This is the 6.1.115 stable release
* tag 'v6.1.115': (2780 commits)
Linux 6.1.115
xfrm: validate new SA's prefixlen using SA family when sel.family is unset
arm64/uprobes: change the uprobe_opcode_t typedef to fix the sparse warning
ACPI: PRM: Clean up guid type in struct prm_handler_info
platform/x86: dell-wmi: Ignore suspend notifications
ASoC: qcom: Fix NULL Dereference in asoc_qcom_lpass_cpu_platform_probe()
net: phy: dp83822: Fix reset pin definitions
serial: protect uart_port_dtr_rts() in uart_shutdown() too
selinux: improve error checking in sel_write_load()
drm/amd/display: Disable PSR-SU on Parade 08-01 TCON too
hv_netvsc: Fix VF namespace also in synthetic NIC NETDEV_REGISTER event
xfrm: fix one more kernel-infoleak in algo dumping
LoongArch: Get correct cores_per_package for SMT systems
ALSA: hda/realtek: Add subwoofer quirk for Acer Predator G9-593
KVM: arm64: Don't eagerly teardown the vgic on init error
KVM: nSVM: Ignore nCR3[4:0] when loading PDPTEs from memory
openat2: explicitly return -E2BIG for (usize > PAGE_SIZE)
nilfs2: fix kernel bug due to missing clearing of buffer delay flag
ACPI: button: Add DMI quirk for Samsung Galaxy Book2 to fix initial lid detection issue
ACPI: PRM: Find EFI_MEMORY_RUNTIME block for PRM handler and context
...
Change-Id: Iee600c49a5c914b79141c62cda38e787e429a167
Conflicts:
arch/arm64/boot/dts/rockchip/rk356x.dtsi
drivers/gpio/gpio-rockchip.c
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
drivers/gpu/drm/rockchip/rockchip_drm_vop.c
drivers/gpu/drm/rockchip/rockchip_drm_vop.h
drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
drivers/gpu/drm/rockchip/rockchip_vop_reg.c
drivers/media/i2c/imx335.c
drivers/pci/controller/dwc/pcie-dw-rockchip.c
drivers/spi/spi-rockchip.c
drivers/spi/spidev.c
drivers/usb/dwc3/gadget.c
drivers/usb/host/xhci.h
This reverts commit b8f2e67cb1.
Replaced by CONFIG_WERROR.
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
Change-Id: I40736915b4bda71aa404ce9b12aacec30ffb275b
This reverts commit e9fa201a63.
Replaced by CONFIG_WERROR.
Change-Id: I19bfd33456be16f52c7d45252f612d8a8961e139
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
This is the 6.1.99 stable release
* tag 'v6.1.99': (1975 commits)
Linux 6.1.99
Revert "usb: xhci: prevent potential failure in handle_tx_event() for Transfer events without TRB"
Linux 6.1.98
nilfs2: fix incorrect inode allocation from reserved inodes
null_blk: Do not allow runt zone with zone capacity smaller then zone size
spi: cadence: Ensure data lines set to low during dummy-cycle period
nfc/nci: Add the inconsistency check between the input data length and count
kbuild: fix short log for AS in link-vmlinux.sh
nvmet: fix a possible leak when destroy a ctrl during qp establishment
platform/x86: touchscreen_dmi: Add info for the EZpad 6s Pro
platform/x86: touchscreen_dmi: Add info for GlobalSpace SolT IVW 11.6" tablet
regmap-i2c: Subtract reg size from max_write
nvme: adjust multiples of NVME_CTRL_PAGE_SIZE in offset
dma-mapping: benchmark: avoid needless copy_to_user if benchmark fails
nvme-multipath: find NUMA path only for online numa-node
ALSA: hda/realtek: Enable headset mic of JP-IK LEAP W502 with ALC897
fs/ntfs3: Mark volume as dirty if xattr is broken
i2c: pnx: Fix potential deadlock warning from del_timer_sync() call in isr
clk: mediatek: mt8183: Only enable runtime PM on mt8183-mfgcfg
clk: mediatek: clk-mtk: Register MFG notifier in mtk_clk_simple_probe()
...
