The purpose of balance_push() is to act as a filter on task selection
in the case of CPU hotplug, specifically when taking the CPU out.
It does this by (ab)using the balance callback infrastructure, with
the express purpose of keeping all the unlikely/odd cases in a single
place.
In order to serve its purpose, the balance_push_callback needs to be
(exclusively) on the callback list at all times (noting that the
callback always places itself back on the list the moment it runs,
also noting that when the CPU goes down, regular balancing concerns
are moot, so ignoring them is fine).
And here-in lies the problem, __sched_setscheduler()'s use of
splice_balance_callbacks() takes the callbacks off the list across a
lock-break, making it possible for, an interleaving, __schedule() to
see an empty list and not get filtered.
Fixes: ae79270232 ("sched: Optimize finish_lock_switch()")
Reported-by: Jing-Ting Wu <jing-ting.wu@mediatek.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Jing-Ting Wu <jing-ting.wu@mediatek.com>
Link: https://lkml.kernel.org/r/20220519134706.GH2578@worktop.programming.kicks-ass.net
Pull scheduler fix from Thomas Gleixner:
"Fix the fallout of sysctl code move which placed the init function
wrong"
* tag 'sched-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/autogroup: Fix sysctl move
Pull ptrace_stop cleanups from Eric Biederman:
"While looking at the ptrace problems with PREEMPT_RT and the problems
Peter Zijlstra was encountering with ptrace in his freezer rewrite I
identified some cleanups to ptrace_stop that make sense on their own
and move make resolving the other problems much simpler.
The biggest issue is the habit of the ptrace code to change
task->__state from the tracer to suppress TASK_WAKEKILL from waking up
the tracee. No other code in the kernel does that and it is straight
forward to update signal_wake_up and friends to make that unnecessary.
Peter's task freezer sets frozen tasks to a new state TASK_FROZEN and
then it stores them by calling "wake_up_state(t, TASK_FROZEN)" relying
on the fact that all stopped states except the special stop states can
tolerate spurious wake up and recover their state.
The state of stopped and traced tasked is changed to be stored in
task->jobctl as well as in task->__state. This makes it possible for
the freezer to recover tasks in these special states, as well as
serving as a general cleanup. With a little more work in that
direction I believe TASK_STOPPED can learn to tolerate spurious wake
ups and become an ordinary stop state.
The TASK_TRACED state has to remain a special state as the registers
for a process are only reliably available when the process is stopped
in the scheduler. Fundamentally ptrace needs acess to the saved
register values of a task.
There are bunch of semi-random ptrace related cleanups that were found
while looking at these issues.
One cleanup that deserves to be called out is from commit 57b6de08b5
("ptrace: Admit ptrace_stop can generate spuriuos SIGTRAPs"). This
makes a change that is technically user space visible, in the handling
of what happens to a tracee when a tracer dies unexpectedly. According
to our testing and our understanding of userspace nothing cares that
spurious SIGTRAPs can be generated in that case"
* tag 'ptrace_stop-cleanup-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
sched,signal,ptrace: Rework TASK_TRACED, TASK_STOPPED state
ptrace: Always take siglock in ptrace_resume
ptrace: Don't change __state
ptrace: Admit ptrace_stop can generate spuriuos SIGTRAPs
ptrace: Document that wait_task_inactive can't fail
ptrace: Reimplement PTRACE_KILL by always sending SIGKILL
signal: Use lockdep_assert_held instead of assert_spin_locked
ptrace: Remove arch_ptrace_attach
ptrace/xtensa: Replace PT_SINGLESTEP with TIF_SINGLESTEP
ptrace/um: Replace PT_DTRACE with TIF_SINGLESTEP
signal: Replace __group_send_sig_info with send_signal_locked
signal: Rename send_signal send_signal_locked
Pull kthread updates from Eric Biederman:
"This updates init and user mode helper tasks to be ordinary user mode
tasks.
Commit 40966e316f ("kthread: Ensure struct kthread is present for
all kthreads") caused init and the user mode helper threads that call
kernel_execve to have struct kthread allocated for them. This struct
kthread going away during execve in turned made a use after free of
struct kthread possible.
Here, commit 343f4c49f2 ("kthread: Don't allocate kthread_struct for
init and umh") is enough to fix the use after free and is simple
enough to be backportable.
The rest of the changes pass struct kernel_clone_args to clean things
up and cause the code to make sense.
