This is the 6.1.115 stable release
* tag 'v6.1.115': (2780 commits)
Linux 6.1.115
xfrm: validate new SA's prefixlen using SA family when sel.family is unset
arm64/uprobes: change the uprobe_opcode_t typedef to fix the sparse warning
ACPI: PRM: Clean up guid type in struct prm_handler_info
platform/x86: dell-wmi: Ignore suspend notifications
ASoC: qcom: Fix NULL Dereference in asoc_qcom_lpass_cpu_platform_probe()
net: phy: dp83822: Fix reset pin definitions
serial: protect uart_port_dtr_rts() in uart_shutdown() too
selinux: improve error checking in sel_write_load()
drm/amd/display: Disable PSR-SU on Parade 08-01 TCON too
hv_netvsc: Fix VF namespace also in synthetic NIC NETDEV_REGISTER event
xfrm: fix one more kernel-infoleak in algo dumping
LoongArch: Get correct cores_per_package for SMT systems
ALSA: hda/realtek: Add subwoofer quirk for Acer Predator G9-593
KVM: arm64: Don't eagerly teardown the vgic on init error
KVM: nSVM: Ignore nCR3[4:0] when loading PDPTEs from memory
openat2: explicitly return -E2BIG for (usize > PAGE_SIZE)
nilfs2: fix kernel bug due to missing clearing of buffer delay flag
ACPI: button: Add DMI quirk for Samsung Galaxy Book2 to fix initial lid detection issue
ACPI: PRM: Find EFI_MEMORY_RUNTIME block for PRM handler and context
...
Change-Id: Iee600c49a5c914b79141c62cda38e787e429a167
Conflicts:
arch/arm64/boot/dts/rockchip/rk356x.dtsi
drivers/gpio/gpio-rockchip.c
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
drivers/gpu/drm/rockchip/rockchip_drm_vop.c
drivers/gpu/drm/rockchip/rockchip_drm_vop.h
drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
drivers/gpu/drm/rockchip/rockchip_vop_reg.c
drivers/media/i2c/imx335.c
drivers/pci/controller/dwc/pcie-dw-rockchip.c
drivers/spi/spi-rockchip.c
drivers/spi/spidev.c
drivers/usb/dwc3/gadget.c
drivers/usb/host/xhci.h
This is the 6.1.99 stable release
* tag 'v6.1.99': (1975 commits)
Linux 6.1.99
Revert "usb: xhci: prevent potential failure in handle_tx_event() for Transfer events without TRB"
Linux 6.1.98
nilfs2: fix incorrect inode allocation from reserved inodes
null_blk: Do not allow runt zone with zone capacity smaller then zone size
spi: cadence: Ensure data lines set to low during dummy-cycle period
nfc/nci: Add the inconsistency check between the input data length and count
kbuild: fix short log for AS in link-vmlinux.sh
nvmet: fix a possible leak when destroy a ctrl during qp establishment
platform/x86: touchscreen_dmi: Add info for the EZpad 6s Pro
platform/x86: touchscreen_dmi: Add info for GlobalSpace SolT IVW 11.6" tablet
regmap-i2c: Subtract reg size from max_write
nvme: adjust multiples of NVME_CTRL_PAGE_SIZE in offset
dma-mapping: benchmark: avoid needless copy_to_user if benchmark fails
nvme-multipath: find NUMA path only for online numa-node
ALSA: hda/realtek: Enable headset mic of JP-IK LEAP W502 with ALC897
fs/ntfs3: Mark volume as dirty if xattr is broken
i2c: pnx: Fix potential deadlock warning from del_timer_sync() call in isr
clk: mediatek: mt8183: Only enable runtime PM on mt8183-mfgcfg
clk: mediatek: clk-mtk: Register MFG notifier in mtk_clk_simple_probe()
...
Change-Id: Ibf9c2caa3bbffb7a960e82ec6c2b0b497753778c
Conflicts:
arch/arm64/boot/dts/rockchip/rk3328.dtsi
drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
drivers/pinctrl/pinctrl-rockchip.c
drivers/usb/gadget/function/u_audio.c
include/linux/usb/quirks.h
mm/cma.c
sound/soc/rockchip/rockchip_i2s_tdm.c
commit 7528c4fb1237512ee18049f852f014eba80bbe8d upstream.
