The "item" pointer is always going to be valid pointer and does not need to
be checked.
But if "item" were NULL then item_to_lun() would not return a NULL, but
instead, the container_of() pointer math would return a value in the error
pointer range. This confuses static checkers since it looks like a NULL vs
IS_ERR() bug.
Delete the bogus checks.
Link: https://lore.kernel.org/r/20211118084900.GA24550@kili
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull more SCSI updates from James Bottomley:
"This series is all the stragglers that didn't quite make the first
merge window pull. It's mostly minor updates and bug fixes of merge
window code but it also has two driver updates: ufs and qla2xxx"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (46 commits)
scsi: scsi_debug: Don't call kcalloc() if size arg is zero
scsi: core: Remove command size deduction from scsi_setup_scsi_cmnd()
scsi: scsi_ioctl: Validate command size
scsi: ufs: ufshpb: Properly handle max-single-cmd
scsi: core: Avoid leaving shost->last_reset with stale value if EH does not run
scsi: bsg: Fix errno when scsi_bsg_register_queue() fails
scsi: sr: Remove duplicate assignment
scsi: ufs: ufs-exynos: Introduce ExynosAuto v9 virtual host
scsi: ufs: ufs-exynos: Multi-host configuration for ExynosAuto v9
scsi: ufs: ufs-exynos: Support ExynosAuto v9 UFS
scsi: ufs: ufs-exynos: Add pre/post_hce_enable drv callbacks
scsi: ufs: ufs-exynos: Factor out priv data init
scsi: ufs: ufs-exynos: Add EXYNOS_UFS_OPT_SKIP_CONFIG_PHY_ATTR option
scsi: ufs: ufs-exynos: Support custom version of ufs_hba_variant_ops
scsi: ufs: ufs-exynos: Add setup_clocks callback
scsi: ufs: ufs-exynos: Add refclkout_stop control
scsi: ufs: ufs-exynos: Simplify drv_data retrieval
scsi: ufs: ufs-exynos: Change pclk available max value
scsi: ufs: Add quirk to enable host controller without PH configuration
scsi: ufs: Add quirk to handle broken UIC command
...
Pull SCSI updates from James Bottomley:
"This consists of the usual driver updates (ufs, smartpqi, lpfc,
target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug
fixes.
Notable core changes are the removal of scsi->tag which caused some
churn in obsolete drivers and a sweep through all drivers to call
scsi_done() directly instead of scsi->done() which removes a pointer
indirection from the hot path and a move to register core sysfs files
earlier, which means they're available to KOBJ_ADD processing, which
necessitates switching all drivers to using attribute groups"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits)
scsi: lpfc: Update lpfc version to 14.0.0.3
scsi: lpfc: Allow fabric node recovery if recovery is in progress before devloss
scsi: lpfc: Fix link down processing to address NULL pointer dereference
scsi: lpfc: Allow PLOGI retry if previous PLOGI was aborted
scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine
scsi: lpfc: Correct sysfs reporting of loop support after SFP status change
scsi: lpfc: Wait for successful restart of SLI3 adapter during host sg_reset
scsi: lpfc: Revert LOG_TRACE_EVENT back to LOG_INIT prior to driver_resource_setup()
scsi: ufs: ufshcd-pltfrm: Fix memory leak due to probe defer
scsi: ufs: mediatek: Avoid sched_clock() misuse
scsi: mpt3sas: Make mpt3sas_dev_attrs static
scsi: scsi_transport_sas: Add 22.5 Gbps link rate definitions
scsi: target: core: Stop using bdevname()
scsi: aha1542: Use memcpy_{from,to}_bvec()
scsi: sr: Add error handling support for add_disk()
scsi: sd: Add error handling support for add_disk()
scsi: target: Perform ALUA group changes in one step
scsi: target: Replace lun_tg_pt_gp_lock with rcu in I/O path
scsi: target: Fix alua_tg_pt_gps_count tracking
scsi: target: Fix ordered tag handling
...
Pull kiocb->ki_complete() cleanup from Jens Axboe:
"This removes the res2 argument from kiocb->ki_complete().
Only the USB gadget code used it, everybody else passes 0. The USB
guys checked the user gadget code they could find, and everybody just
uses res as expected for the async interface"
* tag 'for-5.16/ki_complete-2021-10-29' of git://git.kernel.dk/linux-block:
fs: get rid of the res2 iocb->ki_complete argument
usb: remove res2 argument from gadget code completions
Pull QUEUE_FLAG_SCSI_PASSTHROUGH removal from Jens Axboe:
"This contains a series leading to the removal of the
QUEUE_FLAG_SCSI_PASSTHROUGH queue flag"
* tag 'for-5.16/passthrough-flag-2021-10-29' of git://git.kernel.dk/linux-block:
block: remove blk_{get,put}_request
block: remove QUEUE_FLAG_SCSI_PASSTHROUGH
block: remove the initialize_rq_fn blk_mq_ops method
scsi: add a scsi_alloc_request helper
bsg-lib: initialize the bsg_job in bsg_transport_sg_io_fn
nfsd/blocklayout: use ->get_unique_id instead of sending SCSI commands
sd: implement ->get_unique_id
block: add a ->get_unique_id method
Currently TMF commands are removed from de_device.dev_tmf_list at the very
end of se_cmd lifecycle. However, se_lun unlinks from se_cmd upon a command
status (response) being queued in transport layer. This means that LUN and
backend device can be deleted in the meantime and a panic will occur:
target_tmr_work()
cmd->se_tfo->queue_tm_rsp(cmd); // send abort_rsp to a wire
transport_lun_remove_cmd(cmd) // unlink se_cmd from se_lun
- // - // - // -
<<<--- lun remove
<<<--- core backend device remove
- // - // - // -
qlt_handle_abts_completion()
tfo->free_mcmd()
transport_generic_free_cmd()
target_put_sess_cmd()
core_tmr_release_req() {
if (dev) { // backend device, can not be null
spin_lock_irqsave(&dev->se_tmr_lock, flags); //<<<--- CRASH
Call Trace:
NIP [c000000000e1683c] _raw_spin_lock_irqsave+0x2c/0xc0
LR [c00800000e433338] core_tmr_release_req+0x40/0xa0 [target_core_mod]
Call Trace:
(unreliable)
0x0
target_put_sess_cmd+0x2a0/0x370 [target_core_mod]
transport_generic_free_cmd+0x6c/0x1b0 [target_core_mod]
tcm_qla2xxx_complete_mcmd+0x28/0x50 [tcm_qla2xxx]
process_one_work+0x2c4/0x5c0
worker_thread+0x88/0x690
For the iSCSI protocol this is easily reproduced:
- Send some SCSI sommand
- Send Abort of that command over iSCSI
- Remove LUN on target
- Send next iSCSI command to acknowledge the Abort_Response
- Target panics
There is no need to keep the command in tmr_list until response completion,
so move the removal from tmr_list from the response completion to the
response queueing when the LUN is unlinked. Move the removal from state
list too as it is a subject to the same race condition.
