlinux.lds.S: remove `.fixup` section
arm64: extable: add load_unaligned_zeropad() handler
arm64: extable: add a dedicated uaccess handler
arm64: extable: add `type` and `data` fields
arm64: extable: use `ex` for `exception_table_entry`
arm64: extable: make fixup_exception() return bool
arm64: extable: consolidate definitions
arm64: gpr-num: support W registers
arm64: factor out GPR numbering helpers
arm64: kvm: use kvm_exception_table_entry
arm64: lib: __arch_copy_to_user(): fold fixups into body
...
Mapping something twice should be possible as long as,
DMA_ATTR_SKIP_CPU_SYNC is passed to the strictly speaking second relevant
mapping operation (that attempts to map the same thing). So, don't issue a
warning if the specified condition is met in add_dma_entry().
Signed-off-by: Hamza Mahfooz <someguy@effective-light.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
htmldocs began producing the following warnings:
kernel/dma/mapping.c:256: WARNING: Definition list ends without a
blank line; unexpected unindent.
kernel/dma/mapping.c:257: WARNING: Bullet list ends without a blank
line; unexpected unindent.
Reformatting the list without hyphens fixes the warnings and produces
both a readable text and HTML output.
Fixes: fffe3cc8c2 ("dma-mapping: allow map_sg() ops to return negative error code")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add the missing description for the nents parameter, and fix a trivial
misalignment.
Fixes: fffe3cc8c2 ("dma-mapping: allow map_sg() ops to return negative error codes")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Christoph Hellwig <hch@lst.de>
These can only return 0 for failure or the number of entries, so turn
the return value into an unsigned int.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Now that all the .map_sg operations have been converted to returning
proper error codes, drop the code to handle a zero return value,
add a warning if a zero is returned.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Allow dma_map_sgtable() to pass errors from the map_sg() ops. This
will be required for returning appropriate error codes when mapping
P2PDMA memory.
Introduce __dma_map_sg_attrs() which will return the raw error code
from the map_sg operation (whether it be negative or zero). Then add a
dma_map_sg_attrs() wrapper to convert any negative errors to zero to
satisfy the existing calling convention.
dma_map_sgtable() defines three error codes that .map_sg implementations
are allowed to return: -EINVAL, -ENOMEM and -EIO. The latter of which
is a generic return for cases that are passing DMA_MAPPING_ERROR
through.
dma_map_sgtable() will convert a zero error return for old map_sg() ops
into a -EIO return and return any negative errors as reported.
This allows map_sg implementations to start returning multiple
negative error codes. Legacy map_sg implementations can continue
to return zero until they are all converted.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add a new API that returns a potentiall virtually non-contigous sg_table
and a DMA address. This API is only properly implemented for dma-iommu
and will simply return a contigious chunk as a fallback.
The intent is that drivers can use this API if either:
- no kernel mapping or only temporary kernel mappings are required.
That is as a better replacement for DMA_ATTR_NO_KERNEL_MAPPING
- a kernel mapping is required for cached and DMA mapped pages, but
the driver also needs the pages to e.g. map them to userspace.
In that sense it is a replacement for some aspects of the recently
removed and never fully implemented DMA_ATTR_NON_CONSISTENT
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Tested-by: Ricardo Ribalda <ribalda@chromium.org>
Factour out internal versions without the dma_debug calls in preparation
for callers that will need different dma_debug calls.
Note that this changes the dma_debug calls to get the not page aligned
size values, but as long as alloc and free agree on one variant we are
fine.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Tested-by: Ricardo Ribalda <ribalda@chromium.org>
Add a helper to map memory allocated using dma_alloc_pages into
a user address space, similar to the dma_alloc_attrs function for
coherent allocations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Tested-by: Ricardo Ribalda <ribalda@chromium.org>
Pull dma-mapping updates from Christoph Hellwig:
- add support to emulate processing delays in the DMA API benchmark
selftest (Barry Song)
- remove support for non-contiguous noncoherent allocations, which
aren't used and will be replaced by a different API
* tag 'dma-mapping-5.12' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: remove the {alloc,free}_noncoherent methods
dma-mapping: benchmark: pretend DMA is transmitting
Lift the dma_default_coherent variable from the mips architecture code
to the driver core. This allows an architecture to sdefault all device
to be DMA coherent at run time, even if the kernel is build with support
for DMA noncoherent device. By allowing device_initialize to set the
->dma_coherent field to this default the amount of arch hooks required
for this behavior can be greatly reduced.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
It turns out allowing non-contigous allocations here was a rather bad
idea, as we'll now need to define ways to get the pages for mmaping
or dma_buf sharing. Revert this change and stick to the original
concept. A different API for the use case of non-contigous allocations
will be added back later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Tested-by: Ricardo Ribalda <ribalda@chromium.org>:wq
At the moment we allow bypassing DMA ops only when we can do this for
the entire RAM. However there are configs with mixed type memory
where we could still allow bypassing IOMMU in most cases;
POWERPC with persistent memory is one example.
This adds an arch hook to determine where bypass can still work and
we invoke direct DMA API. The following patch checks the bus limit
on POWERPC to allow or disallow direct mapping.
This adds a ARCH_HAS_DMA_MAP_DIRECT config option to make the arch_xxxx
hooks no-op by default.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Most of the dma_direct symbols should only be used by direct.c and
mapping.c, so move them to kernel/dma. In fact more of dma-direct.h
should eventually move, but that will require more coordination with
other subsystems.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Most of dma-debug.h is not required by anything outside of kernel/dma.
Move the four declarations needed by dma-mappin.h or dma-ops providers
into dma-mapping.h and dma-map-ops.h, and move the remainder of the
file to kernel/dma/debug.h.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Split out all the bits that are purely for dma_map_ops implementations
and related code into a new <linux/dma-map-ops.h> header so that they
don't get pulled into all the drivers. That also means the architecture
specific <asm/dma-mapping.h> is not pulled in by <linux/dma-mapping.h>
any more, which leads to a missing includes that were pulled in by the
x86 or arm versions in a few not overly portable drivers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
This API is the equivalent of alloc_pages, except that the returned memory
is guaranteed to be DMA addressable by the passed in device. The
implementation will also be used to provide a more sensible replacement
for DMA_ATTR_NON_CONSISTENT flag.
Additionally dma_alloc_noncoherent is switched over to use dma_alloc_pages
as its backend.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> (MIPS part)
All users are gone now, remove the API.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> (MIPS part)
When booting the kernel v5.9-rc4 on a VM, the kernel would panic when
printing a warning message in swiotlb_map(). The dev->dma_mask must not
be a NULL pointer when calling the dma mapping layer. A NULL pointer
check can potentially avoid the panic.
Signed-off-by: Thomas Tai <thomas.tai@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add a new file that contains helpers for misc DMA ops, which is only
built when CONFIG_DMA_OPS is set.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Several IOMMU drivers have a bypass mode where they can use a direct
mapping if the devices DMA mask is large enough. Add generic support
to the core dma-mapping code to do that to switch those drivers to
a common solution.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
For a long time the DMA API has been implemented inline in dma-mapping.h,
but the function bodies can be quite large. Move them all out of line.
This also removes all the dma_direct_* exports as those are just
implementation details and should never be used by drivers directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