I got a bad pud error and lost a 1GB HugeTLB when calling swapoff. The
problem can be reproduced by the following steps:
1. Allocate an anonymous 1GB HugeTLB and some other anonymous memory.
2. Swapout the above anonymous memory.
3. run swapoff and we will get a bad pud error in kernel message:
mm/pgtable-generic.c:42: bad pud 00000000743d215d(84000001400000e7)
We can tell that pud_clear_bad is called by pud_none_or_clear_bad in
unuse_pud_range() by ftrace. And therefore the HugeTLB pages will never
be freed because we lost it from page table. We can skip HugeTLB pages
for unuse_vma to fix it.
Link: https://lkml.kernel.org/r/20241015014521.570237-1-liushixin2@huawei.com
Fixes: 0fe6e20b9c ("hugetlb, rmap: add reverse mapping for hugepage")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Acked-by: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 532b53cebe58f34ce1c0f34d866f5c0e335c53c6 upstream.
Return -ENOSYS from memfd_secret() syscall if !can_set_direct_map(). This
is the case for example on some arm64 configurations, where marking 4k
PTEs in the direct map not present can only be done if the direct map is
set up at 4k granularity in the first place (as ARM's break-before-make
semantics do not easily allow breaking apart large/gigantic pages).
More precisely, on arm64 systems with !can_set_direct_map(),
set_direct_map_invalid_noflush() is a no-op, however it returns success
(0) instead of an error. This means that memfd_secret will seemingly
"work" (e.g. syscall succeeds, you can mmap the fd and fault in pages),
but it does not actually achieve its goal of removing its memory from the
direct map.
Note that with this patch, memfd_secret() will start erroring on systems
where can_set_direct_map() returns false (arm64 with
CONFIG_RODATA_FULL_DEFAULT_ENABLED=n, CONFIG_DEBUG_PAGEALLOC=n and
CONFIG_KFENCE=n), but that still seems better than the current silent
failure. Since CONFIG_RODATA_FULL_DEFAULT_ENABLED defaults to 'y', most
arm64 systems actually have a working memfd_secret() and aren't be
affected.
From going through the iterations of the original memfd_secret patch
series, it seems that disabling the syscall in these scenarios was the
intended behavior [1] (preferred over having
set_direct_map_invalid_noflush return an error as that would result in
SIGBUSes at page-fault time), however the check for it got dropped between
v16 [2] and v17 [3], when secretmem moved away from CMA allocations.
[1]: https://lore.kernel.org/lkml/20201124164930.GK8537@kernel.org/
[2]: https://lore.kernel.org/lkml/20210121122723.3446-11-rppt@kernel.org/#t
[3]: https://lore.kernel.org/lkml/20201125092208.12544-10-rppt@kernel.org/
Link: https://lkml.kernel.org/r/20241001080056.784735-1-roypat@amazon.co.uk
Fixes: 1507f51255 ("mm: introduce memfd_secret system call to create "secret" memory areas")
Signed-off-by: Patrick Roy <roypat@amazon.co.uk>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: James Gowans <jgowans@amazon.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7a2369b74abf76cd3e54c45b30f6addb497f831b ]
The z3fold compressed pages allocator is rarely used, most users use
zsmalloc. The only disadvantage of zsmalloc in comparison is the
dependency on MMU, and zbud is a more common option for !MMU as it was the
default zswap allocator for a long time.
Historically, zsmalloc had worse latency than zbud and z3fold but offered
better memory savings. This is no longer the case as shown by a simple
recent analysis [1]. That analysis showed that z3fold does not have any
advantage over zsmalloc or zbud considering both performance and memory
usage. In a kernel build test on tmpfs in a limited cgroup, z3fold took
3% more time and used 1.8% more memory. The latency of zswap_load() was
7% higher, and that of zswap_store() was 10% higher. Zsmalloc is better
in all metrics.
Moreover, z3fold apparently has latent bugs, which was made noticeable by
a recent soft lockup bug report with z3fold [2]. Switching to zsmalloc
not only fixed the problem, but also reduced the swap usage from 6~8G to
1~2G. Other users have also reported being bitten by mistakenly enabling
z3fold.
