Pull libnvdimm updates from Dan Williams:
"This adds a user for the new 'bytes-remaining' updates to
memcpy_mcsafe() that you already received through Ingo via the
x86-dax- for-linus pull.
Not included here, but still targeting this cycle, is support for
handling memory media errors (poison) consumed via userspace dax
mappings.
Summary:
- DAX broke a fundamental assumption of truncate of file mapped
pages. The truncate path assumed that it is safe to disconnect a
pinned page from a file and let the filesystem reclaim the physical
block. With DAX the page is equivalent to the filesystem block.
Introduce dax_layout_busy_page() to enable filesystems to wait for
pinned DAX pages to be released. Without this wait a filesystem
could allocate blocks under active device-DMA to a new file.
- DAX arranges for the block layer to be bypassed and uses
dax_direct_access() + copy_to_iter() to satisfy read(2) calls.
However, the memcpy_mcsafe() facility is available through the pmem
block driver. In order to safely handle media errors, via the DAX
block-layer bypass, introduce copy_to_iter_mcsafe().
- Fix cache management policy relative to the ACPI NFIT Platform
Capabilities Structure to properly elide cache flushes when they
are not necessary. The table indicates whether CPU caches are
power-fail protected. Clarify that a deep flush is always performed
on REQ_{FUA,PREFLUSH} requests"
* tag 'libnvdimm-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (21 commits)
dax: Use dax_write_cache* helpers
libnvdimm, pmem: Do not flush power-fail protected CPU caches
libnvdimm, pmem: Unconditionally deep flush on *sync
libnvdimm, pmem: Complete REQ_FLUSH => REQ_PREFLUSH
acpi, nfit: Remove ecc_unit_size
dax: dax_insert_mapping_entry always succeeds
libnvdimm, e820: Register all pmem resources
libnvdimm: Debug probe times
linvdimm, pmem: Preserve read-only setting for pmem devices
x86, nfit_test: Add unit test for memcpy_mcsafe()
pmem: Switch to copy_to_iter_mcsafe()
dax: Report bytes remaining in dax_iomap_actor()
dax: Introduce a ->copy_to_iter dax operation
uio, lib: Fix CONFIG_ARCH_HAS_UACCESS_MCSAFE compilation
xfs, dax: introduce xfs_break_dax_layouts()
xfs: prepare xfs_break_layouts() for another layout type
xfs: prepare xfs_break_layouts() to be called with XFS_MMAPLOCK_EXCL
mm, fs, dax: handle layout changes to pinned dax mappings
mm: fix __gup_device_huge vs unmap
mm: introduce MEMORY_DEVICE_FS_DAX and CONFIG_DEV_PAGEMAP_OPS
...
There is currently a mismatch between the resources that will trigger
the e820_pmem driver to register/load and the resources that will
actually be surfaced as pmem ranges. register_e820_pmem() uses
walk_iomem_res_desc() which includes children and siblings. In contrast,
e820_pmem_probe() only considers top level resources. For example the
following resource tree results in the driver being loaded, but no
resources being registered:
398000000000-39bfffffffff : PCI Bus 0000:ae
39be00000000-39bf07ffffff : PCI Bus 0000:af
39be00000000-39beffffffff : 0000:af:00.0
39be10000000-39beffffffff : Persistent Memory (legacy)
Fix this up to allow definitions of "legacy" pmem ranges anywhere in
system-physical address space. Not that it is a recommended or safe to
define a pmem range in PCI space, but it is useful for debug /
experimentation, and the restriction on being a top-level resource was
arbitrary.
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
We've got a bug report indicating a kernel panic at booting on an x86-32
system, and it turned out to be the invalid PCI resource assigned after
reallocation. __find_resource() first aligns the resource start address
and resets the end address with start+size-1 accordingly, then checks
whether it's contained. Here the end address may overflow the integer,
although resource_contains() still returns true because the function
validates only start and end address. So this ends up with returning an
invalid resource (start > end).
There was already an attempt to cover such a problem in the commit
47ea91b405 ("Resource: fix wrong resource window calculation"), but
this case is an overseen one.
This patch adds the validity check of the newly calculated resource for
avoiding the integer overflow problem.
Bugzilla: http://bugzilla.opensuse.org/show_bug.cgi?id=1086739
Link: http://lkml.kernel.org/r/s5hpo37d5l8.wl-tiwai@suse.de
Fixes: 23c570a674 ("resource: ability to resize an allocated resource")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reported-by: Michael Henders <hendersm@shaw.ca>
Tested-by: Michael Henders <hendersm@shaw.ca>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Set resource structs inserted by __reserve_region_with_split() to have the
correct type. Setting the type doesn't fix any functional problem but
makes %pR on the resource work better.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
When we reserve regions because the user specified a "reserve=" parameter,
set the resource type to either IORESOURCE_IO (for regions below 0x10000)
or IORESOURCE_MEM. The test for 0x10000 is just a heuristic; obviously
there can be memory below 0x10000 as well.
Improve documentation of the "reserve=" parameter.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
In commit c4004b02f8 ("x86: remove the kernel code/data/bss resources
from /proc/iomem") I was hoping to remove the phyiscal kernel address
data from /proc/iomem entirely, but that had to be reverted because some
system programs actually use it.
