There are two pointers in struct xfrm_state_offload, *dev, *real_dev.
These are used in callback functions of struct xfrmdev_ops.
The *dev points whether bonding interface or real interface.
If bonding ipsec offload is used, it points bonding interface If not,
it points real interface.
And real_dev always points real interface.
So, netdevsim should always use real_dev instead of dev.
Of course, real_dev always not be null.
Test commands:
ip netns add A
ip netns exec A bash
modprobe netdevsim
echo "1 1" > /sys/bus/netdevsim/new_device
ip link add bond0 type bond mode active-backup
ip link set eth0 master bond0
ip link set eth0 up
ip link set bond0 up
ip x s add proto esp dst 14.1.1.1 src 15.1.1.1 spi 0x07 mode \
transport reqid 0x07 replay-window 32 aead 'rfc4106(gcm(aes))' \
0x44434241343332312423222114131211f4f3f2f1 128 sel src 14.0.0.52/24 \
dst 14.0.0.70/24 proto tcp offload dev bond0 dir in
Splat looks like:
BUG: spinlock bad magic on CPU#5, kworker/5:1/53
lock: 0xffff8881068c2cc8, .magic: 11121314, .owner: <none>/-1,
.owner_cpu: -235736076
CPU: 5 PID: 53 Comm: kworker/5:1 Not tainted 5.13.0-rc3+ #1168
Workqueue: events linkwatch_event
Call Trace:
dump_stack+0xa4/0xe5
do_raw_spin_lock+0x20b/0x270
? rwlock_bug.part.1+0x90/0x90
_raw_spin_lock_nested+0x5f/0x70
bond_get_stats+0xe4/0x4c0 [bonding]
? rcu_read_lock_sched_held+0xc0/0xc0
? bond_neigh_init+0x2c0/0x2c0 [bonding]
? dev_get_alias+0xe2/0x190
? dev_get_port_parent_id+0x14a/0x360
? rtnl_unregister+0x190/0x190
? dev_get_phys_port_name+0xa0/0xa0
? memset+0x1f/0x40
? memcpy+0x38/0x60
? rtnl_phys_switch_id_fill+0x91/0x100
dev_get_stats+0x8c/0x270
rtnl_fill_stats+0x44/0xbe0
? nla_put+0xbe/0x140
rtnl_fill_ifinfo+0x1054/0x3ad0
[ ... ]
Fixes: 272c2330ad ("xfrm: bail early on slave pass over skb")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
devlink_trap tests for the netdevsim fail due to misspelled
debugfs file name. Change this name, as well as name of callback
function, to match the naming as in the devlink itself - 'trap_drop_counter'.
Test-results:
selftests: drivers/net/netdevsim: devlink_trap.sh
TEST: Initialization [ OK ]
TEST: Trap action [ OK ]
TEST: Trap metadata [ OK ]
TEST: Non-existing trap [ OK ]
TEST: Non-existing trap action [ OK ]
TEST: Trap statistics [ OK ]
TEST: Trap group action [ OK ]
TEST: Non-existing trap group [ OK ]
TEST: Trap group statistics [ OK ]
TEST: Trap policer [ OK ]
TEST: Trap policer binding [ OK ]
TEST: Port delete [ OK ]
TEST: Device delete [ OK ]
Fixes: a7b3527a43 ("drivers: net: netdevsim: add devlink trap_drop_counter_get implementation")
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Whenever query statistics is issued for trap with DROP action,
devlink subsystem would also fill-in statistics 'dropped' field.
In case if device driver did't register callback for hard drop
statistics querying, 'dropped' field will be omitted and not filled.
Add trap_drop_counter_get callback implementation to the netdevsim.
Add new test cases for netdevsim, to test both the callback
functionality, as well as drop statistics alteration check.
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
In normal situations where the driver doesn't dereference
"nsim_node->ddir" or "nsim_node->rate_parent" itself then we are not
supposed to check the return from debugfs functions. In the case of
debugfs_create_dir() the check was wrong as well because it doesn't
return NULL, it returns error pointers.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The comparison of len < 0 is always false because len is a size_t. Fix
this by making len a ssize_t instead.
Addresses-Coverity: ("Unsigned compared against 0")
Fixes: d395381909 ("netdevsim: Add max_vfs to bus_dev")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement new devlink ops that allow setting rate node as a parent for
devlink port (leaf) or another devlink node through devlink API.
Expose parent names to netdevsim debugfs in read only mode.
Co-developed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement new devlink ops that allow creation, deletion and setting of
shared/max tx rate of devlink rate nodes through devlink API.
