commit 10c5357874 upstream.
Currently rcu_preempt_deferred_qs_irqrestore() releases rnp->boost_mtx
before reporting the expedited quiescent state. Under heavy real-time
load, this can result in this function being preempted before the
quiescent state is reported, which can in turn prevent the expedited grace
period from completing. Tim Murray reports that the resulting expedited
grace periods can take hundreds of milliseconds and even more than one
second, when they should normally complete in less than a millisecond.
This was fine given that there were no particular response-time
constraints for synchronize_rcu_expedited(), as it was designed
for throughput rather than latency. However, some users now need
sub-100-millisecond response-time constratints.
This patch therefore follows Neeraj's suggestion (seconded by Tim and
by Uladzislau Rezki) of simply reversing the two operations.
Reported-by: Tim Murray <timmurray@google.com>
Reported-by: Joel Fernandes <joelaf@google.com>
Reported-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Tested-by: Tim Murray <timmurray@google.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: <stable@vger.kernel.org> # 5.4.x
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b2fcf21020 upstream.
This sequence of events can lead to a failure to requeue a CPU's
->nocb_timer:
1. There are no callbacks queued for any CPU covered by CPU 0-2's
->nocb_gp_kthread. Note that ->nocb_gp_kthread is associated
with CPU 0.
2. CPU 1 enqueues its first callback with interrupts disabled, and
thus must defer awakening its ->nocb_gp_kthread. It therefore
queues its rcu_data structure's ->nocb_timer. At this point,
CPU 1's rdp->nocb_defer_wakeup is RCU_NOCB_WAKE.
3. CPU 2, which shares the same ->nocb_gp_kthread, also enqueues a
callback, but with interrupts enabled, allowing it to directly
awaken the ->nocb_gp_kthread.
4. The newly awakened ->nocb_gp_kthread associates both CPU 1's
and CPU 2's callbacks with a future grace period and arranges
for that grace period to be started.
5. This ->nocb_gp_kthread goes to sleep waiting for the end of this
future grace period.
6. This grace period elapses before the CPU 1's timer fires.
This is normally improbably given that the timer is set for only
one jiffy, but timers can be delayed. Besides, it is possible
that kernel was built with CONFIG_RCU_STRICT_GRACE_PERIOD=y.
7. The grace period ends, so rcu_gp_kthread awakens the
->nocb_gp_kthread, which in turn awakens both CPU 1's and
CPU 2's ->nocb_cb_kthread. Then ->nocb_gb_kthread sleeps
waiting for more newly queued callbacks.
8. CPU 1's ->nocb_cb_kthread invokes its callback, then sleeps
waiting for more invocable callbacks.
9. Note that neither kthread updated any ->nocb_timer state,
so CPU 1's ->nocb_defer_wakeup is still set to RCU_NOCB_WAKE.
10. CPU 1 enqueues its second callback, this time with interrupts
enabled so it can wake directly ->nocb_gp_kthread.
It does so with calling wake_nocb_gp() which also cancels the
pending timer that got queued in step 2. But that doesn't reset
CPU 1's ->nocb_defer_wakeup which is still set to RCU_NOCB_WAKE.
So CPU 1's ->nocb_defer_wakeup and its ->nocb_timer are now
desynchronized.
11. ->nocb_gp_kthread associates the callback queued in 10 with a new
grace period, arranges for that grace period to start and sleeps
waiting for it to complete.
12. The grace period ends, rcu_gp_kthread awakens ->nocb_gp_kthread,
which in turn wakes up CPU 1's ->nocb_cb_kthread which then
invokes the callback queued in 10.
13. CPU 1 enqueues its third callback, this time with interrupts
disabled so it must queue a timer for a deferred wakeup. However
the value of its ->nocb_defer_wakeup is RCU_NOCB_WAKE which
incorrectly indicates that a timer is already queued. Instead,
CPU 1's ->nocb_timer was cancelled in 10. CPU 1 therefore fails
to queue the ->nocb_timer.
14. CPU 1 has its pending callback and it may go unnoticed until
some other CPU ever wakes up ->nocb_gp_kthread or CPU 1 ever
calls an explicit deferred wakeup, for example, during idle entry.
This commit fixes this bug by resetting rdp->nocb_defer_wakeup everytime
we delete the ->nocb_timer.
It is quite possible that there is a similar scenario involving
->nocb_bypass_timer and ->nocb_defer_wakeup. However, despite some
effort from several people, a failure scenario has not yet been located.
However, that by no means guarantees that no such scenario exists.