Change-Id: Ibf9c2caa3bbffb7a960e82ec6c2b0b497753778c
Conflicts:
arch/arm64/boot/dts/rockchip/rk3328.dtsi
drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
drivers/pinctrl/pinctrl-rockchip.c
drivers/usb/gadget/function/u_audio.c
include/linux/usb/quirks.h
mm/cma.c
sound/soc/rockchip/rockchip_i2s_tdm.c
[ Upstream commit 984ed20ece1c6c20789ece040cbff3eb1a388fa9 ]
If you enable "Option -> Show Debug Info" and click a link, the program
terminates with the following error:
*** buffer overflow detected ***: terminated
The buffer overflow is caused by the following line:
strcat(data, "$");
The buffer needs one more byte to accommodate the additional character.
Fixes: c4f7398bee ("kconfig: qconf: make debug links work again")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 33330bcf031818e60a816db0cfd3add9eecc3b28 ]
When merging files without trailing newlines at the end of the file, two
config fragments end up at the same row if file1.config doens't have a
trailing newline at the end of the file.
file1.config "CONFIG_1=y"
file2.config "CONFIG_2=y"
./scripts/kconfig/merge_config.sh -m .config file1.config file2.config
This will generate a .config looking like this.
cat .config
...
CONFIG_1=yCONFIG_2=y"
Making sure so we add a newline at the end of every config file that is
passed into the script.
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e98db17837093cb0f4dcfcc3524739d93249c45 ]
`bindgen` 0.69.0 contains a bug: `--version` does not work without
providing a header [1]:
error: the following required arguments were not provided:
<HEADER>
Usage: bindgen <FLAGS> <OPTIONS> <HEADER> -- <CLANG_ARGS>...
Thus, in preparation for supporting several `bindgen` versions, work
around the issue by passing a dummy argument.
Include a comment so that we can remove the workaround in the future.
Link: https://github.com/rust-lang/rust-bindgen/pull/2678 [1]
Reviewed-by: Finn Behrens <me@kloenk.dev>
Tested-by: Benno Lossin <benno.lossin@proton.me>
Tested-by: Andreas Hindborg <a.hindborg@samsung.com>
Link: https://lore.kernel.org/r/20240709160615.998336-9-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Stable-dep-of: 5ce86c6c8613 ("rust: suppress error messages from CONFIG_{RUSTC,BINDGEN}_VERSION_TEXT")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f295522886a4ebb628cadb2cd74d0661d6292978 ]
The script already checks if `$RUSTC` and `$BINDGEN` exists via
`command`, but the environment variables may point to a
non-executable file, or the programs may fail for some other reason.
While the script successfully exits with a failure as it should,
the error given can be quite confusing depending on the shell and
the behavior of its `command`. For instance, with `dash`:
$ RUSTC=./mm BINDGEN=bindgen CC=clang scripts/rust_is_available.sh
scripts/rust_is_available.sh: 19: arithmetic expression: expecting primary: "100000 * + 100 * + "
Thus detect failure exit codes when calling `$RUSTC` and `$BINDGEN` and
print a better message, in a similar way to what we do when extracting
the `libclang` version found by `bindgen`.
Link: https://lore.kernel.org/rust-for-linux/CAK7LNAQYk6s11MASRHW6oxtkqF00EJVqhHOP=5rynWt-QDUsXw@mail.gmail.com/
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Link: https://lore.kernel.org/r/20230616001631.463536-10-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Stable-dep-of: 5ce86c6c8613 ("rust: suppress error messages from CONFIG_{RUSTC,BINDGEN}_VERSION_TEXT")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7cd6a3e1f94bab4f2a3425e06f70ab13eb8190d4 ]
In order to match the version string, `sed` is used in a couple
cases, and `grep` and `head` in a couple others.
Make the script more consistent and easier to understand by
using the same method, `sed`, for all of them.
This makes the version matching also a bit more strict for
the changed cases, since the strings `rustc ` and `bindgen `
will now be required, which should be fine since `rustc`
complains if one attempts to call it with another program
name, and `bindgen` uses a hardcoded string.
In addition, clarify why one of the existing `sed` commands
does not provide an address like the others.
