[ Upstream commit 4f01d09b2b ]
When the sm712fb driver writes three bytes to the framebuffer, the
driver will crash:
BUG: unable to handle page fault for address: ffffc90001ffffff
RIP: 0010:smtcfb_write+0x454/0x5b0
Call Trace:
vfs_write+0x291/0xd60
? do_sys_openat2+0x27d/0x350
? __fget_light+0x54/0x340
ksys_write+0xce/0x190
do_syscall_64+0x43/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fix it by removing the open-coded endianness fixup-code.
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24565bc411 ]
coccinelle report:
./drivers/video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c:
479:9-17: WARNING: use scnprintf or sprintf
Use sysfs_emit instead of scnprintf or sprintf makes more sense.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Yang Guang <yang.guang5@zte.com.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5c6f402bdc ]
Do a sanity check on pixclock value to avoid divide by zero.
If the pixclock value is zero, the cirrusfb driver will round up
pixclock to get the derived frequency as close to maxclock as
possible.
Syzkaller reported a divide error in cirrusfb_check_pixclock.
divide error: 0000 [#1] SMP KASAN PTI
CPU: 0 PID: 14938 Comm: cirrusfb_test Not tainted 5.15.0-rc6 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2
RIP: 0010:cirrusfb_check_var+0x6f1/0x1260
Call Trace:
fb_set_var+0x398/0xf90
do_fb_ioctl+0x4b8/0x6f0
fb_ioctl+0xeb/0x130
__x64_sys_ioctl+0x19d/0x220
do_syscall_64+0x3a/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8738ddcac6 ]
w100fb_probe() did not reset the global state to its initial state. This
can result in invocation of iounmap() even when there was not the
appropriate successful call of ioremap(). For instance, this may be the
case if first probe fails after two successful ioremap() while second
probe fails when first ioremap() fails. The similar issue is with
w100fb_remove(). The patch fixes both bugs.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Co-developed-by: Kirill Shilimanov <kirill.shilimanov@huawei.com>
Signed-off-by: Kirill Shilimanov <kirill.shilimanov@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 37a1a2e6ee ]
Coverity complains of a possible buffer overflow. However,
given the 'static' scope of nvidia_setup_i2c_bus() it looks
like that can't happen after examiniing the call sites.
CID 19036 (#1 of 1): Copy into fixed size buffer (STRING_OVERFLOW)
1. fixed_size_dest: You might overrun the 48-character fixed-size string
chan->adapter.name by copying name without checking the length.
2. parameter_as_source: Note: This defect has an elevated risk because the
source argument is a parameter of the current function.
89 strcpy(chan->adapter.name, name);
Fix this warning by using strscpy() which will silence the warning and
prevent any future buffer overflows should the names used to identify the
channel become much longer.
Cc: Antonino Daplas <adaplas@gmail.com>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a58c22cfbb ]
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes: f76ee892a9 ("omapfb: copy omapdss & displays for omapfb")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 78482af095 ]
This code has two bugs:
1) "cnt" is 255 but the size of the buffer is 256 so the last byte is
not used.
2) If we try to print more than 255 characters then "cnt" will be
negative and that will trigger a WARN() in snprintf(). The fix for
this is to use scnprintf() instead of snprintf().
We can re-write this code to be cleaner:
1) Rename "offset" to "off" because that's shorter.
2) Get rid of the "cnt" variable and just use "size - off" directly.
3) Get rid of the "read" variable and just increment "off" directly.
Fixes: 96fe6a2109 ("fbdev: Add VESA Coordinated Video Timings (CVT) support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1791f487f8 ]
I got a null-ptr-deref report:
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
RIP: 0010:fb_destroy_modelist+0x38/0x100
...
Call Trace:
ufx_usb_probe.cold+0x2b5/0xac1 [smscufx]
usb_probe_interface+0x1aa/0x3c0 [usbcore]
really_probe+0x167/0x460
...
ret_from_fork+0x1f/0x30
If fb_alloc_cmap() fails in ufx_usb_probe(), fb_destroy_modelist() will
be called to destroy modelist in the error handling path. But modelist
has not been initialized yet, so it will result in null-ptr-deref.
Initialize modelist before calling fb_alloc_cmap() to fix this bug.