In making init and the user mode helpers tasks purely user mode tasks
I ran into two complications. The function task_tick_numa was
detecting tasks without an mm by testing for the presence of
PF_KTHREAD. The initramfs code in populate_initrd_image was using
flush_delayed_fput to ensuere the closing of all it's file descriptors
was complete, and flush_delayed_fput does not work in a userspace
thread.
I have looked and looked and more complications and in my code review
I have not found any, and neither has anyone else with the code
sitting in linux-next"
* tag 'kthread-cleanups-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
sched: Update task_tick_numa to ignore tasks without an mm
fork: Stop allowing kthreads to call execve
fork: Explicitly set PF_KTHREAD
init: Deal with the init process being a user mode process
fork: Generalize PF_IO_WORKER handling
fork: Explicity test for idle tasks in copy_thread
fork: Pass struct kernel_clone_args into copy_thread
kthread: Don't allocate kthread_struct for init and umh
Pull sysctl updates from Luis Chamberlain:
"For two kernel releases now kernel/sysctl.c has been being cleaned up
slowly, since the tables were grossly long, sprinkled with tons of
#ifdefs and all this caused merge conflicts with one susbystem or
another.
This tree was put together to help try to avoid conflicts with these
cleanups going on different trees at time. So nothing exciting on this
pull request, just cleanups.
Thanks a lot to the Uniontech and Huawei folks for doing some of this
nasty work"
* tag 'sysctl-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (28 commits)
sched: Fix build warning without CONFIG_SYSCTL
reboot: Fix build warning without CONFIG_SYSCTL
kernel/kexec_core: move kexec_core sysctls into its own file
sysctl: minor cleanup in new_dir()
ftrace: fix building with SYSCTL=y but DYNAMIC_FTRACE=n
fs/proc: Introduce list_for_each_table_entry for proc sysctl
mm: fix unused variable kernel warning when SYSCTL=n
latencytop: move sysctl to its own file
ftrace: fix building with SYSCTL=n but DYNAMIC_FTRACE=y
ftrace: Fix build warning
ftrace: move sysctl_ftrace_enabled to ftrace.c
kernel/do_mount_initrd: move real_root_dev sysctls to its own file
kernel/delayacct: move delayacct sysctls to its own file
kernel/acct: move acct sysctls to its own file
kernel/panic: move panic sysctls to its own file
kernel/lockdep: move lockdep sysctls to its own file
mm: move page-writeback sysctls to their own file
mm: move oom_kill sysctls to their own file
kernel/reboot: move reboot sysctls to its own file
sched: Move energy_aware sysctls to topology.c
...
Pull scheduler updates from Ingo Molnar:
- Updates to scheduler metrics:
- PELT fixes & enhancements
- PSI fixes & enhancements
- Refactor cpu_util_without()
- Updates to instrumentation/debugging:
- Remove sched_trace_*() helper functions - can be done via debug
info
- Fix double update_rq_clock() warnings
- Introduce & use "preemption model accessors" to simplify some of the
Kconfig complexity.
- Make softirq handling RT-safe.
- Misc smaller fixes & cleanups.
* tag 'sched-core-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
topology: Remove unused cpu_cluster_mask()
sched: Reverse sched_class layout
sched/deadline: Remove superfluous rq clock update in push_dl_task()
sched/core: Avoid obvious double update_rq_clock warning
smp: Make softirq handling RT safe in flush_smp_call_function_queue()
smp: Rename flush_smp_call_function_from_idle()
sched: Fix missing prototype warnings
sched/fair: Remove cfs_rq_tg_path()
sched/fair: Remove sched_trace_*() helper functions
sched/fair: Refactor cpu_util_without()
sched/fair: Revise comment about lb decision matrix
sched/psi: report zeroes for CPU full at the system level
sched/fair: Delete useless condition in tg_unthrottle_up()
sched/fair: Fix cfs_rq_clock_pelt() for throttled cfs_rq
sched/fair: Move calculate of avg_load to a better location
mailmap: Update my email address to @redhat.com
MAINTAINERS: Add myself as scheduler topology reviewer
psi: Fix trigger being fired unexpectedly at initial
ftrace: Use preemption model accessors for trace header printout
kcsan: Use preemption model accessors
Pull locking updates from Ingo Molnar:
- rwsem cleanups & optimizations/fixes:
- Conditionally wake waiters in reader/writer slowpaths
- Always try to wake waiters in out_nolock path
- Add try_cmpxchg64() implementation, with arch optimizations - and use
it to micro-optimize sched_clock_{local,remote}()
- Various force-inlining fixes to address objdump instrumentation-check
warnings
- Add lock contention tracepoints:
lock:contention_begin
lock:contention_end
- Misc smaller fixes & cleanups
* tag 'locking-core-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/clock: Use try_cmpxchg64 in sched_clock_{local,remote}
locking/atomic/x86: Introduce arch_try_cmpxchg64
locking/atomic: Add generic try_cmpxchg64 support
futex: Remove a PREEMPT_RT_FULL reference.
