commit 6d6e54fc71ad1ab0a87047fd9c211e75d86084a3 upstream.
For fixing CVE-2023-6270, f98364e92662 ("aoe: fix the potential
use-after-free problem in aoecmd_cfg_pkts") makes tx() calling dev_put()
instead of doing in aoecmd_cfg_pkts(). It avoids that the tx() runs
into use-after-free.
Then Nicolai Stange found more places in aoe have potential use-after-free
problem with tx(). e.g. revalidate(), aoecmd_ata_rw(), resend(), probe()
and aoecmd_cfg_rsp(). Those functions also use aoenet_xmit() to push
packet to tx queue. So they should also use dev_hold() to increase the
refcnt of skb->dev.
On the other hand, moving dev_put() to tx() causes that the refcnt of
skb->dev be reduced to a negative value, because corresponding
dev_hold() are not called in revalidate(), aoecmd_ata_rw(), resend(),
probe(), and aoecmd_cfg_rsp(). This patch fixed this issue.
Cc: stable@vger.kernel.org
Link: https://nvd.nist.gov/vuln/detail/CVE-2023-6270
Fixes: f98364e92662 ("aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts")
Reported-by: Nicolai Stange <nstange@suse.com>
Signed-off-by: Chun-Yi Lee <jlee@suse.com>
Link: https://lore.kernel.org/stable/20240624064418.27043-1-jlee%40suse.com
Link: https://lore.kernel.org/r/20241002035458.24401-1-jlee@suse.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 667ea36378cf7f669044b27871c496e1559c872a ]
QUEUE_FLAG_NOMERGES isn't really a driver interface, but a user tunable.
There also isn't any good reason to set it in the loop driver.
The original commit adding it (5b5e20f421 "block: loop: set
QUEUE_FLAG_NOMERGES for request queue of loop") claims that "It doesn't
make sense to enable merge because the I/O submitted to backing file is
handled page by page." which of course isn't true for multi-page bvec
now, and it never has been for direct I/O, for which commit 40326d8a33
("block/loop: allow request merge for directio mode") alredy disabled
the nomerges flag.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240627124926.512662-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a5e61b50c9f44c5edb6e134ede6fee8806ffafa9 upstream.
If the net_conf pointer is NULL and the code attempts to access its
fields without a check, it will lead to a null pointer dereference.
Add a NULL check before dereferencing the pointer.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 44ed167da7 ("drbd: rcu_read_lock() and rcu_dereference() for tconn->net_conf")
Cc: stable@vger.kernel.org
Signed-off-by: Mikhail Lobanov <m.lobanov@rosalinux.ru>
Link: https://lore.kernel.org/r/20240909133740.84297-1-m.lobanov@rosalinux.ru
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2f02b5af3a4482b216e6a466edecf6ba8450fa45 upstream.
The violation of atomicity occurs when the drbd_uuid_set_bm function is
executed simultaneously with modifying the value of
device->ldev->md.uuid[UI_BITMAP]. Consider a scenario where, while
device->ldev->md.uuid[UI_BITMAP] passes the validity check when its
value is not zero, the value of device->ldev->md.uuid[UI_BITMAP] is
written to zero. In this case, the check in drbd_uuid_set_bm might refer
to the old value of device->ldev->md.uuid[UI_BITMAP] (before locking),
which allows an invalid value to pass the validity check, resulting in
inconsistency.
To address this issue, it is recommended to include the data validity
check within the locked section of the function. This modification
ensures that the value of device->ldev->md.uuid[UI_BITMAP] does not
change during the validation process, thereby maintaining its integrity.
This possible bug is found by an experimental static analysis tool
developed by our team. This tool analyzes the locking APIs to extract
function pairs that can be concurrently executed, and then analyzes the
instructions in the paired functions to identify possible concurrency
bugs including data races and atomicity violations.
Fixes: 9f2247bb9b ("drbd: Protect accesses to the uuid set with a spinlock")
Cc: stable@vger.kernel.org
Signed-off-by: Qiu-ji Chen <chenqiuji666@gmail.com>
Reviewed-by: Philipp Reisner <philipp.reisner@linbit.com>
Link: https://lore.kernel.org/r/20240913083504.10549-1-chenqiuji666@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c9ea57c91f03bcad415e1a20113bdb2077bcf990 ]
If request timetout is handled by nbd_requeue_cmd(), normal completion
has to be stopped for avoiding to complete this requeued request, other
use-after-free can be triggered.