Expose rate node and it's tx rates to netdevsim debugfs.
Co-developed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement new devlink ops that allow shared and max tx rate control for
devlink port rate objects (leafs) through devlink API.
Expose rate values of VF ports to netdevsim debugfs.
Co-developed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement callbacks to set/get eswitch mode value. Add helpers to check
current mode.
Instantiate VFs' net devices and devlink ports on switchdev enabling and
remove them on legacy enabling. Changing number of VFs while in
switchdev mode triggers VFs creation/deletion.
Also disable NDO API callback to set VF rate, since it's legacy API.
Switchdev API to set VF rate will be implemented in one of the next
patches.
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow creation of netdevsim ports for VFs along with allocations of
corresponding net devices and devlink ports.
Add enums and helpers to distinguish PFs' ports from VFs' ports.
Ports creation/deletion debugfs API intended to be used with physical
ports only.
VFs instantiation will be done in one of the next patches.
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Define type of ports, which netdevsim driver currently operates with as
PF. Define new port type - VF, which will be implemented in following
patches. Add helper functions to distinguish them. Add helper function
to get VF index from port index.
Add port indexing logic where PFs' indexes starts from 0, VFs' - from
NSIM_DEV_VF_PORT_INDEX_BASE.
All ports uses same index pool, which means that PF port may be created
with index from VFs' indexes range.
Maximum number of VFs, which the driver can allocate, is limited by
UINT_MAX - BASE.
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move VFs disabling from device release() to nsim_dev_reload_destroy() to
make VFs disabling and ports removal simultaneous.
This is a requirement for VFs ports implemented in next patches.
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently there is no limit to the number of VFs netdevsim can enable.
In a real systems this value exist and used by the driver.
Fore example, some features might need to consider this value when
allocating memory.
Expose max_vfs variable to debugfs as configurable resource. If are VFs
configured (num_vfs != 0) then changing of max_vfs not allowed.
Co-developed-by: Yuval Avnery <yuvalav@nvidia.com>
Signed-off-by: Yuval Avnery <yuvalav@nvidia.com>
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the sampling truncation length is invalid (zero), pass the length
of the packet. Without the fix, no payload is reported to user space
when the truncation length is zero.
Fixes: a8700c3dd0 ("netdevsim: Add dummy psample implementation")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eliminate the following coccicheck warning:
drivers/net/netdevsim/fib.c:569:2-3: Unneeded semicolon
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for ethtool FEC and some ethtool error injection.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow netdevsim to report "sampled" packets to the psample module by
periodically generating packets from a work queue. The behavior can be
enabled / disabled (default) and the various meta data attributes can be
controlled via debugfs knobs.
This implementation enables both testing of the psample module with all
the optional attributes as well as development of user space
applications on top of psample such as hsflowd and a Wireshark dissector
for psample generic netlink packets.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A key component of the resilient hashing algorithm is the hash buckets'
activity. If a bucket is active, it will not be populated with a new
nexthop in order not to break existing flows. Therefore, in order to
easily and thoroughly test the algorithm, we need to be in full control
over the reported activity.
Add a debugfs interface that allows user space to have netdevsim report
a nexthop bucket within a resilient nexthop group as active. For
example:
# echo 10 23 > /sys/kernel/debug/netdevsim/netdevsim10/fib/nexthop_bucket_activity
Will mark bucket 23 in nexthop group 10 as active.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow resilient nexthop groups to be programmed and account their
occupancy according to their number of buckets. The nexthop group itself
as well as its buckets are marked with hardware flags (i.e.,
'RTNH_F_TRAP').
Replacement of a single nexthop bucket can fail using the following
debugfs knob:
# cat /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_nexthop_bucket_replace
N
# echo 1 > /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_nexthop_bucket_replace
# cat /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_nexthop_bucket_replace
Y
Replacement of a resilient nexthop group can fail using the following
debugfs knob:
# cat /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_res_nexthop_group_replace
N
# echo 1 > /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_res_nexthop_group_replace
# cat /sys/kernel/debug/netdevsim/netdevsim10/fib/fail_res_nexthop_group_replace
Y
This enables testing of various error paths.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of calling nexthop_set_hw_flags(), call a helper. It will be
used to also set nexthop bucket flags in a subsequent patch.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently netdevsim relies on RTNL to maintain exclusivity in accessing the
nexthop hash table. However, bucket notification may be called without RTNL
having been held. Instead, introduce a custom lock to guard the table.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