locking/qrwlock: Change "queue rwlock" to "queued rwlock"
lockdep: Delete local_irq_enable_in_hardirq()
locking/mutex: Make contention tracepoints more consistent wrt adaptive spinning
locking: Apply contention tracepoints in the slow path
locking: Add lock contention tracepoints
locking/rwsem: Always try to wake waiters in out_nolock path
locking/rwsem: Conditionally wake waiters in reader/writer slowpaths
locking/rwsem: No need to check for handoff bit if wait queue empty
lockdep: Fix -Wunused-parameter for _THIS_IP_
x86/mm: Force-inline __phys_addr_nodebug()
x86/kvm/svm: Force-inline GHCB accessors
task_stack, x86/cea: Force-inline stack helpers
Pull RCU update from Paul McKenney:
- Documentation updates
- Miscellaneous fixes
- Callback-offloading updates, mainly simplifications
- RCU-tasks updates, including some -rt fixups, handling of systems
with sparse CPU numbering, and a fix for a boot-time race-condition
failure
- Put SRCU on a memory diet in order to reduce the size of the
srcu_struct structure
- Torture-test updates fixing some bugs in tests and closing some
testing holes
- Torture-test updates for the RCU tasks flavors, most notably ensuring
that building rcutorture and friends does not change the
RCU-tasks-related Kconfig options
- Torture-test scripting updates
- Expedited grace-period updates, most notably providing
milliseconds-scale (not all that) soft real-time response from
synchronize_rcu_expedited().
This is also the first time in almost 30 years of RCU that someone
other than me has pushed for a reduction in the RCU CPU stall-warning
timeout, in this case by more than three orders of magnitude from 21
seconds to 20 milliseconds. This tighter timeout applies only to
expedited grace periods
* tag 'rcu.2022.05.19a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (80 commits)
rcu: Move expedited grace period (GP) work to RT kthread_worker
rcu: Introduce CONFIG_RCU_EXP_CPU_STALL_TIMEOUT
srcu: Drop needless initialization of sdp in srcu_gp_start()
srcu: Prevent expedited GPs and blocking readers from consuming CPU
srcu: Add contention check to call_srcu() srcu_data ->lock acquisition
srcu: Automatically determine size-transition strategy at boot
rcutorture: Make torture.sh allow for --kasan
rcutorture: Make torture.sh refscale and rcuscale specify Tasks Trace RCU
rcutorture: Make kvm.sh allow more memory for --kasan runs
torture: Save "make allmodconfig" .config file
scftorture: Remove extraneous "scf" from per_version_boot_params
rcutorture: Adjust scenarios' Kconfig options for CONFIG_PREEMPT_DYNAMIC
torture: Enable CSD-lock stall reports for scftorture
torture: Skip vmlinux check for kvm-again.sh runs
scftorture: Adjust for TASKS_RCU Kconfig option being selected
rcuscale: Allow rcuscale without RCU Tasks Rude/Trace
rcuscale: Allow rcuscale without RCU Tasks
refscale: Allow refscale without RCU Tasks Rude/Trace
refscale: Allow refscale without RCU Tasks
rcutorture: Allow specifying per-scenario stat_interval
...
Commit fa2c3254d7 (sched/tracing: Don't re-read p->state when emitting
sched_switch event, 2022-01-20) added a new prev_state argument to the
sched_switch tracepoint, before the prev task_struct pointer.
This reordering of arguments broke BPF programs that use the raw
tracepoint (e.g. tp_btf programs). The type of the second argument has
changed and existing programs that assume a task_struct* argument
(e.g. for bpf_task_storage access) will now fail to verify.
If we instead append the new argument to the end, all existing programs
would continue to work and can conditionally extract the prev_state
argument on supported kernel versions.