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Link: https://lore.kernel.org/r/20230616001631.463536-9-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Stable-dep-of: 5ce86c6c8613 ("rust: suppress error messages from CONFIG_{RUSTC,BINDGEN}_VERSION_TEXT")
Signed-off-by: Sasha Levin <sashal@kernel.org>
This is the 6.1.84 stable release
* tag 'v6.1.84': (1865 commits)
Linux 6.1.84
tools/resolve_btfids: fix build with musl libc
USB: core: Fix deadlock in usb_deauthorize_interface()
x86/sev: Skip ROM range scans and validation for SEV-SNP guests
scsi: libsas: Fix disk not being scanned in after being removed
scsi: libsas: Add a helper sas_get_sas_addr_and_dev_type()
scsi: lpfc: Correct size for wqe for memset()
scsi: lpfc: Correct size for cmdwqe/rspwqe for memset()
tls: fix use-after-free on failed backlog decryption
x86/cpu: Enable STIBP on AMD if Automatic IBRS is enabled
scsi: qla2xxx: Delay I/O Abort on PCI error
scsi: qla2xxx: Change debug message during driver unload
scsi: qla2xxx: Fix double free of fcport
scsi: qla2xxx: Fix command flush on cable pull
scsi: qla2xxx: NVME|FCP prefer flag not being honored
scsi: qla2xxx: Update manufacturer detail
scsi: qla2xxx: Split FCE|EFT trace control
scsi: qla2xxx: Fix N2N stuck connection
scsi: qla2xxx: Prevent command send on chip reset
usb: typec: ucsi: Clear UCSI_CCI_RESET_COMPLETE before reset
...
Change-Id: If6edd552c88012d97f5eefc5e1d97a4f1683f171
Conflicts:
drivers/gpu/drm/bridge/sii902x.c
drivers/gpu/drm/rockchip/rockchip_lvds.c
drivers/media/i2c/imx335.c
drivers/usb/dwc3/gadget.c
drivers/usb/host/xhci-plat.c
sound/soc/rockchip/rockchip_i2s_tdm.c
[ Upstream commit 712aba5543b88996bc4682086471076fbf048927 ]
As commit afa974b771 ("kbuild: add real-prereqs shorthand for
$(filter-out FORCE,$^)") explained, $(real-prereqs) is not just a list
of objects when linking a multi-object module. If a single-object module
is turned into a multi-object module, $^ (and therefore $(real-prereqs)
as well) contains header files recorded in the *.cmd file. Such headers
must be filtered out.
Now that a DTB can be built either from a single source or multiple
source files, the same issue can occur.
Consider the following scenario:
First, foo.dtb is implemented as a single-blob device tree.
The code looks something like this:
[Sample Code 1]
Makefile:
dtb-y += foo.dtb
foo.dts:
#include <dt-bindings/gpio/gpio.h>
/dts-v1/;
/ { };
When it is compiled, .foo.dtb.cmd records that foo.dtb depends on
scripts/dtc/include-prefixes/dt-bindings/gpio/gpio.h.
Later, foo.dtb is split into a base and an overlay. The code looks
something like this:
[Sample Code 2]
Makefile:
dtb-y += foo.dtb
foo-dtbs := foo-base.dtb foo-addon.dtbo
foo-base.dts:
#include <dt-bindings/gpio/gpio.h>
/dts-v1/;
/ { };
foo-addon.dtso:
/dts-v1/;
/plugin/;
/ { };
If you rebuild foo.dtb without 'make clean', you will get this error:
Overlay 'scripts/dtc/include-prefixes/dt-bindings/gpio/gpio.h' is incomplete
$(real-prereqs) contains not only foo-base.dtb and foo-addon.dtbo but
also scripts/dtc/include-prefixes/dt-bindings/gpio/gpio.h, which is
passed to scripts/dtc/fdtoverlay.
Fixes: 15d16d6dad ("kbuild: Add generic rule to apply fdtoverlay")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3415b10a03945b0da4a635e146750dfe5ce0f448 upstream.