Fix the race by clearing NBD_CMD_INFLIGHT in nbd_requeue_cmd(), meantime
make sure that cmd->lock is grabbed for clearing the flag and the
requeue.
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Yu Kuai <yukuai3@huawei.com>
Fixes: 2895f1831e ("nbd: don't clear 'NBD_CMD_INFLIGHT' flag if request is not completed")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240830034145.1827742-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e58f5142f88320a5b1449f96a146f2f24615c5c7 ]
When two UBLK_CMD_START_USER_RECOVERY commands are submitted, the
first one sets 'ubq->ubq_daemon' to NULL, and the second one triggers
WARN in ublk_queue_reinit() and subsequently a NULL pointer dereference
issue.
Fix it by adding the check in ublk_ctrl_start_recovery() and return
immediately in case of zero 'ub->nr_queues_ready'.
BUG: kernel NULL pointer dereference, address: 0000000000000028
RIP: 0010:ublk_ctrl_start_recovery.constprop.0+0x82/0x180
Call Trace:
<TASK>
? __die+0x20/0x70
? page_fault_oops+0x75/0x170
? exc_page_fault+0x64/0x140
? asm_exc_page_fault+0x22/0x30
? ublk_ctrl_start_recovery.constprop.0+0x82/0x180
ublk_ctrl_uring_cmd+0x4f7/0x6c0
? pick_next_task_idle+0x26/0x40
io_uring_cmd+0x9a/0x1b0
io_issue_sqe+0x193/0x3f0
io_wq_submit_work+0x9b/0x390
io_worker_handle_work+0x165/0x360
io_wq_worker+0xcb/0x2f0
? finish_task_switch.isra.0+0x203/0x290
? finish_task_switch.isra.0+0x203/0x290
? __pfx_io_wq_worker+0x10/0x10
ret_from_fork+0x2d/0x50
? __pfx_io_wq_worker+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Fixes: c732a852b4 ("ublk_drv: add START_USER_RECOVERY and END_USER_RECOVERY support")
Reported-and-tested-by: Changhui Zhong <czhong@redhat.com>
Closes: https://lore.kernel.org/all/CAGVVp+UvLiS+bhNXV-h2icwX1dyybbYHeQUuH7RYqUvMQf6N3w@mail.gmail.com
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Li Nan <linan122@huawei.com>
Link: https://lore.kernel.org/r/20240904031348.4139545-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2237ceb71f89837ac47c5dce2aaa2c2b3a337a3c upstream.
Every time a watch is reestablished after getting lost, we need to
update the cookie which involves quiescing exclusive lock. For this,
we transition from RBD_LOCK_STATE_LOCKED to RBD_LOCK_STATE_QUIESCING
roughly for the duration of rbd_reacquire_lock() call. If the mapping
is exclusive and I/O happens to arrive in this time window, it's failed
with EROFS (later translated to EIO) based on the wrong assumption in
rbd_img_exclusive_lock() -- "lock got released?" check there stopped
making sense with commit a2b1da0979 ("rbd: lock should be quiesced on
reacquire").
To make it worse, any such I/O is added to the acquiring list before
EROFS is returned and this sets up for violating rbd_lock_del_request()
precondition that the request is either on the running list or not on
any list at all -- see commit ded080c86b3f ("rbd: don't move requests
to the running list on errors"). rbd_lock_del_request() ends up
processing these requests as if they were on the running list which
screws up quiescing_wait completion counter and ultimately leads to
rbd_assert(!completion_done(&rbd_dev->quiescing_wait));
being triggered on the next watch error.
Cc: stable@vger.kernel.org # 06ef84c4e9c4: rbd: rename RBD_LOCK_STATE_RELEASING and releasing_wait
Cc: stable@vger.kernel.org
Fixes: 637cd06053 ("rbd: new exclusive lock wait/wake code")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f5c466a0fdb2d9f3650d2e3911b0735f17ba00cf upstream.
... to RBD_LOCK_STATE_QUIESCING and quiescing_wait to recognize that
this state and the associated completion are backing rbd_quiesce_lock(),
which isn't specific to releasing the lock.
While exclusive lock does get quiesced before it's released, it also
gets quiesced before an attempt to update the cookie is made and there
the lock is not released as long as ceph_cls_set_cookie() succeeds.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3ceccb14f5576e02b81cc8b105ab81f224bd87f6 upstream.
Expanding on the previous commit, assuming that rbd_is_lock_owner()
always returns true (i.e. that we are either in RBD_LOCK_STATE_LOCKED
or RBD_LOCK_STATE_QUIESCING) if the mapping is exclusive is wrong too.