This limits all the detailed resource information to properly
credentialed users instead.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
insert_resource() and insert_resource_conflict() are called
by resource producers to insert a new resource. When there
is any conflict, they move conflicting resources down to the
children of the new resource. There is no destructor of these
interfaces, however.
Add remove_resource(), which removes a resource previously
inserted by insert_resource() or insert_resource_conflict(),
and moves the children up to where they were before.
__release_resource() is changed to have @release_child, so
that this function can be used for remove_resource() as well.
Also add comments to clarify that these functions are intended
for producers of resources to avoid any confusion with
request/release_resource() for consumers.
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
__request_region() sets 'flags' of a new resource from @parent
as it inherits the parent's attribute. When a target resource
has a conflict, this function inserts the new resource entry
under the conflicted entry by updating @parent. In this case,
the new resource entry needs to inherit attribute from the updated
parent. This conflict is a typical case since __request_region()
is used to allocate a new resource from a specific resource range.
For instance, request_mem_region() calls __request_region() with
@parent set to &iomem_resource, which is the root entry of the
whole iomem range. When this request results in inserting a new
entry "DEV-A" under "BUS-1", "DEV-A" needs to inherit from the
immediate parent "BUS-1" as it holds specific attribute for the
range.
root (&iomem_resource)
:
+ "BUS-1"
+ "DEV-A"
Change __request_region() to set 'flags' and 'desc' of a new entry
from the immediate parent.
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In __request_region, if a conflict with a BUSY and MUXED resource is
detected, then the caller goes to sleep and waits for the resource to be
released. A pointer on the conflicting resource is kept. At wake-up
this pointer is used as a parent to retry to request the region.
A first problem is that this pointer might well be invalid (if for
example the conflicting resource have already been freed). Another
problem is that the next call to __request_region() fails to detect a
remaining conflict. The previously conflicting resource is passed as a
parameter and __request_region() will look for a conflict among the
children of this resource and not at the resource itself. It is likely
to succeed anyway, even if there is still a conflict.
Instead, the parent of the conflicting resource should be passed to
__request_region().
As a fix, this patch doesn't update the parent resource pointer in the
case we have to wait for a muxed region right after.
Reported-and-tested-by: Vincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Tested-by: Vincent Donnefort <vdonnefort@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
walk_iomem_res() and region_intersects() still need to use
strcmp() for searching a resource entry by @name in the iomem
table.
This patch introduces I/O resource descriptor 'desc' in struct
resource for the iomem search interfaces. Drivers can assign
their unique descriptor to a range when they support the search
interfaces.
Otherwise, 'desc' is set to IORES_DESC_NONE (0). This avoids
changing most of the drivers as they typically allocate resource
entries statically, or by calling alloc_resource(), kzalloc(),
or alloc_bootmem_low(), which set the field to zero by default.
A later patch will address some drivers that use kmalloc()
without zero'ing the field.
Also change release_mem_region_adjustable() to set 'desc' when
its resource entry gets separated. Other resource interfaces are
also changed to initialize 'desc' explicitly although
alloc_resource() sets it to 0.
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jakub Sitnicki <jsitnicki@gmail.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm <linux-mm@kvack.org>
Link: http://lkml.kernel.org/r/1453841853-11383-4-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This effectively promotes IORESOURCE_BUSY to IORESOURCE_EXCLUSIVE
semantics by default. If userspace really believes it is safe to access
the memory region it can also perform the extra step of disabling an
active driver. This protects device address ranges with read side
effects and otherwise directs userspace to use the driver.
Persistent memory presents a large "mistake surface" to /dev/mem as now
accidental writes can corrupt a filesystem.
In general if a device driver is busily using a memory region it already
informs other parts of the kernel to not touch it via
request_mem_region(). /dev/mem should honor the same safety restriction
by default. Debugging a device driver from userspace becomes more
difficult with this enabled. Any application using /dev/mem or mmap of
sysfs pci resources will now need to perform the extra step of either:
1/ Disabling the driver, for example:
echo <device id> > /dev/bus/<parent bus>/drivers/<driver name>/unbind
2/ Rebooting with "iomem=relaxed" on the command line
3/ Recompiling with CONFIG_IO_STRICT_DEVMEM=n
Traditional users of /dev/mem like dosemu are unaffected because the
first 1MB of memory is not subject to the IO_STRICT_DEVMEM restriction.
Legacy X configurations use /dev/mem to talk to graphics hardware, but
that functionality has since moved to kernel graphics drivers.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
region_is_ram() is used to prevent the establishment of aliased mappings
to physical "System RAM" with incompatible cache settings. However, it
uses "-1" to indicate both "unknown" memory ranges (ranges not described
by platform firmware) and "mixed" ranges (where the parameters describe
a range that partially overlaps "System RAM").
Fix this up by explicitly tracking the "unknown" vs "mixed" resource
cases and returning REGION_INTERSECTS, REGION_MIXED, or REGION_DISJOINT.
This re-write also adds support for detecting when the requested region
completely eclipses all of a resource. Note, the implementation treats
overlaps between "unknown" and the requested memory type as
REGION_INTERSECTS.
Finally, other memory types can be passed in by name, for now the only
usage "System RAM".
Suggested-by: Luis R. Rodriguez <mcgrof@suse.com>
Reviewed-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