Other than hurting users, z3fold is repeatedly causing wasted engineering
effort. Apart from investigating the above bug, it came up in multiple
development discussions (e.g. [3]) as something we need to handle, when
there aren't any legit users (at least not intentionally).
The natural course of action is to deprecate z3fold, and remove in a few
cycles if no objections are raised from active users. Next on the list
should be zbud, as it offers marginal latency gains at the cost of huge
memory waste when compared to zsmalloc. That one will need to wait until
zsmalloc does not depend on MMU.
Rename the user-visible config option from CONFIG_Z3FOLD to
CONFIG_Z3FOLD_DEPRECATED so that users with CONFIG_Z3FOLD=y get a new
prompt with explanation during make oldconfig. Also, remove
CONFIG_Z3FOLD=y from defconfigs.
[1]https://lore.kernel.org/lkml/CAJD7tkbRF6od-2x_L8-A1QL3=2Ww13sCj4S3i4bNndqF+3+_Vg@mail.gmail.com/
[2]https://lore.kernel.org/lkml/EF0ABD3E-A239-4111-A8AB-5C442E759CF3@gmail.com/
[3]https://lore.kernel.org/lkml/CAJD7tkbnmeVugfunffSovJf9FAgy9rhBVt_tx=nxUveLUfqVsA@mail.gmail.com/
[arnd@arndb.de: deprecate ZSWAP_ZPOOL_DEFAULT_Z3FOLD as well]
Link: https://lkml.kernel.org/r/20240909202625.1054880-1-arnd@kernel.org
Link: https://lkml.kernel.org/r/20240904233343.933462-1-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Chris Down <chris@chrisdown.name>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vitaly Wool <vitaly.wool@konsulko.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
(cherry picked from commit 7a2369b74abf76cd3e54c45b30f6addb497f831b)
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1a83a716ec233990e1fd5b6fbb1200ade63bf450 upstream.
As long as krealloc() is called with __GFP_ZERO consistently, starting
with the initial memory allocation, __GFP_ZERO should be fully honored.
However, if for an existing allocation krealloc() is called with a
decreased size, it is not ensured that the spare portion the allocation is
zeroed. Thus, if krealloc() is subsequently called with a larger size
again, __GFP_ZERO can't be fully honored, since we don't know the previous
size, but only the bucket size.
Example:
buf = kzalloc(64, GFP_KERNEL);
memset(buf, 0xff, 64);
buf = krealloc(buf, 48, GFP_KERNEL | __GFP_ZERO);
/* After this call the last 16 bytes are still 0xff. */
buf = krealloc(buf, 64, GFP_KERNEL | __GFP_ZERO);
Fix this, by explicitly setting spare memory to zero, when shrinking an
allocation with __GFP_ZERO flag set or init_on_alloc enabled.
Link: https://lkml.kernel.org/r/20240812223707.32049-1-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 69b50d4351ed924f29e3d46b159e28f70dfc707f upstream.
The generic mmap_base code tries to leave a gap between the top of the
stack and the mmap base address, but enforces a minimum gap size (MIN_GAP)
of 128MB, which is too large on some setups. In particular, on arm tasks
without ADDR_LIMIT_32BIT, the STACK_TOP value is less than 128MB, so it's
impossible to fit such a gap in.
Only enforce this minimum if MIN_GAP < MAX_GAP, as we'd prefer to honour
MAX_GAP, which is defined proportionally, so scales better and always
leaves us with both _some_ stack space and some room for mmap.
This fixes the usercopy KUnit test suite on 32-bit arm, as it doesn't set
any personality flags so gets the default (in this case 26-bit) task size.
This test can be run with: ./tools/testing/kunit/kunit.py run --arch arm
usercopy --make_options LLVM=1
Link: https://lkml.kernel.org/r/20240803074642.1849623-2-davidgow@google.com
Fixes: dba79c3df4 ("arm: use generic mmap top-down layout and brk randomization")
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6758c1128ceb45d1a35298912b974eb4895b7dd9 upstream.