Fixes: 3c8a63e22a ("Add support for SMSC UFX6000/7000 USB display adapters")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 567e44fb51 ]
If PPC_BOOK3S, PPC_PMAC and PPC32 is n, COMPILE_TEST build fails:
drivers/video/fbdev/controlfb.c:70:0: error: "pgprot_cached_wthru" redefined [-Werror]
#define pgprot_cached_wthru(prot) (prot)
In file included from ./arch/powerpc/include/asm/pgtable.h:20:0,
from ./include/linux/pgtable.h:6,
from ./include/linux/mm.h:33,
from drivers/video/fbdev/controlfb.c:37:
./arch/powerpc/include/asm/nohash/pgtable.h:243:0: note: this is the location of the previous definition
#define pgprot_cached_wthru(prot) (__pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | \
Fixes: a07a63b0e2 ("video: fbdev: controlfb: add COMPILE_TEST support")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62d89a7d49 ]
Start from commit 11be60bd66 "matroxfb: add Matrox MGA-G200eW board
support", when maxvram is 0x800000, monitor become black w/ error message
said: "The current input timing is not supported by the monitor display.
Please change your input timing to 1920x1080@60Hz ...".
Fixes: 11be60bd66 ("matroxfb: add Matrox MGA-G200eW board support")
Signed-off-by: Z. Liu <liuzx@knownsec.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit bd771cf5c4 upstream.
Zheyu Ma reported this crash in the sm712fb driver when reading
three bytes from the framebuffer:
BUG: unable to handle page fault for address: ffffc90001ffffff
RIP: 0010:smtcfb_read+0x230/0x3e0
Call Trace:
vfs_read+0x198/0xa00
? do_sys_openat2+0x27d/0x350
? __fget_light+0x54/0x340
ksys_read+0xce/0x190
do_syscall_64+0x43/0x90
Fix it by removing the open-coded endianess fixup-code and
by moving the pointer post decrement out the fb_readl() function.
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Tested-by: Zheyu Ma <zheyuma97@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a3f781a9d6 upstream.
Add a config option CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION to
enable bitblt and fillrect hardware acceleration in the framebuffer
console. If disabled, such acceleration will not be used, even if it is
supported by the graphics hardware driver.
If you plan to use DRM as your main graphics output system, you should
disable this option since it will prevent compiling in code which isn't
used later on when DRM takes over.
For all other configurations, e.g. if none of your graphic cards support
DRM (yet), DRM isn't available for your architecture, or you can't be
sure that the graphic card in the target system will support DRM, you
most likely want to enable this option.
In the non-accelerated case (e.g. when DRM is used), the inlined
fb_scrollmode() function is hardcoded to return SCROLL_REDRAW and as such the
compiler is able to optimize much unneccesary code away.
In this v3 patch version I additionally changed the GETVYRES() and GETVXRES()
macros to take a pointer to the fbcon_display struct. This fixes the build when
console rotation is enabled and helps the compiler again to optimize out code.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220202135531.92183-4-deller@gmx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 87ab9f6b74 upstream.
This reverts commit 39aead8373.
Revert the first (of 2) commits which disabled scrolling acceleration in
fbcon/fbdev. It introduced a regression for fbdev-supported graphic cards
because of the performance penalty by doing screen scrolling by software
instead of using the existing graphic card 2D hardware acceleration.
Console scrolling acceleration was disabled by dropping code which
checked at runtime the driver hardware capabilities for the
BINFO_HWACCEL_COPYAREA or FBINFO_HWACCEL_FILLRECT flags and if set, it
enabled scrollmode SCROLL_MOVE which uses hardware acceleration to move
screen contents. After dropping those checks scrollmode was hard-wired
to SCROLL_REDRAW instead, which forces all graphic cards to redraw every
character at the new screen position when scrolling.
This change effectively disabled all hardware-based scrolling acceleration for
ALL drivers, because now all kind of 2D hardware acceleration (bitblt,
fillrect) in the drivers isn't used any longer.
The original commit message mentions that only 3 DRM drivers (nouveau, omapdrm
and gma500) used hardware acceleration in the past and thus code for checking
and using scrolling acceleration is obsolete.
This statement is NOT TRUE, because beside the DRM drivers there are around 35
other fbdev drivers which depend on fbdev/fbcon and still provide hardware
acceleration for fbdev/fbcon.
The original commit message also states that syzbot found lots of bugs in fbcon
and thus it's "often the solution to just delete code and remove features".
This is true, and the bugs - which actually affected all users of fbcon,
including DRM - were fixed, or code was dropped like e.g. the support for
software scrollback in vgacon (commit 973c096f6a).
