[ Upstream commit f7853c34241807bb97673a5e97719123be39a09e ]
Henry reported that rt_mutex_adjust_prio_check() has an ordering
problem and puts the lie to the comment in [7]. Sharing the sort key
between lock->waiters and owner->pi_waiters *does* create problems,
since unlike what the comment claims, holding [L] is insufficient.
Notably, consider:
A
/ \
M1 M2
| |
B C
That is, task A owns both M1 and M2, B and C block on them. In this
case a concurrent chain walk (B & C) will modify their resp. sort keys
in [7] while holding M1->wait_lock and M2->wait_lock. So holding [L]
is meaningless, they're different Ls.
This then gives rise to a race condition between [7] and [11], where
the requeue of pi_waiters will observe an inconsistent tree order.
B C
(holds M1->wait_lock, (holds M2->wait_lock,
holds B->pi_lock) holds A->pi_lock)
[7]
waiter_update_prio();
...
[8]
raw_spin_unlock(B->pi_lock);
...
[10]
raw_spin_lock(A->pi_lock);
[11]
rt_mutex_enqueue_pi();
// observes inconsistent A->pi_waiters
// tree order
Fixing this means either extending the range of the owner lock from
[10-13] to [6-13], with the immediate problem that this means [6-8]
hold both blocked and owner locks, or duplicating the sort key.
Since the locking in chain walk is horrible enough without having to
consider pi_lock nesting rules, duplicate the sort key instead.
By giving each tree their own sort key, the above race becomes
harmless, if C sees B at the old location, then B will correct things
(if they need correcting) when it walks up the chain and reaches A.
Fixes: fb00aca474 ("rtmutex: Turn the plist into an rb-tree")
Reported-by: Henry Wu <triangletrap12@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Henry Wu <triangletrap12@gmail.com>
Link: https://lkml.kernel.org/r/20230707161052.GF2883469%40hirez.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
The new rt_mutex_spin_on_onwer() loop checks whether the spinning waiter is
still the top waiter on the lock by utilizing rt_mutex_top_waiter(), which
is broken because that function contains a sanity check which dereferences
the top waiter pointer to check whether the waiter belongs to the
lock. That's wrong in the lockless spinwait case:
CPU 0 CPU 1
rt_mutex_lock(lock) rt_mutex_lock(lock);
queue(waiter0)
waiter0 == rt_mutex_top_waiter(lock)
rt_mutex_spin_on_onwer(lock, waiter0) { queue(waiter1)
waiter1 == rt_mutex_top_waiter(lock)
...
top_waiter = rt_mutex_top_waiter(lock)
leftmost = rb_first_cached(&lock->waiters);
-> signal
dequeue(waiter1)
destroy(waiter1)
w = rb_entry(leftmost, ....)
BUG_ON(w->lock != lock) <- UAF
The BUG_ON() is correct for the case where the caller holds lock->wait_lock
which guarantees that the leftmost waiter entry cannot vanish. For the
lockless spinwait case it's broken.
Create a new helper function which avoids the pointer dereference and just
compares the leftmost entry pointer with current's waiter pointer to
validate that currrent is still elegible for spinning.
Fixes: 992caf7f17 ("locking/rtmutex: Add adaptive spinwait mechanism")
Reported-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210825102453.981720644@linutronix.de
Add an rtlock_task pointer to rt_mutex_wake_q, which allows to handle the RT
specific wakeup for spin/rwlock waiters. The pointer is just consuming 4/8
bytes on the stack so it is provided unconditionaly to avoid #ifdeffery all
over the place.
This cannot use a regular wake_q, because a task can have concurrent wakeups which
would make it miss either lock or the regular wakeups, depending on what gets
queued first, unless task struct gains a separate wake_q_node for this, which
would be overkill, because there can only be a single task which gets woken
up in the spin/rw_lock unlock path.
No functional change for non-RT enabled kernels.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210815211303.253614678@linutronix.de
To handle the difference between wakeups for regular sleeping locks (mutex,
rtmutex, rw_semaphore) and the wakeups for 'sleeping' spin/rwlocks on
PREEMPT_RT enabled kernels correctly, it is required to provide a
wake_q_head construct which allows to keep them separate.
Provide a wrapper around wake_q_head and the required helpers, which will be
extended with the state handling later.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210815211303.139337655@linutronix.de
Regular sleeping locks like mutexes, rtmutexes and rw_semaphores are always
entering and leaving a blocking section with task state == TASK_RUNNING.
On a non-RT kernel spinlocks and rwlocks never affect the task state, but
on RT kernels these locks are converted to rtmutex based 'sleeping' locks.