Instead of doing multiple tree walks, do one optimism range check with
lock hold, and exit if raced with another insertion. If a shadow exists,
check it with a new xas_get_order helper before releasing the lock to
avoid redundant tree walks for getting its order.
Drop the lock and do the allocation only if a split is needed.
In the best case, it only need to walk the tree once. If it needs to
alloc and split, 3 walks are issued (One for first ranged conflict check
and order retrieving, one for the second check after allocation, one for
the insert after split).
Testing with 4K pages, in an 8G cgroup, with 16G brd as block device:
echo 3 > /proc/sys/vm/drop_caches
fio -name=cached --numjobs=16 --filename=/mnt/test.img \
--buffered=1 --ioengine=mmap --rw=randread --time_based \
--ramp_time=30s --runtime=5m --group_reporting
Before:
bw ( MiB/s): min= 1027, max= 3520, per=100.00%, avg=2445.02, stdev=18.90, samples=8691
iops : min=263001, max=901288, avg=625924.36, stdev=4837.28, samples=8691
After (+7.3%):
bw ( MiB/s): min= 493, max= 3947, per=100.00%, avg=2625.56, stdev=25.74, samples=8651
iops : min=126454, max=1010681, avg=672142.61, stdev=6590.48, samples=8651
Test result with THP (do a THP randread then switch to 4K page in hope it
issues a lot of splitting):
echo 3 > /proc/sys/vm/drop_caches
fio -name=cached --numjobs=16 --filename=/mnt/test.img \
--buffered=1 --ioengine=mmap -thp=1 --readonly \
--rw=randread --time_based --ramp_time=30s --runtime=10m \
--group_reporting
fio -name=cached --numjobs=16 --filename=/mnt/test.img \
--buffered=1 --ioengine=mmap \
--rw=randread --time_based --runtime=5s --group_reporting
Before:
bw ( KiB/s): min= 4141, max=14202, per=100.00%, avg=7935.51, stdev=96.85, samples=18976
iops : min= 1029, max= 3548, avg=1979.52, stdev=24.23, samples=18976·
READ: bw=4545B/s (4545B/s), 4545B/s-4545B/s (4545B/s-4545B/s), io=64.0KiB (65.5kB), run=14419-14419msec
After (+12.5%):
bw ( KiB/s): min= 4611, max=15370, per=100.00%, avg=8928.74, stdev=105.17, samples=19146
iops : min= 1151, max= 3842, avg=2231.27, stdev=26.29, samples=19146
READ: bw=4635B/s (4635B/s), 4635B/s-4635B/s (4635B/s-4635B/s), io=64.0KiB (65.5kB), run=14137-14137msec
The performance is better for both 4K (+7.5%) and THP (+12.5%) cached read.
Link: https://lkml.kernel.org/r/20240415171857.19244-5-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Closes: https://lore.kernel.org/linux-mm/A5A976CB-DB57-4513-A700-656580488AB6@flyingcircus.io/
[ kasong@tencent.com: minor adjustment of variable declarations ]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 79a61cc3fc0466ad2b7b89618a6157785f0293b3 upstream.
As Jann points out, PFN mappings are special, because unlike normal
memory mappings, there is no lifetime information associated with the
mapping - it is just a raw mapping of PFNs with no reference counting of
a 'struct page'.
That's all very much intentional, but it does mean that it's easy to
mess up the cleanup in case of errors. Yes, a failed mmap() will always
eventually clean up any partial mappings, but without any explicit
lifetime in the page table mapping itself, it's very easy to do the
error handling in the wrong order.
In particular, it's easy to mistakenly free the physical backing store
before the page tables are actually cleaned up and (temporarily) have
stale dangling PTE entries.
To make this situation less error-prone, just make sure that any partial
pfn mapping is torn down early, before any other error handling.
Reported-and-tested-by: Jann Horn <jannh@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Simona Vetter <simona.vetter@ffwll.ch>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9972605a238339b85bd16b084eed5f18414d22db upstream.