Fixes: fa2c3254d7 (sched/tracing: Don't re-read p->state when emitting sched_switch event, 2022-01-20)
Signed-off-by: Delyan Kratunov <delyank@fb.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lkml.kernel.org/r/c8a6930dfdd58a4a5755fc01732675472979732b.camel@fb.com
Stop playing with tsk->__state to remove TASK_WAKEKILL while a ptrace
command is executing.
Instead remove TASK_WAKEKILL from the definition of TASK_TRACED, and
implement a new jobctl flag TASK_PTRACE_FROZEN. This new flag is set
in jobctl_freeze_task and cleared when ptrace_stop is awoken or in
jobctl_unfreeze_task (when ptrace_stop remains asleep).
In signal_wake_up add __TASK_TRACED to state along with TASK_WAKEKILL
when the wake up is for a fatal signal. Skip adding __TASK_TRACED
when TASK_PTRACE_FROZEN is not set. This has the same effect as
changing TASK_TRACED to __TASK_TRACED as all of the wake_ups that use
TASK_KILLABLE go through signal_wake_up.
Handle a ptrace_stop being called with a pending fatal signal.
Previously it would have been handled by schedule simply failing to
sleep. As TASK_WAKEKILL is no longer part of TASK_TRACED schedule
will sleep with a fatal_signal_pending. The code in signal_wake_up
guarantees that the code will be awaked by any fatal signal that
codes after TASK_TRACED is set.
Previously the __state value of __TASK_TRACED was changed to
TASK_RUNNING when woken up or back to TASK_TRACED when the code was
left in ptrace_stop. Now when woken up ptrace_stop now clears
JOBCTL_PTRACE_FROZEN and when left sleeping ptrace_unfreezed_traced
clears JOBCTL_PTRACE_FROZEN.
Tested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lkml.kernel.org/r/20220505182645.497868-10-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Qian Cai <quic_qiancai@quicinc.com> wrote:
> Reverting the last 3 commits of the series fixed a boot crash.
>
> 1b2552cbdb fork: Stop allowing kthreads to call execve
> 753550eb0c fork: Explicitly set PF_KTHREAD
> 68d85f0a33 init: Deal with the init process being a user mode process
>
> BUG: KASAN: null-ptr-deref in task_nr_scan_windows.isra.0
> arch_atomic_long_read at ./include/linux/atomic/atomic-long.h:29
> (inlined by) atomic_long_read at ./include/linux/atomic/atomic-instrumented.h:1266
> (inlined by) get_mm_counter at ./include/linux/mm.h:1996
> (inlined by) get_mm_rss at ./include/linux/mm.h:2049
> (inlined by) task_nr_scan_windows at kernel/sched/fair.c:1123
> Read of size 8 at addr 00000000000003d0 by task swapper/0/1
With the change to init and the user mode helper processes to not have
PF_KTHREAD set before they call kernel_execve the PF_KTHREAD test in
task_tick_numa became insufficient to detect all tasks that have
"->mm == NULL". Correct that by testing for "->mm == NULL" directly.
Reported-by: Qian Cai <quic_qiancai@quicinc.com>
Tested-by: Qian Cai <quic_qiancai@quicinc.com>
Fixes: 1b2552cbdb ("fork: Stop allowing kthreads to call execve")
Link: https://lkml.kernel.org/r/87r150ug1l.fsf_-_@email.froward.int.ebiederm.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The change to call update_rq_clock() before activate_task()
commit 840d719604 ("sched/deadline: Update rq_clock of later_rq
when pushing a task") is no longer needed since commit f4904815f9
("sched/deadline: Fix double accounting of rq/running bw in push & pull")
removed the add_running_bw() before the activate_task().
So we remove some comments that are no longer needed and update
rq clock in activate_task().
Signed-off-by: Hao Jia <jiahao.os@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Link: https://lore.kernel.org/r/20220430085843.62939-3-jiahao.os@bytedance.com
When we use raw_spin_rq_lock() to acquire the rq lock and have to
update the rq clock while holding the lock, the kernel may issue
a WARN_DOUBLE_CLOCK warning.
Since we directly use raw_spin_rq_lock() to acquire rq lock instead of
rq_lock(), there is no corresponding change to rq->clock_update_flags.
In particular, we have obtained the rq lock of other CPUs, the
rq->clock_update_flags of this CPU may be RQCF_UPDATED at this time, and
then calling update_rq_clock() will trigger the WARN_DOUBLE_CLOCK warning.
So we need to clear RQCF_UPDATED of rq->clock_update_flags to avoid
the WARN_DOUBLE_CLOCK warning.