So to further analyze which bugs were found by syzbot, I've looked through all
patches in drivers/video which were tagged with syzbot or syzkaller back to
year 2005. The vast majority fixed the reported issues on a higher level, e.g.
when screen is to be resized, or when font size is to be changed. The few ones
which touched driver code fixed a real driver bug, e.g. by adding a check.
But NONE of those patches touched code of either the SCROLL_MOVE or the
SCROLL_REDRAW case.
That means, there was no real reason why SCROLL_MOVE had to be ripped-out and
just SCROLL_REDRAW had to be used instead. The only reason I can imagine so far
was that SCROLL_MOVE wasn't used by DRM and as such it was assumed that it
could go away. That argument completely missed the fact that SCROLL_MOVE is
still heavily used by fbdev (non-DRM) drivers.
Some people mention that using memcpy() instead of the hardware acceleration is
pretty much the same speed. But that's not true, at least not for older graphic
cards and machines where we see speed decreases by factor 10 and more and thus
this change leads to console responsiveness way worse than before.
That's why the original commit is to be reverted. By reverting we
reintroduce hardware-based scrolling acceleration and fix the
performance regression for fbdev drivers.
There isn't any impact on DRM when reverting those patches.
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Sven Schnelle <svens@stackframe.org>
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220202135531.92183-3-deller@gmx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9ff5549b1d ]
In the WIN10 version of the Synthetic Video protocol with Hyper-V,
Hyper-V reports a list of supported resolutions as part of the protocol
negotiation. The driver calculates the maximum width and height from
the list of resolutions, and uses those maximums to validate any screen
resolution specified in the video= option on the kernel boot line.
This method of validation is incorrect. For example, the list of
supported resolutions could contain 1600x1200 and 1920x1080, both of
which fit in an 8 Mbyte frame buffer. But calculating the max width
and height yields 1920 and 1200, and 1920x1200 resolution does not fit
in an 8 Mbyte frame buffer. Unfortunately, this resolution is accepted,
causing a kernel fault when the driver accesses memory outside the
frame buffer.
Instead, validate the specified screen resolution by calculating
its size, and comparing against the frame buffer size. Delete the
code for calculating the max width and height from the list of
resolutions, since these max values have no use. Also add the
frame buffer size to the info message to aid in understanding why
a resolution might be rejected.
Fixes: 67e7cdb482 ("video: hyperv: hyperv_fb: Obtain screen resolution from Hyper-V host")
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://lore.kernel.org/r/1642360711-2335-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec961cf324 ]
The hardware is capable of controlling any non-contiguous sequence of
LEDs specified in the DT using qcom,enabled-strings as u32
array, and this also follows from the DT-bindings documentation. The
numbers specified in this array represent indices of the LED strings
that are to be enabled and disabled.
Its value is appropriately used to setup and enable string modules, but
completely disregarded in the set_brightness paths which only iterate
over the number of strings linearly.
Take an example where only string 2 is enabled with
qcom,enabled_strings=<2>: this string is appropriately enabled but
subsequent brightness changes would have only touched the zero'th
brightness register because num_strings is 1 here. This is simply
addressed by looking up the string for this index in the enabled_strings
array just like the other codepaths that iterate over num_strings.
Likewise enabled_strings is now also used in the autodetection path for
consistent behaviour: when a list of strings is specified in DT only
those strings will be probed for autodetection, analogous to how the
number of strings that need to be probed is already bound by
qcom,num-strings. After all autodetection uses the set_brightness
helpers to set an initial value, which could otherwise end up changing
brightness on a different set of strings.
Fixes: 775d2ffb4a ("backlight: qcom-wled: Restructure the driver for WLED3")
Fixes: 03b2b5e869 ("backlight: qcom-wled: Add support for WLED4 peripheral")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211115203459.1634079-10-marijn.suijten@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b4b49602f ]
The length of qcom,enabled-strings as property array is enough to
determine the number of strings to be enabled, without needing to set
qcom,num-strings to override the default number of strings when less
than the default (which is also the maximum) is provided in DT.
This also introduces an extra warning when qcom,num-strings is set,
denoting that it is not necessary to set both anymore. It is usually
more concise to set just qcom,num-length when a zero-based, contiguous
range of strings is needed (the majority of the cases), or to only set
qcom,enabled-strings when a specific set of indices is desired.
Fixes: 775d2ffb4a ("backlight: qcom-wled: Restructure the driver for WLED3")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211115203459.1634079-6-marijn.suijten@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
