Most of the dma_direct symbols should only be used by direct.c and
mapping.c, so move them to kernel/dma. In fact more of dma-direct.h
should eventually move, but that will require more coordination with
other subsystems.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Most of dma-debug.h is not required by anything outside of kernel/dma.
Move the four declarations needed by dma-mappin.h or dma-ops providers
into dma-mapping.h and dma-map-ops.h, and move the remainder of the
file to kernel/dma/debug.h.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Split out all the bits that are purely for dma_map_ops implementations
and related code into a new <linux/dma-map-ops.h> header so that they
don't get pulled into all the drivers. That also means the architecture
specific <asm/dma-mapping.h> is not pulled in by <linux/dma-mapping.h>
any more, which leads to a missing includes that were pulled in by the
x86 or arm versions in a few not overly portable drivers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
This API is the equivalent of alloc_pages, except that the returned memory
is guaranteed to be DMA addressable by the passed in device. The
implementation will also be used to provide a more sensible replacement
for DMA_ATTR_NON_CONSISTENT flag.
Additionally dma_alloc_noncoherent is switched over to use dma_alloc_pages
as its backend.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> (MIPS part)
All users are gone now, remove the API.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> (MIPS part)
When booting the kernel v5.9-rc4 on a VM, the kernel would panic when
printing a warning message in swiotlb_map(). The dev->dma_mask must not
be a NULL pointer when calling the dma mapping layer. A NULL pointer
check can potentially avoid the panic.
Signed-off-by: Thomas Tai <thomas.tai@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add a new file that contains helpers for misc DMA ops, which is only
built when CONFIG_DMA_OPS is set.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Several IOMMU drivers have a bypass mode where they can use a direct
mapping if the devices DMA mask is large enough. Add generic support
to the core dma-mapping code to do that to switch those drivers to
a common solution.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
For a long time the DMA API has been implemented inline in dma-mapping.h,
but the function bodies can be quite large. Move them all out of line.
This also removes all the dma_direct_* exports as those are just
implementation details and should never be used by drivers directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
When dma_mmap_coherent() sets up a mapping to unencrypted coherent memory
under SEV encryption and sometimes under SME encryption, it will actually
set up an encrypted mapping rather than an unencrypted, causing devices
that DMAs from that memory to read encrypted contents. Fix this.
When force_dma_unencrypted() returns true, the linear kernel map of the
coherent pages have had the encryption bit explicitly cleared and the
page content is unencrypted. Make sure that any additional PTEs we set
up to these pages also have the encryption bit cleared by having
dma_pgprot() return a protection with the encryption bit cleared in this
case.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lkml.kernel.org/r/20200304114527.3636-3-thomas_os@shipmail.org
For dma-direct we know that the DMA address is an encoding of the
physical address that we can trivially decode. Use that fact to
provide implementations that do not need the arch_dma_coherent_to_pfn
architecture hook. Note that we still can only support mmap of
non-coherent memory only if the architecture provides a way to set an
uncached bit in the page tables. This must be true for architectures
that use the generic remap helpers, but other architectures can also
manually select it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Pull powerpc updates from Michael Ellerman:
"This is a bit late, partly due to me travelling, and partly due to a
power outage knocking out some of my test systems *while* I was
travelling.
- Initial support for running on a system with an Ultravisor, which
is software that runs below the hypervisor and protects guests
against some attacks by the hypervisor.
- Support for building the kernel to run as a "Secure Virtual
Machine", ie. as a guest capable of running on a system with an
Ultravisor.
- Some changes to our DMA code on bare metal, to allow devices with
medium sized DMA masks (> 32 && < 59 bits) to use more than 2GB of
DMA space.
- Support for firmware assisted crash dumps on bare metal (powernv).
- Two series fixing bugs in and refactoring our PCI EEH code.
- A large series refactoring our exception entry code to use gas
macros, both to make it more readable and also enable some future
optimisations.
As well as many cleanups and other minor features & fixups.
Thanks to: Adam Zerella, Alexey Kardashevskiy, Alistair Popple, Andrew
Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Anshuman Khandual,
Balbir Singh, Benjamin Herrenschmidt, Cédric Le Goater, Christophe
JAILLET, Christophe Leroy, Christopher M. Riedl, Christoph Hellwig,
Claudio Carvalho, Daniel Axtens, David Gibson, David Hildenbrand,
Desnes A. Nunes do Rosario, Ganesh Goudar, Gautham R. Shenoy, Greg
Kurz, Guerney Hunt, Gustavo Romero, Halil Pasic, Hari Bathini, Joakim
Tjernlund, Jonathan Neuschafer, Jordan Niethe, Leonardo Bras, Lianbo
Jiang, Madhavan Srinivasan, Mahesh Salgaonkar, Mahesh Salgaonkar,
Masahiro Yamada, Maxiwell S. Garcia, Michael Anderson, Nathan
Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Oliver
O'Halloran, Qian Cai, Ram Pai, Ravi Bangoria, Reza Arbab, Ryan Grimm,
Sam Bobroff, Santosh Sivaraj, Segher Boessenkool, Sukadev Bhattiprolu,
Thiago Bauermann, Thiago Jung Bauermann, Thomas Gleixner, Tom
Lendacky, Vasant Hegde"
* tag 'powerpc-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (264 commits)
powerpc/mm/mce: Keep irqs disabled during lockless page table walk
powerpc: Use ftrace_graph_ret_addr() when unwinding
powerpc/ftrace: Enable HAVE_FUNCTION_GRAPH_RET_ADDR_PTR
ftrace: Look up the address of return_to_handler() using helpers
powerpc: dump kernel log before carrying out fadump or kdump
docs: powerpc: Add missing documentation reference
powerpc/xmon: Fix output of XIVE IPI
powerpc/xmon: Improve output of XIVE interrupts
powerpc/mm/radix: remove useless kernel messages
powerpc/fadump: support holes in kernel boot memory area
powerpc/fadump: remove RMA_START and RMA_END macros
powerpc/fadump: update documentation about option to release opalcore
powerpc/fadump: consider f/w load area
powerpc/opalcore: provide an option to invalidate /sys/firmware/opal/core file
powerpc/opalcore: export /sys/firmware/opal/core for analysing opal crashes
powerpc/fadump: update documentation about CONFIG_PRESERVE_FA_DUMP
powerpc/fadump: add support to preserve crash data on FADUMP disabled kernel
powerpc/fadump: improve how crashed kernel's memory is reserved
powerpc/fadump: consider reserved ranges while releasing memory
powerpc/fadump: make crash memory ranges array allocation generic
...