For the sched_rt_period_timer() and migrate_task_rq_dl() cases
we simply replace raw_spin_rq_lock()/raw_spin_rq_unlock() with
rq_lock()/rq_unlock().
For the {pull,push}_{rt,dl}_task() cases, we add the
double_rq_clock_clear_update() function to clear RQCF_UPDATED of
rq->clock_update_flags, and call double_rq_clock_clear_update()
before double_lock_balance()/double_rq_lock() returns to avoid the
WARN_DOUBLE_CLOCK warning.
Some call trace reports:
Call Trace 1:
<IRQ>
sched_rt_period_timer+0x10f/0x3a0
? enqueue_top_rt_rq+0x110/0x110
__hrtimer_run_queues+0x1a9/0x490
hrtimer_interrupt+0x10b/0x240
__sysvec_apic_timer_interrupt+0x8a/0x250
sysvec_apic_timer_interrupt+0x9a/0xd0
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x12/0x20
Call Trace 2:
<TASK>
activate_task+0x8b/0x110
push_rt_task.part.108+0x241/0x2c0
push_rt_tasks+0x15/0x30
finish_task_switch+0xaa/0x2e0
? __switch_to+0x134/0x420
__schedule+0x343/0x8e0
? hrtimer_start_range_ns+0x101/0x340
schedule+0x4e/0xb0
do_nanosleep+0x8e/0x160
hrtimer_nanosleep+0x89/0x120
? hrtimer_init_sleeper+0x90/0x90
__x64_sys_nanosleep+0x96/0xd0
do_syscall_64+0x34/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Call Trace 3:
<TASK>
deactivate_task+0x93/0xe0
pull_rt_task+0x33e/0x400
balance_rt+0x7e/0x90
__schedule+0x62f/0x8e0
do_task_dead+0x3f/0x50
do_exit+0x7b8/0xbb0
do_group_exit+0x2d/0x90
get_signal+0x9df/0x9e0
? preempt_count_add+0x56/0xa0
? __remove_hrtimer+0x35/0x70
arch_do_signal_or_restart+0x36/0x720
? nanosleep_copyout+0x39/0x50
? do_nanosleep+0x131/0x160
? audit_filter_inodes+0xf5/0x120
exit_to_user_mode_prepare+0x10f/0x1e0
syscall_exit_to_user_mode+0x17/0x30
do_syscall_64+0x40/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Call Trace 4:
update_rq_clock+0x128/0x1a0
migrate_task_rq_dl+0xec/0x310
set_task_cpu+0x84/0x1e4
try_to_wake_up+0x1d8/0x5c0
wake_up_process+0x1c/0x30
hrtimer_wakeup+0x24/0x3c
__hrtimer_run_queues+0x114/0x270
hrtimer_interrupt+0xe8/0x244
arch_timer_handler_phys+0x30/0x50
handle_percpu_devid_irq+0x88/0x140
generic_handle_domain_irq+0x40/0x60
gic_handle_irq+0x48/0xe0
call_on_irq_stack+0x2c/0x60
do_interrupt_handler+0x80/0x84
Steps to reproduce:
1. Enable CONFIG_SCHED_DEBUG when compiling the kernel
2. echo 1 > /sys/kernel/debug/clear_warn_once
echo "WARN_DOUBLE_CLOCK" > /sys/kernel/debug/sched/features
echo "NO_RT_PUSH_IPI" > /sys/kernel/debug/sched/features
3. Run some rt/dl tasks that periodically work and sleep, e.g.
Create 2*n rt or dl (90% running) tasks via rt-app (on a system
with n CPUs), and Dietmar Eggemann reports Call Trace 4 when running
on PREEMPT_RT kernel.
Signed-off-by: Hao Jia <jiahao.os@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20220430085843.62939-2-jiahao.os@bytedance.com
IF CONFIG_SYSCTL is n, build warn:
kernel/sched/core.c:1782:12: warning: ‘sysctl_sched_uclamp_handler’ defined but not used [-Wunused-function]
static int sysctl_sched_uclamp_handler(struct ctl_table *table, int write,
^~~~~~~~~~~~~~~~~~~~~~~~~~~
sysctl_sched_uclamp_handler() is used while CONFIG_SYSCTL enabled,
wrap all related code with CONFIG_SYSCTL to fix this.
