Commit Graph

99 Commits

Author SHA1 Message Date
Nobuhiro Iwamatsu
305a936af4 firmware: xilinx: Remove zynqmp_pm_get_eemi_ops() in IS_REACHABLE(CONFIG_ZYNQMP_FIRMWARE)
[ Upstream commit 79bfe480a0 ]

zynqmp_pm_get_eemi_ops() was removed in commit 4db8180ffe: "Firmware: xilinx:
Remove eemi ops for fpga related APIs", but not in IS_REACHABLE(CONFIG_ZYNQMP_FIRMWARE).
Any driver who want to communicate with PMC using EEMI APIs use the functions provided
for each function
This removed zynqmp_pm_get_eemi_ops() in IS_REACHABLE(CONFIG_ZYNQMP_FIRMWARE), and also
modify the documentation for this driver.

Fixes: 4db8180ffe ("firmware: xilinx: Remove eemi ops for fpga related APIs")
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Link: https://lore.kernel.org/r/20210215155849.2425846-1-iwamatsu@nigauri.org
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14 09:50:05 +02:00
Michal Simek
cfc0577ab1 firmware: xilinx: Add a blank line after function declaration
[ Upstream commit a80cefec2c ]

Fix all these issues which are also reported by checkpatch --strict.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/7b6007e05f6c01214861a37f198cd5bee62a4d3e.1606894725.git.michal.simek@xilinx.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14 09:50:05 +02:00
Richard Gong
bf4c643192 firmware: stratix10-svc: reset COMMAND_RECONFIG_FLAG_PARTIAL to 0
[ Upstream commit 2e8496f31d ]

Clean up COMMAND_RECONFIG_FLAG_PARTIAL flag by resetting it to 0, which
aligns with the firmware settings.

Fixes: 36847f9e3e ("firmware: stratix10-svc: correct reconfig flag and timeout values")
Signed-off-by: Richard Gong <richard.gong@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-07 15:00:11 +02:00
Amit Sunil Dhamne
acfdd18591 firmware: xilinx: Use hash-table for api feature check
Currently array of fix length PM_API_MAX is used to cache
the pm_api version (valid or invalid). However ATF based
PM APIs values are much higher then PM_API_MAX.
So to include ATF based PM APIs also, use hash-table to
store the pm_api version status.

Signed-off-by: Amit Sunil Dhamne <amit.sunil.dhamne@xilinx.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ravi Patel <ravi.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Michal Simek <michal.simek@xilinx.com>
Fixes: f3217d6f2f ("firmware: xilinx: fix out-of-bounds access")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1606197161-25976-1-git-send-email-rajan.vaja@xilinx.com
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-24 15:13:54 +01:00
Linus Torvalds
1785d11612 Merge tag 'char-misc-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
 "Here is the large set of char and misc and other driver subsystem
  patches for 5.9-rc1. Lots of new driver submissions in here, and
  cleanups and features for existing drivers.

  Highlights are:
   - habanalabs driver updates
   - coresight driver updates
   - nvmem driver updates
   - huge number of "W=1" build warning cleanups from Lee Jones
   - dyndbg updates
   - virtbox driver fixes and updates
   - soundwire driver updates
   - mei driver updates
   - phy driver updates
   - fpga driver updates
   - lots of smaller individual misc/char driver cleanups and fixes

  Full details are in the shortlog.

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (322 commits)
  habanalabs: remove unused but set variable 'ctx_asid'
  nvmem: qcom-spmi-sdam: Enable multiple devices
  dt-bindings: nvmem: SID: add binding for A100's SID controller
  nvmem: update Kconfig description
  nvmem: qfprom: Add fuse blowing support
  dt-bindings: nvmem: Add properties needed for blowing fuses
  dt-bindings: nvmem: qfprom: Convert to yaml
  nvmem: qfprom: use NVMEM_DEVID_AUTO for multiple instances
  nvmem: core: add support to auto devid
  nvmem: core: Add nvmem_cell_read_u8()
  nvmem: core: Grammar fixes for help text
  nvmem: sc27xx: add sc2730 efuse support
  nvmem: Enforce nvmem stride in the sysfs interface
  MAINTAINERS: Add git tree for NVMEM FRAMEWORK
  nvmem: sprd: Fix return value of sprd_efuse_probe()
  drivers: android: Fix the SPDX comment style
  drivers: android: Fix a variable declaration coding style issue
  drivers: android: Remove braces for a single statement if-else block
  drivers: android: Remove the use of else after return
  drivers: android: Fix a variable declaration coding style issue
  ...
2020-08-05 11:43:47 -07:00
Anson Huang
a24015fa8b firmware: imx: Move i.MX SCU soc driver into imx firmware folder
The i.MX SCU soc driver depends on SCU firmware driver, so it has to
use platform driver model for proper defer probe operation, since
it has no device binding in DT file, a simple platform device is
created together inside the platform driver. To make it more clean,
we can just move the entire SCU soc driver into imx firmware folder
and initialized by i.MX SCU firmware driver.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-13 10:02:00 +08:00
Richard Gong
bf0e5bf68a firmware: stratix10-svc: extend svc to support new RSU features
Extend Intel Stratix10 service layer driver to support new RSU DCMF
versions and max retry parameter.