Finding a failure scenario is left as an exercise for the reader, and the
"Fixes:" tag below relates to ->nocb_bypass_timer instead of ->nocb_timer.
Fixes: d1b222c6be (rcu/nocb: Add bypass callback queueing)
Cc: <stable@vger.kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bfb3aa735f upstream.
An outgoing CPU is marked offline in a stop-machine handler and most
of that CPU's services stop at that point, including IRQ work queues.
However, that CPU must take another pass through the scheduler and through
a number of CPU-hotplug notifiers, many of which contain RCU readers.
In the past, these readers were not a problem because the outgoing CPU
has interrupts disabled, so that rcu_read_unlock_special() would not
be invoked, and thus RCU would never attempt to queue IRQ work on the
outgoing CPU.
This changed with the advent of the CONFIG_RCU_STRICT_GRACE_PERIOD
Kconfig option, in which rcu_read_unlock_special() is invoked upon exit
from almost all RCU read-side critical sections. Worse yet, because
interrupts are disabled, rcu_read_unlock_special() cannot immediately
report a quiescent state and will therefore attempt to defer this
reporting, for example, by queueing IRQ work. Which fails with a splat
because the CPU is already marked as being offline.
But it turns out that there is no need to report this quiescent state
because rcu_report_dead() will do this job shortly after the outgoing
CPU makes its final dive into the idle loop. This commit therefore
makes rcu_read_unlock_special() refrain from queuing IRQ work onto
outgoing CPUs.
Fixes: 44bad5b3cc ("rcu: Do full report for .need_qs for strict GPs")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7663ad9a5d ]
RCU managed to grow a few noinstr violations:
vmlinux.o: warning: objtool: rcu_dynticks_eqs_enter()+0x0: call to rcu_dynticks_task_trace_enter() leaves .noinstr.text section
vmlinux.o: warning: objtool: rcu_dynticks_eqs_exit()+0xe: call to rcu_dynticks_task_trace_exit() leaves .noinstr.text section
Fix them by adding __always_inline to the relevant trivial functions.
Also replace the noinstr with __always_inline for the existing
rcu_dynticks_task_*() functions since noinstr would force noinline
them, even when empty, which seems silly.
Fixes: 7d0c9c50c5 ("rcu-tasks: Avoid IPIing userspace/idle tasks if kernel is so built")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fed31a4dd3 ]
This commit fixes several typos where CONFIG_TASKS_RCU_TRACE should
instead be CONFIG_TASKS_TRACE_RCU. Among other things, these typos
could cause CONFIG_TASKS_TRACE_RCU_READ_MB=y kernels to suffer from
memory-ordering bugs that could result in false-positive quiescent
states and too-short grace periods.
Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a649d25dcc ]
This commit adds a number of lockdep_assert_irqs_disabled() calls
to rcu_sched_clock_irq() and a number of the functions that it calls.
The point of this is to help track down a situation where lockdep appears
to be insisting that interrupts are enabled within these functions, which
should only ever be invoked from the scheduling-clock interrupt handler.
Link: https://lore.kernel.org/lkml/20201111133813.GA81547@elver.google.com/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 43789ef3f7 upstream.
Entering RCU idle mode may cause a deferred wake up of an RCU NOCB_GP
kthread (rcuog) to be serviced.
Usually a local wake up happening while running the idle task is handled
in one of the need_resched() checks carefully placed within the idle
loop that can break to the scheduler.
Unfortunately the call to rcu_idle_enter() is already beyond the last
generic need_resched() check and we may halt the CPU with a resched
request unhandled, leaving the task hanging.
Fix this with splitting the rcuog wakeup handling from rcu_idle_enter()
and place it before the last generic need_resched() check in the idle
loop. It is then assumed that no call to call_rcu() will be performed
after that in the idle loop until the CPU is put in low power mode.
Fixes: 96d3fd0d31 (rcu: Break call_rcu() deadlock involving scheduler and perf)
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20210131230548.32970-3-frederic@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "cpu" parameter to rcu_report_qs_rdp() is not used, with rdp->cpu
being used instead. Furtheremore, every call to rcu_report_qs_rdp()
invokes it on rdp->cpu. This commit therefore removes this unused "cpu"
parameter and converts a check of rdp->cpu against smp_processor_id()
to a WARN_ON_ONCE().
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The CONFIG_PREEMPT=n instance of rcu_read_unlock is even more
aggressively than that of CONFIG_PREEMPT=y in deferring reporting
quiescent states to the RCU core. This is just what is wanted in normal
use because it reduces overhead, but the resulting delay is not what
is wanted for kernels built with CONFIG_RCU_STRICT_GRACE_PERIOD=y.