Commit 73f576c04b ("mm: memcontrol: fix cgroup creation failure after
many small jobs") decoupled the memcg IDs from the CSS ID space to fix the
cgroup creation failures. It introduced IDR to maintain the memcg ID
space. The IDR depends on external synchronization mechanisms for
modifications. For the mem_cgroup_idr, the idr_alloc() and idr_replace()
happen within css callback and thus are protected through cgroup_mutex
from concurrent modifications. However idr_remove() for mem_cgroup_idr
was not protected against concurrency and can be run concurrently for
different memcgs when they hit their refcnt to zero. Fix that.
We have been seeing list_lru based kernel crashes at a low frequency in
our fleet for a long time. These crashes were in different part of
list_lru code including list_lru_add(), list_lru_del() and reparenting
code. Upon further inspection, it looked like for a given object (dentry
and inode), the super_block's list_lru didn't have list_lru_one for the
memcg of that object. The initial suspicions were either the object is
not allocated through kmem_cache_alloc_lru() or somehow
memcg_list_lru_alloc() failed to allocate list_lru_one() for a memcg but
returned success. No evidence were found for these cases.
Looking more deeply, we started seeing situations where valid memcg's id
is not present in mem_cgroup_idr and in some cases multiple valid memcgs
have same id and mem_cgroup_idr is pointing to one of them. So, the most
reasonable explanation is that these situations can happen due to race
between multiple idr_remove() calls or race between
idr_alloc()/idr_replace() and idr_remove(). These races are causing
multiple memcgs to acquire the same ID and then offlining of one of them
would cleanup list_lrus on the system for all of them. Later access from
other memcgs to the list_lru cause crashes due to missing list_lru_one.
Link: https://lkml.kernel.org/r/20240802235822.1830976-1-shakeel.butt@linux.dev
Fixes: 73f576c04b ("mm: memcontrol: fix cgroup creation failure after many small jobs")
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Muchun Song <muchun.song@linux.dev>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ Adapted over commit 6f0df8e16eb5 ("memcontrol: ensure memcg acquired by id is
properly set up") not in the tree ]
Signed-off-by: Tomas Krcka <krckatom@amazon.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ea72ce5da22806d5713f3ffb39a6d5ae73841f93 upstream.
iounmap() on x86 occasionally fails to unmap because the provided valid
ioremap address is not below high_memory. It turned out that this
happens due to KASLR.
KASLR uses the full address space between PAGE_OFFSET and vaddr_end to
randomize the starting points of the direct map, vmalloc and vmemmap
regions. It thereby limits the size of the direct map by using the
installed memory size plus an extra configurable margin for hot-plug
memory. This limitation is done to gain more randomization space
because otherwise only the holes between the direct map, vmalloc,
vmemmap and vaddr_end would be usable for randomizing.
The limited direct map size is not exposed to the rest of the kernel, so
the memory hot-plug and resource management related code paths still
operate under the assumption that the available address space can be
determined with MAX_PHYSMEM_BITS.
request_free_mem_region() allocates from (1 << MAX_PHYSMEM_BITS) - 1
downwards. That means the first allocation happens past the end of the
direct map and if unlucky this address is in the vmalloc space, which
causes high_memory to become greater than VMALLOC_START and consequently
causes iounmap() to fail for valid ioremap addresses.
MAX_PHYSMEM_BITS cannot be changed for that because the randomization
does not align with address bit boundaries and there are other places
which actually require to know the maximum number of address bits. All
remaining usage sites of MAX_PHYSMEM_BITS have been analyzed and found
to be correct.
Cure this by exposing the end of the direct map via PHYSMEM_END and use
that for the memory hot-plug and resource management related places
instead of relying on MAX_PHYSMEM_BITS. In the KASLR case PHYSMEM_END
maps to a variable which is initialized by the KASLR initialization and
otherwise it is based on MAX_PHYSMEM_BITS as before.
To prevent future hickups add a check into add_pages() to catch callers
trying to add memory above PHYSMEM_END.
Fixes: 0483e1fa6e ("x86/mm: Implement ASLR for kernel memory regions")
Reported-by: Max Ramanouski <max8rr8@gmail.com>
Reported-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-By: Max Ramanouski <max8rr8@gmail.com>
Tested-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/87ed6soy3z.ffs@tglx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 61ebe5a747da649057c37be1c37eb934b4af79ca upstream.