After a recent change in clang to stop consuming all instances of '-S'
and '-c' [1], the stack protector scripts break due to the kernel's use
of -Werror=unused-command-line-argument to catch cases where flags are
not being properly consumed by the compiler driver:
$ echo | clang -o - -x c - -S -c -Werror=unused-command-line-argument
clang: error: argument unused during compilation: '-c' [-Werror,-Wunused-command-line-argument]
This results in CONFIG_STACKPROTECTOR getting disabled because
CONFIG_CC_HAS_SANE_STACKPROTECTOR is no longer set.
'-c' and '-S' both instruct the compiler to stop at different stages of
the pipeline ('-S' after compiling, '-c' after assembling), so having
them present together in the same command makes little sense. In this
case, the test wants to stop before assembling because it is looking at
the textual assembly output of the compiler for either '%fs' or '%gs',
so remove '-c' from the list of arguments to resolve the error.
All versions of GCC continue to work after this change, along with
versions of clang that do or do not contain the change mentioned above.
Cc: stable@vger.kernel.org
Fixes: 4f7fd4d7a7 ("[PATCH] Add the -fstack-protector option to the CFLAGS")
Fixes: 60a5317ff0 ("x86: implement x86_32 stack protector")
Link: 6461e53781 [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 77a92660d8fe8d29503fae768d9f5eb529c88b36 ]
expr_trans_bool() performs an incorrect transformation.
[Test Code]
config MODULES
def_bool y
modules
config A
def_bool y
select C if B != n
config B
def_tristate m
config C
tristate
[Result]
CONFIG_MODULES=y
CONFIG_A=y
CONFIG_B=m
CONFIG_C=m
This output is incorrect because CONFIG_C=y is expected.
Documentation/kbuild/kconfig-language.rst clearly explains the function
of the '!=' operator:
If the values of both symbols are equal, it returns 'n',
otherwise 'y'.
Therefore, the statement:
select C if B != n
should be equivalent to:
select C if y
Or, more simply:
select C
Hence, the symbol C should be selected by the value of A, which is 'y'.
However, expr_trans_bool() wrongly transforms it to:
select C if B
Therefore, the symbol C is selected by (A && B), which is 'm'.
The comment block of expr_trans_bool() correctly explains its intention:
* bool FOO!=n => FOO
^^^^
If FOO is bool, FOO!=n can be simplified into FOO. This is correct.
However, the actual code performs this transformation when FOO is
tristate:
if (e->left.sym->type == S_TRISTATE) {
^^^^^^^^^^
While it can be fixed to S_BOOLEAN, there is no point in doing so
because expr_tranform() already transforms FOO!=n to FOO when FOO is
bool. (see the "case E_UNEQUAL" part)
expr_trans_bool() is wrong and unnecessary.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46edf4372e336ef3a61c3126e49518099d2e2e6d ]
Currently, the initial state of the "Save" button is always active.
If none of the CONFIG options are changed while loading the .config
file, the "Save" button should be greyed out.
This can be fixed by calling conf_read() after widget initialization.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9852f47ac7c993990317570ff125e30ad901e213 ]
After [1] in upstream LLVM, ld.lld's version output became slightly
different when the cmake configuration option LLVM_APPEND_VC_REV is
disabled.
Before:
Debian LLD 19.0.0 (compatible with GNU linkers)
After:
Debian LLD 19.0.0, compatible with GNU linkers
This results in ld-version.sh failing with
scripts/ld-version.sh: 18: arithmetic expression: expecting EOF: "10000 * 19 + 100 * 0 + 0,"
because the trailing comma is included in the patch level part of the
expression. While [1] has been partially reverted in [2] to avoid this
breakage (as it impacts the configuration stage and it is present in all
LTS branches), it would be good to make ld-version.sh more robust
against such miniscule changes like this one.
Use POSIX shell parameter expansion [3] to remove the largest suffix
after just numbers and periods, replacing of the current removal of
everything after a hyphen. ld-version.sh continues to work for a number
of distributions (Arch Linux, Debian, and Fedora) and the kernel.org
toolchains and no longer errors on a version of ld.lld with [1].
Fixes: 02aff85922 ("kbuild: check the minimum linker version in Kconfig")
Link: 0f9fbbb63c [1]
Link: 649cdfc4b6 [2]
Link: https://pubs.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html [3]
Suggested-by: Fangrui Song <maskray@google.com>
Reviewed-by: Fangrui Song <maskray@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 6a59cb5158bff13b80f116305155fbe4967a5010 upstream.