So in case of contention the task goes to block, which requires to carefully
preserve the task state, and restore it after acquiring the lock taking
regular wakeups for the task into account, which happened while the task was
blocked. This state preserving is achieved by having a separate task state
for blocking on a RT spin/rwlock and a saved_state field in task_struct
along with careful handling of these wakeup scenarios in try_to_wake_up().
To avoid conditionals in the rtmutex code, store the wake state which has
to be used for waking a lock waiter in rt_mutex_waiter which allows to
handle the regular and RT spin/rwlocks by handing it to wake_up_state().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210815211303.079800739@linutronix.de
RT builds substitutions for rwsem, mutex, spinlock and rwlock around
rtmutexes. Split the inner working out so each lock substitution can use
them with the appropriate lockdep annotations. This avoids having an extra
unused lockdep map in the wrapped rtmutex.
No functional change.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210815211302.784739994@linutronix.de
The rtmutex specific deadlock detector predates lockdep coverage of rtmutex
and since commit f5694788ad ("rt_mutex: Add lockdep annotations") it
contains a lot of redundant functionality:
- lockdep will detect an potential deadlock before rtmutex-debug
has a chance to do so
- the deadlock debugging is restricted to rtmutexes which are not
associated to futexes and have an active waiter, which is covered by
lockdep already
Remove the redundant functionality and move actual deadlock WARN() into the
deadlock code path. The latter needs a seperate cleanup.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210326153943.320398604@linutronix.de
The following debug members of 'struct rtmutex' are unused:
- save_state: No users
- file,line: Printed if ::name is NULL. This is only used for non-futex
locks so ::name is never NULL
- magic: Assigned to NULL by rt_mutex_destroy(), no further usage
Remove them along with unused inline and macro leftovers related to
the long gone deadlock tester.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210326153943.195064296@linutronix.de
Update wake_futex_pi() and kill the call altogether. This is possible because:
(i) The case of fixup_owner() in which the pi_mutex was stolen from the
signaled enqueued top-waiter which fails to trylock and doesn't see a
current owner of the rtmutex but needs to acknowledge an non-enqueued
higher priority waiter, which is the other alternative. This used to be
handled by rt_mutex_next_owner(), which guaranteed fixup_pi_state_owner('newowner')
never to be nil. Nowadays the logic is handled by an EAGAIN loop, without
the need of rt_mutex_next_owner(). Specifically:
c1e2f0eaf0 (futex: Avoid violating the 10th rule of futex)
9f5d1c336a (futex: Handle transient "ownerless" rtmutex state correctly)
(ii) rt_mutex_next_owner() and rt_mutex_top_waiter() are semantically
equivalent, as of:
c28d62cf52 (locking/rtmutex: Handle non enqueued waiters gracefully in remove_waiter())
So instead of keeping the call around, just use the good ole rt_mutex_top_waiter().
No change in semantics.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210226175029.50335-1-dave@stgolabs.net
In -RT task_blocks_on_rt_mutex() may return with -EAGAIN due to
(->pi_blocked_on == PI_WAKEUP_INPROGRESS) before it added itself as a
waiter. In such a case remove_waiter() must not be called because without a
waiter it will trigger the BUG_ON() statement.
This was initially reported by Yimin Deng. Thomas Gleixner fixed it then
with an explicit check for waiters before calling remove_waiter().
Instead of an explicit NULL check before calling rt_mutex_top_waiter() make
the function return NULL if there are no waiters. With that fixed the now
pointless NULL check is removed from rt_mutex_slowlock().
Reported-and-debugged-by: Yimin Deng <yimin11.deng@gmail.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/CAAh1qt=DCL9aUXNxanP5BKtiPp3m+qj4yB+gDohhXPVFCxWwzg@mail.gmail.com
Link: https://lkml.kernel.org/r/20180327121438.sss7hxg3crqy4ecd@linutronix.de
Julia reported futex state corruption in the following scenario:
waiter waker stealer (prio > waiter)
futex(WAIT_REQUEUE_PI, uaddr, uaddr2,
timeout=[N ms])
futex_wait_requeue_pi()
futex_wait_queue_me()
freezable_schedule()
<scheduled out>
futex(LOCK_PI, uaddr2)
futex(CMP_REQUEUE_PI, uaddr,
uaddr2, 1, 0)
/* requeues waiter to uaddr2 */
futex(UNLOCK_PI, uaddr2)
wake_futex_pi()
cmp_futex_value_locked(uaddr2, waiter)
wake_up_q()
<woken by waker>
<hrtimer_wakeup() fires,
clears sleeper->task>
futex(LOCK_PI, uaddr2)
__rt_mutex_start_proxy_lock()
try_to_take_rt_mutex() /* steals lock */
rt_mutex_set_owner(lock, stealer)
<preempted>
<scheduled in>
rt_mutex_wait_proxy_lock()
__rt_mutex_slowlock()
try_to_take_rt_mutex() /* fails, lock held by stealer */
if (timeout && !timeout->task)
return -ETIMEDOUT;
fixup_owner()
/* lock wasn't acquired, so,
fixup_pi_state_owner skipped */
return -ETIMEDOUT;
/* At this point, we've returned -ETIMEDOUT to userspace, but the
* futex word shows waiter to be the owner, and the pi_mutex has
* stealer as the owner */
futex_lock(LOCK_PI, uaddr2)
-> bails with EDEADLK, futex word says we're owner.