The __vmap_pages_range_noflush() assumes its argument pages** contains
pages with the same page shift. However, since commit e9c3cda4d86e ("mm,
vmalloc: fix high order __GFP_NOFAIL allocations"), if gfp_flags includes
__GFP_NOFAIL with high order in vm_area_alloc_pages() and page allocation
failed for high order, the pages** may contain two different page shifts
(high order and order-0). This could lead __vmap_pages_range_noflush() to
perform incorrect mappings, potentially resulting in memory corruption.
Users might encounter this as follows (vmap_allow_huge = true, 2M is for
PMD_SIZE):
kvmalloc(2M, __GFP_NOFAIL|GFP_X)
__vmalloc_node_range_noprof(vm_flags=VM_ALLOW_HUGE_VMAP)
vm_area_alloc_pages(order=9) ---> order-9 allocation failed and fallback to order-0
vmap_pages_range()
vmap_pages_range_noflush()
__vmap_pages_range_noflush(page_shift = 21) ----> wrong mapping happens
We can remove the fallback code because if a high-order allocation fails,
__vmalloc_node_range_noprof() will retry with order-0. Therefore, it is
unnecessary to fallback to order-0 here. Therefore, fix this by removing
the fallback code.
Link: https://lkml.kernel.org/r/20240808122019.3361-1-hailong.liu@oppo.com
Fixes: e9c3cda4d86e ("mm, vmalloc: fix high order __GFP_NOFAIL allocations")
Signed-off-by: Hailong Liu <hailong.liu@oppo.com>
Reported-by: Tangquan Zheng <zhengtangquan@oppo.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Acked-by: Barry Song <baohua@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6e284c55fc0bef7d25fd34d29db11f483da60ea4 upstream.
Function kmem_dump_obj() will splat if passed a pointer to a non-slab
object. So nothing calls it directly, instead calling kmem_valid_obj()
first to determine whether the passed pointer to a valid slab object. This
means that merging kmem_valid_obj() into kmem_dump_obj() will make the
code more concise. Therefore, convert kmem_dump_obj() to work the same
way as vmalloc_dump_obj(), removing the need for the kmem_dump_obj()
caller to check kmem_valid_obj(). After this, there are no remaining
calls to kmem_valid_obj() anymore, and it can be safely removed.
Suggested-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 046667c4d3196938e992fba0dfcde570aa85cd0e upstream.
we are *not* guaranteed that anything past the terminating NUL
is mapped (let alone initialized with anything sane).
Fixes: 0dea116876 ("cgroup: implement eventfd-based generic API for notifications")
Cc: stable@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d75abd0d0bc29e6ebfebbf76d11b4067b35844af upstream.
The memory_failure_cpu structure is a per-cpu structure. Access to its
content requires the use of get_cpu_var() to lock in the current CPU and
disable preemption. The use of a regular spinlock_t for locking purpose
is fine for a non-RT kernel.
Since the integration of RT spinlock support into the v5.15 kernel, a
spinlock_t in a RT kernel becomes a sleeping lock and taking a sleeping
lock in a preemption disabled context is illegal resulting in the
following kind of warning.
[12135.732244] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
[12135.732248] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 270076, name: kworker/0:0
[12135.732252] preempt_count: 1, expected: 0
[12135.732255] RCU nest depth: 2, expected: 2
:
[12135.732420] Hardware name: Dell Inc. PowerEdge R640/0HG0J8, BIOS 2.10.2 02/24/2021
[12135.732423] Workqueue: kacpi_notify acpi_os_execute_deferred
[12135.732433] Call Trace:
[12135.732436] <TASK>
[12135.732450] dump_stack_lvl+0x57/0x81
[12135.732461] __might_resched.cold+0xf4/0x12f
[12135.732479] rt_spin_lock+0x4c/0x100
[12135.732491] memory_failure_queue+0x40/0xe0
[12135.732503] ghes_do_memory_failure+0x53/0x390
[12135.732516] ghes_do_proc.constprop.0+0x229/0x3e0
[12135.732575] ghes_proc+0xf9/0x1a0
[12135.732591] ghes_notify_hed+0x6a/0x150
[12135.732602] notifier_call_chain+0x43/0xb0
[12135.732626] blocking_notifier_call_chain+0x43/0x60
[12135.732637] acpi_ev_notify_dispatch+0x47/0x70
[12135.732648] acpi_os_execute_deferred+0x13/0x20
[12135.732654] process_one_work+0x41f/0x500
[12135.732695] worker_thread+0x192/0x360
[12135.732715] kthread+0x111/0x140
[12135.732733] ret_from_fork+0x29/0x50
[12135.732779] </TASK>
Fix it by using a raw_spinlock_t for locking instead.