Fixes: 3267e0156c ("sched: Move uclamp_util sysctls to core.c")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
- sched/core is on a pretty old -rc1 base - refresh it to include recent fixes.
- this also allows up to resolve a (trivial) .mailmap conflict
Conflicts:
.mailmap
Signed-off-by: Ingo Molnar <mingo@kernel.org>
cfs_rq_tg_path() is used by a tracepoint-to traceevent (tp-2-te)
converter to format the path of a taskgroup or autogroup respectively.
It doesn't have any in-kernel users after the removal of the
sched_trace_cfs_rq_path() helper function.
cfs_rq_tg_path() can be coded in a tp-2-te converter.
Remove it from kernel/sched/fair.c.
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220428144338.479094-3-qais.yousef@arm.com
We no longer need them as we can use DWARF debug info or BTF + pahole to
re-generate the required structs to compile against them for a given
kernel.
This moves the burden of maintaining these helper functions to the
module.
https://github.com/qais-yousef/sched_tp
Note that pahole v1.15 is required at least for using DWARF. And for BTF
v1.23 which is not yet released will be required. There's alignment
problem that will lead to crashes in earlier versions when used with
BTF.
We should have enough infrastructure to make these helper functions now
obsolete, so remove them.
[Rewrote commit message to reflect the new alternative]
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220428144338.479094-2-qais.yousef@arm.com
Except the 'task has no contribution or is new' condition at the
beginning of cpu_util_without(), which it shares with the load and
runnable counterpart functions, a cpu_util_next(..., dst_cpu = -1)
call can replace the rest of it.
The UTIL_EST specific check that task util_est has to be subtracted
from the CPU one in case of an enqueued (or current (to cater for the
wakeup - lb race)) task has to be moved to cpu_util_next().
This was initially introduced by commit c469933e77
("sched/fair: Fix cpu_util_wake() for 'execl' type workloads").
UnixBench's `execl` throughput tests were run on the dual socket 40
CPUs Intel E5-2690 v2 to make sure it doesn't regress again.
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20220318163656.954440-1-dietmar.eggemann@arm.com
If busiest group type is group_misfit_task, the local
group type must be group_has_spare according to below
code in update_sd_pick_busiest():
if (sgs->group_type == group_misfit_task &&
(!capacity_greater(capacity_of(env->dst_cpu), sg->sgc->max_capacity) ||
sds->local_stat.group_type != group_has_spare))
return false;
group type imbalanced and overloaded and fully_busy are filtered in here.
misfit and asym are filtered before in update_sg_lb_stats().
So, change the decision matrix to:
busiest \ local has_spare fully_busy misfit asym imbalanced overloaded
has_spare nr_idle balanced N/A N/A balanced balanced
fully_busy nr_idle nr_idle N/A N/A balanced balanced
misfit_task force N/A N/A N/A *N/A* *N/A*
asym_packing force force N/A N/A force force
imbalanced force force N/A N/A force force
overloaded force force N/A N/A force avg_load
Fixes: 0b0695f2b3 ("sched/fair: Rework load_balance()")
Signed-off-by: Tao Zhou <tao.zhou@linux.dev>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20220415095505.7765-1-tao.zhou@linux.dev
Martin find it confusing when look at the /proc/pressure/cpu output,
and found no hint about that CPU "full" line in psi Documentation.
% cat /proc/pressure/cpu
some avg10=0.92 avg60=0.91 avg300=0.73 total=933490489
full avg10=0.22 avg60=0.23 avg300=0.16 total=358783277
The PSI_CPU_FULL state is introduced by commit e7fcd76228
("psi: Add PSI_CPU_FULL state"), which mainly for cgroup level,
but also counted at the system level as a side effect.
Naturally, the FULL state doesn't exist for the CPU resource at
the system level. These "full" numbers can come from CPU idle
schedule latency. For example, t1 is the time when task wakeup
on an idle CPU, t2 is the time when CPU pick and switch to it.
The delta of (t2 - t1) will be in CPU_FULL state.
Another case all processes can be stalled is when all cgroups
have been throttled at the same time, which unlikely to happen.
Anyway, CPU_FULL metric is meaningless and confusing at the
system level. So this patch will report zeroes for CPU full
at the system level, and update psi Documentation accordingly.
Fixes: e7fcd76228 ("psi: Add PSI_CPU_FULL state")
Reported-by: Martin Steigerwald <Martin.Steigerwald@proact.de>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20220408121914.82855-1-zhouchengming@bytedance.com