In case ceph_cls_set_cookie() fails, the lock would be temporarily
released even if the mapping is exclusive, meaning that we can end up
even in RBD_LOCK_STATE_UNLOCKED.
IOW, exclusive mappings are really "just" about disabling automatic
lock transitions (as documented in the man page), not about grabbing
the lock and holding on to it whatever it takes.
Cc: stable@vger.kernel.org
Fixes: 637cd06053 ("rbd: new exclusive lock wait/wake code")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b164316808ec5de391c3e7b0148ec937d32d280d ]
A zoned device with a smaller last zone together with a zone capacity
smaller than the zone size does make any sense as that does not
correspond to any possible setup for a real device:
1) For ZNS and zoned UFS devices, all zones are always the same size.
2) For SMR HDDs, all zones always have the same capacity.
In other words, if we have a smaller last runt zone, then this zone
capacity should always be equal to the zone size.
Add a check in null_init_zoned_dev() to prevent a configuration to have
both a smaller zone size and a zone capacity smaller than the zone size.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240530054035.491497-2-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f98364e926626c678fb4b9004b75cacf92ff0662 ]
This patch is against CVE-2023-6270. The description of cve is:
A flaw was found in the ATA over Ethernet (AoE) driver in the Linux
kernel. The aoecmd_cfg_pkts() function improperly updates the refcnt on
`struct net_device`, and a use-after-free can be triggered by racing
between the free on the struct and the access through the `skbtxq`
global queue. This could lead to a denial of service condition or
potential code execution.
In aoecmd_cfg_pkts(), it always calls dev_put(ifp) when skb initial
code is finished. But the net_device ifp will still be used in
later tx()->dev_queue_xmit() in kthread. Which means that the
dev_put(ifp) should NOT be called in the success path of skb
initial code in aoecmd_cfg_pkts(). Otherwise tx() may run into
use-after-free because the net_device is freed.
This patch removed the dev_put(ifp) in the success path in
aoecmd_cfg_pkts(), and added dev_put() after skb xmit in tx().
Link: https://nvd.nist.gov/vuln/detail/CVE-2023-6270
Fixes: 7562f876cd ("[NET]: Rework dev_base via list_head (v3)")
Signed-off-by: Chun-Yi Lee <jlee@suse.com>
Link: https://lore.kernel.org/r/20240305082048.25526-1-jlee@suse.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ce6e2db00de8103a0687fb0f65fd17124a51aaa ]
Ensure no remaining requests in virtqueues before resetting vdev and
deleting virtqueues. Otherwise these requests will never be completed.
It may cause the system to become unresponsive.
Function blk_mq_quiesce_queue() can ensure that requests have become
in_flight status, but it cannot guarantee that requests have been
processed by the device. Virtqueues should never be deleted before
all requests become complete status.
Function blk_mq_freeze_queue() ensure that all requests in virtqueues
become complete status. And no requests can enter in virtqueues.
Signed-off-by: Yi Sun <yi.sun@unisoc.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20240129085250.1550594-1-yi.sun@unisoc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e169bd4fb2b36c4b2bee63c35c740c85daeb2e86 ]
Move set_capacity() outside of the section procected by (&d->lock).
To avoid possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
[1] lock(&bdev->bd_size_lock);
local_irq_disable();
[2] lock(&d->lock);
[3] lock(&bdev->bd_size_lock);
<Interrupt>
[4] lock(&d->lock);
*** DEADLOCK ***
Where [1](&bdev->bd_size_lock) hold by zram_add()->set_capacity().
[2]lock(&d->lock) hold by aoeblk_gdalloc(). And aoeblk_gdalloc()
is trying to acquire [3](&bdev->bd_size_lock) at set_capacity() call.
In this situation an attempt to acquire [4]lock(&d->lock) from
aoecmd_cfg_rsp() will lead to deadlock.
So the simplest solution is breaking lock dependency
[2](&d->lock) -> [3](&bdev->bd_size_lock) by moving set_capacity()
outside.
Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240124072436.3745720-2-bigunclemax@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e4bf6a08d1e127bcc4bd72557f2dfafc6bc7f41 ]
Since "dev_search_path" can technically be as large as PATH_MAX,
there was a risk of truncation when copying it and a second string
into "full_path" since it was also PATH_MAX sized. The W=1 builds were
reporting this warning:
drivers/block/rnbd/rnbd-srv.c: In function 'process_msg_open.isra':
drivers/block/rnbd/rnbd-srv.c:616:51: warning: '%s' directive output may be truncated writing up to 254 bytes into a region of size between 0 and 4095 [-Wformat-truncation=]
616 | snprintf(full_path, PATH_MAX, "%s/%s",
| ^~
In function 'rnbd_srv_get_full_path',
inlined from 'process_msg_open.isra' at drivers/block/rnbd/rnbd-srv.c:721:14: drivers/block/rnbd/rnbd-srv.c:616:17: note: 'snprintf' output between 2 and 4351 bytes into a destination of size 4096
616 | snprintf(full_path, PATH_MAX, "%s/%s",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
617 | dev_search_path, dev_name);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~
To fix this, unconditionally check for truncation (as was already done
for the case where "%SESSNAME%" was present).
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312100355.lHoJPgKy-lkp@intel.com/
Cc: Md. Haris Iqbal <haris.iqbal@ionos.com>
Cc: Jack Wang <jinpu.wang@ionos.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <linux-block@vger.kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20231212214738.work.169-kees@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ded080c86b3f99683774af0441a58fc2e3d60cae upstream.
The running list is supposed to contain requests that are pinning the
exclusive lock, i.e. those that must be flushed before exclusive lock
is released. When wake_lock_waiters() is called to handle an error,
requests on the acquiring list are failed with that error and no
flushing takes place. Briefly moving them to the running list is not
only pointless but also harmful: if exclusive lock gets acquired
before all of their state machines are scheduled and go through
rbd_lock_del_request(), we trigger
rbd_assert(list_empty(&rbd_dev->running_list));
in rbd_try_acquire_lock().
Cc: stable@vger.kernel.org
Fixes: 637cd06053 ("rbd: new exclusive lock wait/wake code")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit baa7d536077dcdfe2b70c476a8873d1745d3de0f ]
__loop_update_dio only checks the alignment requirement for block backed
file systems, but misses them for the case where the loop device is
created directly on top of another block device. Due to this creating
a loop device with default option plus the direct I/O flag on a > 512 byte
sector size file system will lead to incorrect I/O being submitted to the
lower block device and a lot of error from the lock layer. This can
be seen with xfstests generic/563.
Fix the code in __loop_update_dio by factoring the alignment check into
a helper, and calling that also for the struct block_device of a block
device inode.
Also remove the TODO comment talking about dynamically switching between
buffered and direct I/O, which is a would be a recipe for horrible
performance and occasional data loss.
Fixes: 2e5ab5f379 ("block: loop: prepare for supporing direct IO")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20240117175901.871796-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a9525de865410047fa962867b4fcd33943b206f ]
null_blk has some rather odd capping of the max_hw_sectors value to
BLK_DEF_MAX_SECTORS, which doesn't make sense - max_hw_sector is the
hardware limit, and BLK_DEF_MAX_SECTORS despite the confusing name is the
default cap for the max_sectors field used for normal file system I/O.
Remove all the capping, and simply leave it to the block layer or
user to take up or not all of that for file system I/O.
Fixes: ea17fd354c ("null_blk: Allow controlling max_hw_sectors limit")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231227092305.279567-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b8e0792449928943c15d1af9f63816911d139267 ]
Commit 4e04005256 ("virtio-blk: support polling I/O") triggers the
following gcc 13 W=1 warnings:
drivers/block/virtio_blk.c: In function ‘init_vq’:
drivers/block/virtio_blk.c:1077:68: warning: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size 7 [-Wformat-truncation=]
1077 | snprintf(vblk->vqs[i].name, VQ_NAME_LEN, "req_poll.%d", i);
| ^~
drivers/block/virtio_blk.c:1077:58: note: directive argument in the range [-2147483648, 65534]
1077 | snprintf(vblk->vqs[i].name, VQ_NAME_LEN, "req_poll.%d", i);
| ^~~~~~~~~~~~~
drivers/block/virtio_blk.c:1077:17: note: ‘snprintf’ output between 11 and 21 bytes into a destination of size 16
1077 | snprintf(vblk->vqs[i].name, VQ_NAME_LEN, "req_poll.%d", i);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This is a false positive because the lower bound -2147483648 is
incorrect. The true range of i is [0, num_vqs - 1] where 0 < num_vqs <
65536.
The code mixes int, unsigned short, and unsigned int types in addition
to using "%d" for an unsigned value. Use unsigned short and "%u"
consistently to solve the compiler warning.
Cc: Suwan Kim <suwan.kim027@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312041509.DIyvEt9h-lkp@intel.com/
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20231204140743.1487843-1-stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