--0000000000009a0c9905fd9173ad
Content-Transfer-Encoding: 8bit
After f15afbd34d8f ("fs: fix undefined behavior in bit shift for
SB_NOUSER") the constants were changed from plain integers which
LX_VALUE() can parse to constants using the BIT() macro which causes the
following:
Reading symbols from build/linux-custom/vmlinux...done.
Traceback (most recent call last):
File "/home/fainelli/work/buildroot/output/arm64/build/linux-custom/vmlinux-gdb.py", line 25, in <module>
import linux.constants
File "/home/fainelli/work/buildroot/output/arm64/build/linux-custom/scripts/gdb/linux/constants.py", line 5
LX_SB_RDONLY = ((((1UL))) << (0))
Use LX_GDBPARSED() which does not suffer from that issue.
f15afbd34d8f ("fs: fix undefined behavior in bit shift for SB_NOUSER")
Link: https://lkml.kernel.org/r/20230607221337.2781730-1-florian.fainelli@broadcom.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Cc: Hao Ge <gehao@kylinos.cn>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit aabdc960a283ba78086b0bf66ee74326f49e218e ]
Currently, comparisons to 'm' or 'n' result in incorrect output.
[Test Code]
config MODULES
def_bool y
modules
config A
def_tristate m
config B
def_bool A > n
CONFIG_B is unset, while CONFIG_B=y is expected.
The reason for the issue is because Kconfig compares the tristate values
as strings.
Currently, the .type fields in the constant symbol definitions,
symbol_{yes,mod,no} are unspecified, i.e., S_UNKNOWN.
When expr_calc_value() evaluates 'A > n', it checks the types of 'A' and
'n' to determine how to compare them.
The left-hand side, 'A', is a tristate symbol with a value of 'm', which
corresponds to a numeric value of 1. (Internally, 'y', 'm', and 'n' are
represented as 2, 1, and 0, respectively.)
The right-hand side, 'n', has an unknown type, so it is treated as the
string "n" during the comparison.
expr_calc_value() compares two values numerically only when both can
have numeric values. Otherwise, they are compared as strings.
symbol numeric value ASCII code
-------------------------------------
y 2 0x79
m 1 0x6d
n 0 0x6e
'm' is greater than 'n' if compared numerically (since 1 is greater
than 0), but smaller than 'n' if compared as strings (since the ASCII
code 0x6d is smaller than 0x6e).
Specifying .type=S_TRISTATE for symbol_{yes,mod,no} fixes the above
test code.
Doing so, however, would cause a regression to the following test code.
[Test Code 2]
config MODULES
def_bool n
modules
config A
def_tristate n
config B
def_bool A = m
You would get CONFIG_B=y, while CONFIG_B should not be set.
The reason is because sym_get_string_value() turns 'm' into 'n' when the
module feature is disabled. Consequently, expr_calc_value() evaluates
'A = n' instead of 'A = m'. This oddity has been hidden because the type
of 'm' was previously S_UNKNOWN instead of S_TRISTATE.
sym_get_string_value() should not tweak the string because the tristate
value has already been correctly calculated. There is no reason to
return the string "n" where its tristate value is mod.
Fixes: 31847b67be ("kconfig: allow use of relations other than (in)equality")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 41bdc6decda074afc4d8f8ba44c69b08d0e9aff6 upstream.
With commit c1177979af9c ("btf, scripts: Exclude Rust CUs with pahole")
we are now able to use pahole directly to identify Rust compilation
units (CUs) and exclude them from generating BTF debugging information
(when DEBUG_INFO_BTF is enabled).
And if pahole doesn't support the --lang-exclude flag, we can't enable
both RUST and DEBUG_INFO_BTF at the same time.
So, in any case, the script is_rust_module.sh is just redundant and we
can drop it.
NOTE: we may also be able to drop the "Rust loadable module" mark
inside Rust modules, but it seems safer to keep it for now to make sure
we are not breaking any external tool that may potentially rely on it.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Acked-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/20230704052136.155445-1-andrea.righi@canonical.com
[ Picked the `Reviewed-by`s from the old patch too. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