This commit therefore adds an rcu_read_unlock_strict() function that
checks for exceptional conditions, and reports the newly started
quiescent state if it is safe to do so, also doing a spin-delay if
requested via rcutree.rcu_unlock_delay. This commit also adds a call
to rcu_read_unlock_strict() from the CONFIG_PREEMPT=n instance of
__rcu_read_unlock().
[ paulmck: Fixed bug located by kernel test robot <lkp@intel.com> ]
Reported-by Jann Horn <jannh@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The goal of this series is to increase the probability of tools like
KASAN detecting that an RCU-protected pointer was used outside of its
RCU read-side critical section. Thus far, the approach has been to make
grace periods and callback processing happen faster. Another approach
is to delay the pointer leaker. This commit therefore allows a delay
to be applied to exit from RCU read-side critical sections.
This slowdown is specified by a new rcutree.rcu_unlock_delay kernel boot
parameter that specifies this delay in microseconds, defaulting to zero.
Reported-by Jann Horn <jannh@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_preempt_deferred_qs_irqrestore() function is invoked at
the end of an RCU read-side critical section (for example, directly
from rcu_read_unlock()) and, if .need_qs is set, invokes rcu_qs() to
report the new quiescent state. This works, except that rcu_qs() only
updates per-CPU state, leaving reporting of the actual quiescent state
to a later call to rcu_report_qs_rdp(), for example from within a later
RCU_SOFTIRQ instance. Although this approach is exactly what you want if
you are more concerned about efficiency than about short grace periods,
in CONFIG_RCU_STRICT_GRACE_PERIOD=y kernels, short grace periods are
the name of the game.
This commit therefore makes rcu_preempt_deferred_qs_irqrestore() directly
invoke rcu_report_qs_rdp() in CONFIG_RCU_STRICT_GRACE_PERIOD=y, thus
shortening grace periods.
Historical note: To the best of my knowledge, causing rcu_read_unlock()
to directly report a quiescent state first appeared in Jim Houston's
and Joe Korty's JRCU. This is the second instance of a Linux-kernel RCU
feature being inspired by JRCU, the first being RCU callback offloading
(as in the RCU_NOCB_CPU Kconfig option).
Reported-by Jann Horn <jannh@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The ->rcu_read_unlock_special.b.need_qs field in the task_struct
structure indicates that the RCU core needs a quiscent state from the
corresponding task. The __rcu_read_unlock() function checks this (via
an eventual call to rcu_preempt_deferred_qs_irqrestore()), and if set
reports a quiscent state immediately upon exit from the outermost RCU
read-side critical section.
Currently, this flag is only set when the scheduling-clock interrupt
decides that the current RCU grace period is too old, as in about
one full second too old. But if the kernel has been built with
CONFIG_RCU_STRICT_GRACE_PERIOD=y, we clearly do not want to wait that
long. This commit therefore sets the .need_qs field immediately at the
start of the RCU read-side critical section from within __rcu_read_lock()
in order to unconditionally enlist help from __rcu_read_unlock().
But note the additional check for rcu_state.gp_kthread, which prevents
attempts to awaken RCU's grace-period kthread during early boot before
there is a scheduler. Leaving off this check results in early boot hangs.
So early that there is no console output. Thus, this additional check
fails until such time as RCU's grace-period kthread has been created,
avoiding these empty-console hangs.
Reported-by Jann Horn <jannh@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
People running automated tests have asked for a way to make RCU minimize
grace-period duration in order to increase the probability of KASAN
detecting a pointer being improperly leaked from an RCU read-side critical
section, for example, like this:
rcu_read_lock();
p = rcu_dereference(gp);
do_something_with(p); // OK
rcu_read_unlock();
do_something_else_with(p); // BUG!!!
The rcupdate.rcu_expedited boot parameter is a start in this direction,
given that it makes calls to synchronize_rcu() instead invoke the faster
(and more wasteful) synchronize_rcu_expedited(). However, this does
nothing to shorten RCU grace periods that are instead initiated by
call_rcu(), and RCU pointer-leak bugs can involve call_rcu() just as
surely as they can synchronize_rcu().
This commit therefore adds a RCU_STRICT_GRACE_PERIOD Kconfig option
that will be used to shorten normal (non-expedited) RCU grace periods.
This commit also dumps out a message when this option is in effect.
Later commits will actually shorten grace periods.
Reported-by Jann Horn <jannh@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit increases RCU's ability to defend itself by emitting a warning
if one of the nocb CB kthreads invokes the GP kthread's wait function.
This warning augments a similar check that is carried out at the end
of rcutorture testing and when RCU CPU stall warnings are emitted.