And suggested that what commit:
73d786bd04 ("futex: Rework inconsistent rt_mutex/futex_q state")
removes from fixup_owner() looks to be just what is needed. And indeed
it is -- I completely missed that requeue_pi could also result in this
case. So we need to restore that, except that subsequent patches, like
commit:
16ffa12d74 ("futex: Pull rt_mutex_futex_unlock() out from under hb->lock")
changed all the locking rules. Even without that, the sequence:
- if (rt_mutex_futex_trylock(&q->pi_state->pi_mutex)) {
- locked = 1;
- goto out;
- }
- raw_spin_lock_irq(&q->pi_state->pi_mutex.wait_lock);
- owner = rt_mutex_owner(&q->pi_state->pi_mutex);
- if (!owner)
- owner = rt_mutex_next_owner(&q->pi_state->pi_mutex);
- raw_spin_unlock_irq(&q->pi_state->pi_mutex.wait_lock);
- ret = fixup_pi_state_owner(uaddr, q, owner);
already suggests there were races; otherwise we'd never have to look
at next_owner.
So instead of doing 3 consecutive wait_lock sections with who knows
what races, we do it all in a single section. Additionally, the usage
of pi_state->owner in fixup_owner() was only safe because only the
rt_mutex owner would modify it, which this additional case wrecks.
Luckily the values can only change away and not to the value we're
testing, this means we can do a speculative test and double check once
we have the wait_lock.
Fixes: 73d786bd04 ("futex: Rework inconsistent rt_mutex/futex_q state")
Reported-by: Julia Cartwright <julia@ni.com>
Reported-by: Gratian Crisan <gratian.crisan@ni.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Julia Cartwright <julia@ni.com>
Tested-by: Gratian Crisan <gratian.crisan@ni.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20171208124939.7livp7no2ov65rrc@hirez.programming.kicks-ass.net
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rt_mutex_waiter::prio is a copy of task_struct::prio which is updated
during the PI chain walk, such that the PI chain order isn't messed up
by (asynchronous) task state updates.
Currently rt_mutex_waiter_less() uses task state for deadline tasks;
this is broken, since the task state can, as said above, change
asynchronously, causing the RB tree order to change without actual
tree update -> FAIL.
Fix this by also copying the deadline into the rt_mutex_waiter state
and updating it along with its prio field.
Ideally we would also force PI chain updates whenever DL tasks update
their deadline parameter, but for first approximation this is less
broken than it was.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: juri.lelli@arm.com
Cc: bigeasy@linutronix.de
Cc: xlpang@redhat.com
Cc: rostedt@goodmis.org
Cc: mathieu.desnoyers@efficios.com
Cc: jdesfossez@efficios.com
Cc: bristot@redhat.com
Link: http://lkml.kernel.org/r/20170323150216.403992539@infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We should deboost before waking the high-priority task, such that we
don't run two tasks with the same "state" (priority, deadline,
sched_class, etc).
In order to make sure the boosting task doesn't start running between
unlock and deboost (due to 'spurious' wakeup), we move the deboost
under the wait_lock, that way its serialized against the wait loop in
__rt_mutex_slowlock().
Doing the deboost early can however lead to priority-inversion if
current would get preempted after the deboost but before waking our
high-prio task, hence we disable preemption before doing deboost, and
enabling it after the wake up is over.
This gets us the right semantic order, but most importantly however;
this change ensures pointer stability for the next patch, where we
have rt_mutex_setprio() cache a pointer to the top-most waiter task.
If we, as before this change, do the wakeup first and then deboost,
this pointer might point into thin air.
[peterz: Changelog + patch munging]
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: juri.lelli@arm.com
Cc: bigeasy@linutronix.de
Cc: mathieu.desnoyers@efficios.com
Cc: jdesfossez@efficios.com
Cc: bristot@redhat.com
Link: http://lkml.kernel.org/r/20170323150216.110065320@infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