Also move the pr_err() out of the lock critical section and after
put_cpu_ptr() to avoid indeterminate latency and the possibility of sleep
with this call.
[longman@redhat.com: don't hold percpu ref across pr_err(), per Miaohe]
Link: https://lkml.kernel.org/r/20240807181130.1122660-1-longman@redhat.com
Link: https://lkml.kernel.org/r/20240806164107.1044956-1-longman@redhat.com
Fixes: 0f383b6dc9 ("locking/spinlock: Provide RT variant")
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is the 6.1.84 stable release
* tag 'v6.1.84': (1865 commits)
Linux 6.1.84
tools/resolve_btfids: fix build with musl libc
USB: core: Fix deadlock in usb_deauthorize_interface()
x86/sev: Skip ROM range scans and validation for SEV-SNP guests
scsi: libsas: Fix disk not being scanned in after being removed
scsi: libsas: Add a helper sas_get_sas_addr_and_dev_type()
scsi: lpfc: Correct size for wqe for memset()
scsi: lpfc: Correct size for cmdwqe/rspwqe for memset()
tls: fix use-after-free on failed backlog decryption
x86/cpu: Enable STIBP on AMD if Automatic IBRS is enabled
scsi: qla2xxx: Delay I/O Abort on PCI error
scsi: qla2xxx: Change debug message during driver unload
scsi: qla2xxx: Fix double free of fcport
scsi: qla2xxx: Fix command flush on cable pull
scsi: qla2xxx: NVME|FCP prefer flag not being honored
scsi: qla2xxx: Update manufacturer detail
scsi: qla2xxx: Split FCE|EFT trace control
scsi: qla2xxx: Fix N2N stuck connection
scsi: qla2xxx: Prevent command send on chip reset
usb: typec: ucsi: Clear UCSI_CCI_RESET_COMPLETE before reset
...
Change-Id: If6edd552c88012d97f5eefc5e1d97a4f1683f171
Conflicts:
drivers/gpu/drm/bridge/sii902x.c
drivers/gpu/drm/rockchip/rockchip_lvds.c
drivers/media/i2c/imx335.c
drivers/usb/dwc3/gadget.c
drivers/usb/host/xhci-plat.c
sound/soc/rockchip/rockchip_i2s_tdm.c
commit 5596d9e8b553dacb0ac34bcf873cbbfb16c3ba3e upstream.
There is a potential race between __update_and_free_hugetlb_folio() and
try_memory_failure_hugetlb():
CPU1 CPU2
__update_and_free_hugetlb_folio try_memory_failure_hugetlb
folio_test_hugetlb
-- It's still hugetlb folio.
folio_clear_hugetlb_hwpoison
spin_lock_irq(&hugetlb_lock);
__get_huge_page_for_hwpoison
folio_set_hugetlb_hwpoison
spin_unlock_irq(&hugetlb_lock);
spin_lock_irq(&hugetlb_lock);
__folio_clear_hugetlb(folio);
-- Hugetlb flag is cleared but too late.
spin_unlock_irq(&hugetlb_lock);
When the above race occurs, raw error page info will be leaked. Even
worse, raw error pages won't have hwpoisoned flag set and hit
pcplists/buddy. Fix this issue by deferring
folio_clear_hugetlb_hwpoison() until __folio_clear_hugetlb() is done. So
all raw error pages will have hwpoisoned flag set.
Link: https://lkml.kernel.org/r/20240708025127.107713-1-linmiaohe@huawei.com
Fixes: 32c877191e02 ("hugetlb: do not clear hugetlb dtor until allocating vmemmap")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Muchun Song <muchun.song@linux.dev>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