DCMF = Decision Configuration Management Firmware. The max retry parameter
is the maximum times the images is allowed to reload itself before giving
up and starting RSU failover flow.

Signed-off-by: Richard Gong <richard.gong@intel.com>
Link: https://lore.kernel.org/r/1592231348-31334-3-git-send-email-richard.gong@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-02 14:48:48 +02:00
Richard Gong
36847f9e3e firmware: stratix10-svc: correct reconfig flag and timeout values
Correct the incorrect flag value for COMMAND_RECONFIG_FLAG_PARTIAL and
increase FPGA reconfig timeout values so that Intel service layer and
FPGA manager drivers can work with all versions of firmware.

Signed-off-by: Richard Gong <richard.gong@intel.com>
Link: https://lore.kernel.org/r/1592231348-31334-2-git-send-email-richard.gong@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-02 14:48:47 +02:00
Peng Fan
169caf6925 firmware: imx: add resource management api
Add resource management API, when we have multiple
partition running together, resources not owned to current
partition should not be used.

Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-06-23 15:37:56 +08:00
Linus Torvalds
9aa900c809 Merge tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
 "Here is the large set of char/misc driver patches for 5.8-rc1

  Included in here are:

   - habanalabs driver updates, loads

   - mhi bus driver updates

   - extcon driver updates

   - clk driver updates (approved by the clock maintainer)

   - firmware driver updates

   - fpga driver updates

   - gnss driver updates

   - coresight driver updates

   - interconnect driver updates

   - parport driver updates (it's still alive!)

   - nvmem driver updates

   - soundwire driver updates

   - visorbus driver updates

   - w1 driver updates

   - various misc driver updates

  In short, loads of different driver subsystem updates along with the
  drivers as well.

  All have been in linux-next for a while with no reported issues"

* tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (233 commits)
  habanalabs: correctly cast u64 to void*
  habanalabs: initialize variable to default value
  extcon: arizona: Fix runtime PM imbalance on error
  extcon: max14577: Add proper dt-compatible strings
  extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()'
  extcon: remove redundant assignment to variable idx
  w1: omap-hdq: print dev_err if irq flags are not cleared
  w1: omap-hdq: fix interrupt handling which did show spurious timeouts
  w1: omap-hdq: fix return value to be -1 if there is a timeout
  w1: omap-hdq: cleanup to add missing newline for some dev_dbg
  /dev/mem: Revoke mappings when a driver claims the region
  misc: xilinx-sdfec: convert get_user_pages() --> pin_user_pages()
  misc: xilinx-sdfec: cleanup return value in xsdfec_table_write()
  misc: xilinx-sdfec: improve get_user_pages_fast() error handling
  nvmem: qfprom: remove incorrect write support
  habanalabs: handle MMU cache invalidation timeout
  habanalabs: don't allow hard reset with open processes
  habanalabs: GAUDI does not support soft-reset
  habanalabs: add print for soft reset due to event
  habanalabs: improve MMU cache invalidation code
  ...
2020-06-07 10:59:32 -07:00
Arnd Bergmann
7b972f3830 Merge tag 'imx-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers
i.MX drivers update for 5.8:

- Optimize imx-scu driver to use one TX and one RX instead of four for
  talking to SCU.
- Fix one possible message header corruption where the response is
  longer than the request.
- Move System Control defines into dt-bindings header, so that DT can
  use them as well.
- A couple of small fixups.