Most dma_map_ops instances are IOMMUs that work perfectly fine in 32-bits
of IOVA space, and the generic direct mapping code already provides its
own routines that is intelligent based on the amount of memory actually
present. Wire up the dma-direct routine for the ARM direct mapping code
as well, and otherwise default to the constant 32-bit mask. This way
we only need to override it for the occasional odd IOMMU that requires
64-bit IOVA support, or IOMMU drivers that are more efficient if they
can fall back to the direct mapping.
Signed-off-by: Christoph Hellwig <hch@lst.de>
CONFIG_ARCH_NO_COHERENT_DMA_MMAP is now functionally identical to
!CONFIG_MMU, so remove the separate symbol. The only difference is that
arm did not set it for !CONFIG_MMU, but arm uses a separate dma mapping
implementation including its own mmap method, which is handled by moving
the CONFIG_MMU check in dma_can_mmap so that is only applies to the
dma-direct case, just as the other ifdefs for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Add a helper to check if DMA allocations for a specific device can be
mapped to userspace using dma_mmap_*.
Signed-off-by: Christoph Hellwig <hch@lst.de>
While the default ->mmap and ->get_sgtable implementations work for the
majority of our dma_map_ops impementations they are inherently safe
for others that don't use the page allocator or CMA and/or use their
own way of remapping not covered by the common code. So remove the
defaults if these methods are not wired up, but instead wire up the
default implementations for all safe instances.
Fixes: e1c7e32453 ("dma-mapping: always provide the dma_map_ops based implementation")
Signed-off-by: Christoph Hellwig <hch@lst.de>
This patch adds a new DMA API "dma_get_merge_boundary". This function
returns the DMA merge boundary if the DMA layer can merge the segments.
This patch also adds the implementation for a new dma_map_ops pointer.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Christoph Hellwig <hch@lst.de>
arch_dma_mmap_pgprot is used for two things:
1) to override the "normal" uncached page attributes for mapping
memory coherent to devices that can't snoop the CPU caches
2) to provide the special DMA_ATTR_WRITE_COMBINE semantics on older
arm systems and some mips platforms
Replace one with the pgprot_dmacoherent macro that is already provided
by arm and much simpler to use, and lift the DMA_ATTR_WRITE_COMBINE
handling to common code with an explicit arch opt-in.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Acked-by: Paul Burton <paul.burton@mips.com> # mips
All the way back to introducing dma_common_mmap we've defaulted to mark
the pages as uncached. But this is wrong for DMA coherent devices.
Later on DMA_ATTR_WRITE_COMBINE also got incorrect treatment as that
flag is only treated special on the alloc side for non-coherent devices.
Introduce a new dma_pgprot helper that deals with the check for coherent
devices so that only the remapping cases ever reach arch_dma_mmap_pgprot
and we thus ensure no aliasing of page attributes happens, which makes
the powerpc version of arch_dma_mmap_pgprot obsolete and simplifies the
remaining ones.
Note that this means arch_dma_mmap_pgprot is a bit misnamed now, but
we'll phase it out soon.
Fixes: 64ccc9c033 ("common: dma-mapping: add support for generic dma_mmap_* calls")
Reported-by: Shawn Anastasio <shawn@anastas.io>
Reported-by: Gavin Li <git@thegavinli.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com> # arm64
sme_active() is an x86-specific function so it's better not to call it from
generic code. Christoph Hellwig mentioned that "There is no reason why we
should have a special debug printk just for one specific reason why there
is a requirement for a large DMA mask.", so just remove dma_check_mask().
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190806044919.10622-4-bauerman@linux.ibm.com
Check that the pfn returned from arch_dma_coherent_to_pfn refers to
a valid page and reject the mmap / get_sgtable requests otherwise.
Based on the arm implementation of the mmap and get_sgtable methods.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Vignesh Raghavendra <vigneshr@ti.com>
The dma masks in struct device are always 64-bits wide. But for builds
using a 32-bit dma_addr_t we need to ensure we don't store an
unsupportable value. Before Linux 5.0 this was handled at least by
the ARM dma mapping code by never allowing to set a larger dma_mask,
but these days we allow the driver to just set the largest supported
value and never fall back to a smaller one. Ensure this always works
by truncating the value.
Fixes: 9eb9e96e97 ("Documentation/DMA-API-HOWTO: update dma_mask sections")
Signed-off-by: Christoph Hellwig <hch@lst.de>