The problem with those checks is that the miscreants have long since
departed and disposed of any and all evidence.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_data structure's ->nocb_timer field is used to defer wakeups of
the corresponding no-CBs CPU's grace-period kthread ("rcuog*"), and that
structure's ->nocb_defer_wakeup field is used to track such deferral.
This means that the show_rcu_nocb_state() printing an error when those
fields are set for a CPU not corresponding to a no-CBs grace-period
kthread is erroneous.
This commit therefore switches the check from ->nocb_timer to
->nocb_bypass_timer and removes the check of ->nocb_defer_wakeup.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
A message of the form "rcu: !!! lDTs ." can be tracked down, but
doing so is not trivial. This commit therefore eases this process by
adding text so that this error message now reads as follows:
"rcu: nocb GP activity on CB-only CPU!!! lDTs ."
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit converts the schedule_timeout_interruptible() call used by
RCU's no-CBs grace-period kthreads to schedule_timeout_idle(). This
conversion avoids polluting the load-average with RCU-related sleeping.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit converts the long-standing schedule_timeout_interruptible()
call used by RCU's priority-boosting kthreads to schedule_timeout_idle().
This conversion avoids polluting the load-average with RCU-related
sleeping.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
fixes.2020.04.27a: Miscellaneous fixes.
kfree_rcu.2020.04.27a: Changes related to kfree_rcu().
rcu-tasks.2020.04.27a: Addition of new RCU-tasks flavors.
stall.2020.04.27a: RCU CPU stall-warning updates.
torture.2020.05.07a: Torture-test updates.
Systems running CPU-bound real-time task do not want IPIs sent to CPUs
executing nohz_full userspace tasks. Battery-powered systems don't
want IPIs sent to idle CPUs in low-power mode. Unfortunately, RCU tasks
trace can and will send such IPIs in some cases.
Both of these situations occur only when the target CPU is in RCU
dyntick-idle mode, in other words, when RCU is not watching the
target CPU. This suggests that CPUs in dyntick-idle mode should use
memory barriers in outermost invocations of rcu_read_lock_trace()
and rcu_read_unlock_trace(), which would allow the RCU tasks trace
grace period to directly read out the target CPU's read-side state.
One challenge is that RCU tasks trace is not targeting a specific
CPU, but rather a task. And that task could switch from one CPU to
another at any time.
This commit therefore uses try_invoke_on_locked_down_task()
and checks for task_curr() in trc_inspect_reader_notrunning().
When this condition holds, the target task is running and cannot move.
If CONFIG_TASKS_TRACE_RCU_READ_MB=y, the new rcu_dynticks_zero_in_eqs()
function can be used to check if the specified integer (in this case,
t->trc_reader_nesting) is zero while the target CPU remains in that same
dyntick-idle sojourn. If so, the target task is in a quiescent state.
If not, trc_read_check_handler() must indicate failure so that the
grace-period kthread can take appropriate action or retry after an
appropriate delay, as the case may be.
With this change, given CONFIG_TASKS_TRACE_RCU_READ_MB=y, if a given
CPU remains idle or a given task continues executing in nohz_full mode,
the RCU tasks trace grace-period kthread will detect this without the
need to send an IPI.
Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit makes the calls to rcu_tasks_qs() detect and report
quiescent states for RCU tasks trace. If the task is in a quiescent
state and if ->trc_reader_checked is not yet set, the task sets its own
->trc_reader_checked. This will cause the grace-period kthread to
remove it from the holdout list if it still remains there.
[ paulmck: Fix conditional compilation per kbuild test robot feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, the PREEMPT=y version of rcu_note_context_switch() does not
invoke rcu_tasks_qs(), and we need it to in order to keep RCU Tasks
Trace's IPIs down to a dull roar. This commit therefore enables this
hook.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Now that RCU flavors have been consolidated, an RCU-preempt
rcu_read_unlock() in an interrupt or softirq handler cannot possibly
end the RCU read-side critical section. Consider the old vulnerability
involving rcu_read_unlock() being invoked within such a handler that
interrupted an __rcu_read_unlock_special(), in which a wakeup might be
invoked with a scheduler lock held. Because rcu_read_unlock_special()
no longer does wakeups in such situations, it is no longer necessary
for __rcu_read_unlock() to set the nesting level negative.
This commit therefore removes this recursion-protection code from
__rcu_read_unlock().
[ paulmck: Let rcu_exp_handler() continue to call rcu_report_exp_rdp(). ]
[ paulmck: Adjust other checks given no more negative nesting. ]
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