* tag 'imx-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  firmware: imx: scu: Fix possible memory leak in imx_scu_probe()
  dt-bindings: firmware: imx: Add more system controls and PM clock types
  dt-bindings: firmware: imx: Move system control into dt-binding headfile
  firmware: imx: scu: Fix corruption of header
  firmware: imx-scu: Support one TX and one RX
  soc: imx8m: No need to put node when of_find_compatible_node() failed

Link: https://lore.kernel.org/r/20200523032516.11016-1-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-26 00:00:47 +02:00
Dong Aisheng
755a739794 dt-bindings: firmware: imx: Move system control into dt-binding headfile
i.MX8 SoCs DTS file needs system control macro definitions, so move them
into dt-binding headfile, then include/linux/firmware/imx/types.h can be
removed and those drivers using it should be changed accordingly.

Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-05-13 16:19:23 +08:00
Dmitry Osipenko
b720aaa347 firmware: tf: Different way of L2 cache enabling after LP2 suspend
ASUS TF300T device may not work properly if firmware is asked to fully
re-initialize L2 cache after resume from LP2 suspend. The downstream
kernel of TF300T uses different opcode to enable cache after resuming
from LP2, this opcode also works fine on Nexus 7 and Ouya devices.
Supposedly, this may be needed by an older firmware versions.

Reported-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Tested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Tested-by: Jasper Korten <jja2000@gmail.com>
Tested-by: David Heidelberg <david@ixit.cz>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-05-06 18:27:26 +02:00
Rajan Vaja
a2cc220a9a firmware: xilinx: Add sysfs and API to set boot health status
Add sysfs interface to set boot health status from user space.
Add API used by this interface to communicate with firmware.

If PMUFW is compiled with CHECK_HEALTHY_BOOT, it will check the
healthy bit on FPD WDT expiration. If healthy bit is set by a user
application running in Linux, PMUFW will do APU only restart. If
healthy bit is not set during FPD WDT expiration, PMUFW will do
system restart.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-26-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28 15:46:54 +02:00
Rajan Vaja
b3ae24c448 firmware: xilinx: Add sysfs to set shutdown scope
The Linux shutdown functionality implemented via PSCI system_off does
not include an option to set a scope, i.e. which parts of the system to
shut down.

This patch creates sysfs that allows to set the shutdown scope for the
next shutdown request. When the next shutdown is performed, the platform
specific portion of PSCI-system_off can use the chosen shutdown scope.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Stefan Krsmanovic <stefan.krsmanovic@aggios.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-25-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28 15:46:54 +02:00
Rajan Vaja
fdd2ed88ca firmware: xilinx: Add system shutdown API interface
Add system shutdown API interface which asks firmware to
perform system shutdown/restart.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-24-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28 15:46:54 +02:00
Rajan Vaja
ae5c961da6 firmware: xilinx: Add sysfs interface
Add firmware-ggs sysfs interface which provides read/write
interface to global storage registers.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-23-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28 15:46:54 +02:00
Rajan Vaja
4f680b72ea firmware: xilinx: Add APIs to read/write GGS/PGGS registers
Add APIs to read/write PGGS and GGS registers.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-22-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28 15:46:54 +02:00
Rajan Vaja
4db8180ffe firmware: xilinx: Remove eemi ops for fpga related APIs
Use direct function call instead of using eemi ops for fpga related
APIs. Also remove eemi ops structure.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-21-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28 15:45:09 +02:00
Rajan Vaja
bc86f9c546 firmware: xilinx: Remove eemi ops for aes engine
Use direct function call for aes engine instead of using eemi ops.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-20-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28 15:45:09 +02:00
Rajan Vaja
cbbbda71fe firmware: xilinx: Remove eemi ops for set_requirement
Use direct function call instead of using eemi ops for
set_requirement.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-19-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28 15:45:09 +02:00
Rajan Vaja
07fb1a4619 firmware: xilinx: Remove eemi ops for release_node
Use direct function call instead of using eemi ops for release_node.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-18-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28 15:45:09 +02:00
Rajan Vaja
bf8b27ed23 firmware: xilinx: Remove eemi ops for request_node
Use direct function call instead of using eemi ops for request_node.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-17-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28 15:45:09 +02:00
Rajan Vaja
951d0a97e4 firmware: xilinx: Remove eemi ops for set_suspend_mode
Use direct function call instead of eemi ops for set_suspend_mode.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-16-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28 15:45:08 +02:00
Rajan Vaja
9474da950d firmware: xilinx: Remove eemi ops for init_finalize
Use direct function call instead of eemi ops for init_finalize.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-15-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28 15:45:08 +02:00