Link: https://lore.kernel.org/r/20211018135753.15297-1-d.bogdanov@yadro.com
Fixes: c66ac9db8d ("[SCSI] target: Add LIO target core v4.0.0-rc6")
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The second argument was only used by the USB gadget code, yet everyone
pays the overhead of passing a zero to be passed into aio, where it
ends up being part of the aio res2 value.
Now that everybody is passing in zero, kill off the extra argument.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a new helper that calls blk_get_request and initializes the
scsi_request to avoid the indirect call through ->.initialize_rq_fn.
Note that this makes the pktcdvd driver depend on the SCSI core, but
given that only SCSI devices support SCSI passthrough requests that
is not a functional change.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20211021060607.264371-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We are only holding the lun_tg_pt_gp_lock in target_alua_state_check() to
make sure tg_pt_gp is not freed from under us while we copy the state,
delay, ID values. We can instead use RCU here to access the tg_pt_gp.
With this patch IOPs can increase up to 10% for jobs like:
fio --filename=/dev/sdX --direct=1 --rw=randrw --bs=4k \
--ioengine=libaio --iodepth=64 --numjobs=N
when there are multiple sessions (running that fio command to each /dev/sdX
or using multipath and there are over 8 paths), or more than 8 queues for
the loop or vhost with multiple threads case and numjobs > 8.
Link: https://lore.kernel.org/r/20210930020422.92578-5-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We can't free the tg_pt_gp in core_alua_set_tg_pt_gp_id() because it's
still accessed via configfs. Its release must go through the normal
configfs/refcount process.
The max alua_tg_pt_gps_count check should probably have been done in
core_alua_allocate_tg_pt_gp(), but with the current code userspace could
have created 0x0000ffff + 1 groups, but only set the id for 0x0000ffff.
Then it could have deleted a group with an ID set, and then set the ID for
that extra group and it would work ok.
It's unlikely, but just in case this patch continues to allow that type of
behavior, and just fixes the kfree() while in use bug.
Link: https://lore.kernel.org/r/20210930020422.92578-4-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch fixes the following bugs:
1. If there are multiple ordered cmds queued and multiple simple cmds
completing, target_restart_delayed_cmds() could be called on different
CPUs and each instance could start a ordered cmd. They could then run in
different orders than they were queued.
2. target_restart_delayed_cmds() and target_handle_task_attr() can race
where:
1. target_handle_task_attr() has passed the simple_cmds == 0 check.
2. transport_complete_task_attr() then decrements simple_cmds to 0.
3. transport_complete_task_attr() runs target_restart_delayed_cmds() and
it does not see any cmds on the delayed_cmd_list.
4. target_handle_task_attr() adds the cmd to the delayed_cmd_list.
The cmd will then end up timing out.
3. If we are sent > 1 ordered cmds and simple_cmds == 0, we can execute
them out of order, because target_handle_task_attr() will hit that
simple_cmds check first and return false for all ordered cmds sent.
4. We run target_restart_delayed_cmds() after every cmd completion, so if
there is more than 1 simple cmd running, we start executing ordered cmds
after that first cmd instead of waiting for all of them to complete.
5. Ordered cmds are not supposed to start until HEAD OF QUEUE and all older
cmds have completed, and not just simple.
6. It's not a bug but it doesn't make sense to take the delayed_cmd_lock
for every cmd completion when ordered cmds are almost never used. Just
replacing that lock with an atomic increases IOPs by up to 10% when
completions are spread over multiple CPUs and there are multiple
sessions/ mqs/thread accessing the same device.
This patch moves the queued delayed handling to a per device work to
serialze the cmd executions for each device and adds a new counter to track
HEAD_OF_QUEUE and SIMPLE cmds. We can then check the new counter to
determine when to run the work on the completion path.
Link: https://lore.kernel.org/r/20210930020422.92578-3-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Tcmu populates the data area (used for communication with userspace) with
pages that are allocated by calling alloc_page(GFP_NOIO). Therefore
previous content of the allocated pages is exposed to user space. Avoid
this by adding __GFP_ZERO flag.
Zeroing the pages does (nearly) not affect tcmu throughput, because
allocated pages are re-used for the data transfers of later SCSI cmds.
Link: https://lore.kernel.org/r/20211013171606.25197-1-bostroesser@gmail.com
Signed-off-by: Bodo Stroesser <bostroesser@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Merge the 5.15/scsi-fixes branch into the staging tree to resolve UFS
conflict reported by sfr.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
